The Upholstered High-Back Guest Chair with Polished Sled Base is a structured visitor and meeting chair with a refined, upright silhouette. Its light beige soft upholstery, continuous high back, and integrated padded arm surrounds create a tailored guest-seating appearance, while the polished chrome sled frame gives the design a clean, linear profile and an open visual base. Stitched upholstery adds definition to the seating form, and the non-swivel layout supports a settled position suited to formal interaction. Overall dimensions are 620 x 680 x 1020 mm, with 540 mm of clear width between the arms. Construction pairs a 1.2 mm corrected-grain leather-look outer upholstery with high-resilience polyurethane seat foam and molded polyurethane back foam. The seat uses 45 kg/m3 foam at 90 mm thick, while the back uses 35 kg/m3 foam at 60 mm thick. A 12 mm molded plywood or engineered composite seat board provides internal support, and the arms combine padded upholstery with 1.2 mm steel or hardwood inner support. The frame is made from chrome-plated steel: 25 x 2.0 mm tube forms the sled legs and 30 x 20 x 1.5 mm oval tube forms the floor runners, finished in polished chrome plating. Four replaceable nylon or TPE glides help reduce floor scratches and noise. Designed for one person, the fixed chair has a 460 mm seat height and integrated arms at 690 mm floor height. The continuous 560 mm high back includes a 110 mm padded lumbar zone, with a listed lumbar support zone height of 240 mm. It also provides 10-degree flexible back give with automatic return, without adding a swivel or caster-based mobility system. The chair is non-stacking and can be repositioned by lifting or sliding as needed. It is appropriate for boardrooms, conference rooms, executive reception areas, manager offices, interview and training rooms, and refined hospitality lounges where an upright posture is preferred. Its lack of casters makes it especially suitable for positions where unintended movement should be minimized. For project procurement, the chair is commonly considered in pairs or sets around conference tables. Supplied unbranded under model VST-SLED-HB-620, it ships as one set in two cartons, with reference assembly time of 40 minutes per set. Buyers should review the alternative breathable polyurethane-coated fabric option, glide type for the intended floor, room layout, desk or table height, delivery volume, assembly requirements, and seating quantities for coordinated meeting spaces.