商品供应商Pneumatic Mid-Back Executive Office Chair，Green woven fabric or leather-look textile over molded foam; exact face material requires supplier BOM confirmation.
可联系供应商获取生产周期与报价。
PRODUCT MODULE 01 / 06
基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源：工厂资料结构化字段，最终以实测值为准
| 产品外部尺寸（宽 × 深 × 高） | 730 × 660 × 1100 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源：产品性能数据，采购前请核对具体测试口径
| Recommended user weight capacity | 136 kg | |
|---|---|---|
| Net weight | 16.5 kg | |
| Static seat verification load | 680 kg | |
| Caster rolling durability target | 100000 cycles | |
| Gas-lift cycles target | 100000 cycles | |
| Backrest cyclic load target | 120000 cycles | |
| Armrest vertical static load target | 90 kg per arm | |
| Seat foam density | 45 kg/m3 | |
| Back foam density | 35 kg/m3 | |
| Foam resilience | 40% |
PRODUCT MODULE 03 / 06
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源：以工厂材质清单与验货报告为准
| Seat upholstery | Green woven fabric or leather-look textile over molded foam; exact face material requires supplier BOM confirmation. | |
|---|---|---|
| Back upholstery | Padded two-section green back with a light-colored rear panel and stitched perimeter. | |
| Seat cushion | Molded high-resilience foam, 80 mm thick at the center over a load-bearing seat shell. | |
| Internal back board | 12 mm molded plywood or polymer back board with steel reinforcement brackets. | |
| Armrests | Fixed black polymer arm pads on black curved support posts connected to the seat mechanism. | |
| Gas lift | 45 mm diameter chromed steel pneumatic cylinder with black telescopic sleeve. |
PRODUCT MODULE 04 / 06
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源：功能配置参数，以供应商正式规格为准
| Pneumatic height adjustment | Side lever raises and lowers the seat from 460 to 510 mm through a 50 mm gas-lift stroke. | |
|---|---|---|
| Tilt movement | Center-tilt mechanism allows synchronized seat and back recline to a 12-degree rearward angle. | |
| Tilt lock and tension | Single lever locks the upright position; tension knob adjusts resistance for users up to 136 kg. | |
| Mobility | Five twin-wheel swivel casters enable rolling on hard floors or low-pile carpet. |
PRODUCT MODULE 05 / 06
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源：外贸报价与装柜测算参考
| Carton dimensions | 760 x 660 x 420 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set |
PRODUCT MODULE 06 / 06
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源：依据产品结构与品类整理的推荐应用场景
| Managerial and administrative workstations | Suitable for 8-hour desk work where padded lumbar support, swivel access and 510 mm seat height support standard 760 mm desks. | |
|---|---|---|
| Meeting rooms and private offices | Green upholstery and polished aluminum base suit executive offices, meeting rooms and reception workstations with hard floors or low-pile carpet. |
STANDARD S1
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
| EN 1335-1 | Office furniture seating dimensions: applies to seat height, depth, clearance and ergonomic dimensional verification. | |
|---|---|---|
| EN 1335-2 | Office furniture seating safety requirements: applies to structural safety and stability verification. | |
| EN 1335-3 | Office furniture seating test methods: applies to strength, durability and stability acceptance testing. |
STANDARD S2
北美市场采购验货参考 * ANSI/BIFMA 标准
美国及加拿大家具标准
| ANSI/BIFMA X5.1 | Office chairs standard: applies to stability, back, seat, arm, base and caster durability verification. | |
|---|---|---|
| BIFMA e3 level | Multi-attribute sustainability certification is optional and must be evidenced by the supplier before claiming compliance. |
STANDARD S3
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
| GB/T 10357.2 | Furniture mechanical test for chairs and stools: backrest strength and durability applies to procurement verification. | |
|---|---|---|
| GB/T 10357.3 | Furniture mechanical test for chairs and stools: seat front edge and static/dynamic loading applies. | |
| GB/T 27927 | Office chair classification and performance requirements can guide commercial-grade inspection scope. |
招标文件标准化描述文本
本产品须满足以下技术参数要求： 1. GB/T 10357.2：Furniture mechanical test for chairs and stools: backrest strength and durability applies to procurement verification.； 2. GB/T 10357.3：Furniture mechanical test for chairs and stools: seat front edge and static/dynamic loading applies.； 3. GB/T 27927：Office chair classification and performance requirements can guide commercial-grade inspection scope.； 最终交付参数、检测报告和验收标准以双方采购合同为准。
GENERATED EXPORTS
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告，可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块，文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具