商家入驻
首页 > 首页 > 办公桌椅家具 > 办公椅系列 > 老板大班椅 > GO-2286H-GR-GG

Flash Furniture High Back Gray LeatherSoft Executive Swivel Office Chair Specifications

GO-2286H-GR-GG

代码:ZD678RV1
获取供应商报价
2026-09-23 14:58人气: 3
参数纠错历史记录(所有访客可见)
纠错时间修改字段原参数修改后参数说明 / 状态
暂无参数纠错记录,发现错误可点击行末旗标提交

GO-2286H-GR-GG

1家生产中供应商 >>
PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源:工厂资料结构化字段,最终以实测值为准

Overall dimensions660 x 686 x 1092 mm
Finished Seat Cushion Thickness90 mm
Backrest Padding Thickness70 mm
Lumbar Support Zone Height240 mm
Clear Width Between Armrests540 mm
PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源:产品性能数据,采购前请核对具体测试口径

Recommended user weight capacity113 kg
Net product weight13.6 kg
Shipping weight22.3 kg
Swivel travel360 degrees
Seat-height lift travel116 mm
Recommended user height range1550 to 1900 mm
Foam density acceptance target35 kg/m3
Foam resilience acceptance target35 percent
Gas-lift durability acceptance target100000 cycles
Tilt mechanism durability acceptance target300000 cycles
PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源:以工厂材质清单与验货报告为准

Seat and back upholsteryGray LeatherSoft upholstery over padded cushions
Headrest paddingUpholstered padded headrest integrated with high back
Seat foamCAL 117 fire-retardant foam
Back lumbar paddingContoured padded lumbar zone in the lower back
Fixed arm padsGray upholstered pads supported by chrome-finished arm structures
Arm support finishPolished chrome-plated metal support with welded appearance
Five-star basePolished chrome-finished metal five-star pedestal
Gas lift and columnChrome outer sleeve with black central gas-lift tube
Caster constructionFive black dual-wheel hard-surface casters with chrome mounting forks
Internal support board25 mm molded wood or engineered composite seat board
Upholstery seam constructionHorizontal stitched face seams with 8 mm stitch pitch
Mechanism coverBlack steel tilt mechanism with exposed control lever under seat
PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源:功能配置参数,以供应商正式规格为准

Pneumatic seat-height adjustmentUnder-seat lever raises the seat through 116 mm of gas-lift travel
Tilt-lock functionLever-operated tilt lock secures the upright back position
Tilt tension controlRotary knob changes resistance for user body weight and recline force
Recline movementConventional center-tilt movement with 12-degree maximum recline
Swivel movement360-degree swivel around the central gas-lift column
Rolling mobilityFive dual-wheel casters provide omnidirectional movement on hard floors and low-pile carpet
Lumbar supportBuilt-in contoured lumbar padding provides passive lower-back support
Arm supportFixed upholstered arms at 230 mm above the seat provide elbow support without width or height adjustment
Waterfall seat edgeRounded front cushion edge reduces pressure behind the knees
Assembly requirementChair ships knockdown and requires base, caster, arm and back assembly
Recline Angle / Lock Reference125° with 3suggested lock positions
Tilt Tension User-weight RangeReference adjustment coverage 120 kg
PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源:外贸报价与装柜测算参考

Reference Package Count1 set / 2 cartons
Reference Assembly Time40 minutes per set
Reference Carton Dimensions850× 420× 720 mm
Reference Packaged Gross Weight23 kg/set
Reference Carton Volume0.26 m³/set
Indicative 20GP Loading135 sets at 85% space utilization
Indicative 40HQ Loading320 sets at 85% space utilization
PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源:依据产品结构与品类整理的推荐应用场景

Executive officeSuits manager and director offices where a gray upholstered high-back chair complements formal desks
Private workstationProvides seated support for 113 kg users at standard 720 to 760 mm desks
Meeting room leadership seatSuitable for conference rooms needing a mobile swivel chair rather than a fixed guest chair
Home officeFits professional home workspaces with carpet or hard-floor protection and standard desk clearance
Reception or counseling deskAppropriate for staff seating behind reception counters when task mobility and formal appearance are required
Recommended floor protectionUse chair mat on soft carpet or sensitive wood flooring to preserve caster rolling and floor finish
Recommended desk setupPair with monitor height 500 to 560 mm above seat and keyboard near elbow height
Recommended Matching Desk Size2.4 m executive desk
STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1 office furniture dimensionsUse dimensional safety and fit requirements for swivel office chairs
EN 1335-2 safety requirementsApply structural safety, stability and caster requirements for office task seating
EN 1335-3 test methodsUse specified static, durability and impact test methods for chair acceptance
EN 1021-1 cigarette ignitionUse upholstered seating smouldering ignition assessment if fire compliance is required
EN 1021-2 match-flame ignitionUse upholstered seating flame-ignition assessment where project fire specs require it
STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1 base testApply five-star base static and cyclic load verification for 113 kg user capacity
ANSI/BIFMA X5.11 large occupant seatingDo not classify this chair as large-occupant seating without separate 159 kg verification
STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.3 furniture strength and durabilityApplicable standards and test results require confirmation
GB/T 27924-2011 office chair applicabilityApply office-chair stability, strength, durability and safety inspection criteria
GB 17927 upholstered furniture safetyUse as the upholstered furniture fire and safety acceptance reference
GB/T 3324-2017 general furniture technical requirementsApply dimensional, coating, material and workmanship inspection requirements
GB/T 39223-2020 product safety technical requirementUse as a general furniture chemical and hazardous-substance control reference
招标文件标准化描述文本
本产品须满足以下技术参数要求:
1. GB/T 10357.3 furniture strength and durability:Applicable standards and test results require confirmation;
2. GB/T 27924-2011 office chair applicability:Apply office-chair stability, strength, durability and safety inspection criteria;
3. GB 17927 upholstered furniture safety:Use as the upholstered furniture fire and safety acceptance reference;
4. GB/T 3324-2017 general furniture technical requirements:Apply dimensional, coating, material and workmanship inspection requirements;
5. GB/T 39223-2020 product safety technical requirement:Use as a general furniture chemical and hazardous-substance control reference;
最终交付参数、检测报告和验收标准以双方采购合同为准。
GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告,可选择公制或英制单位。

PDF · GO-2286H-GR-GG

完整参数 Excel

导出全部商品信息与参数模块,文件内容统一使用英文。

XLSX · GO-2286H-GR-GG

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段,可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · GO-2286H-GR-GG打开导出工具

页面快速操作

发布采购询价

产品描述

The Flash Furniture GO-2286H-GR-GG is a high-back executive swivel office chair with a polished, professional appearance suited to both commercial and residential workspaces. Its gray LeatherSoft upholstery covers the padded seat, tall back, integrated headrest, and fixed arm pads, creating a coordinated look with a formal desk environment. Chrome-finished metal supports and a five-star pedestal add contrast to the gray upholstery, while the black central gas-lift tube and black dual-wheel casters complete the chair’s visual composition. The contoured lumbar zone is shaped into the lower back, supporting the chair’s executive silhouette rather than appearing as a separate attachment. Overall dimensions are 660 x 686 x 1092 mm, with a clear width of 540 mm between armrests. Construction combines padded LeatherSoft surfaces with CAL 117 fire-retardant foam. The finished seat cushion is 90 mm thick, the backrest padding is 70 mm thick, and the lumbar support zone is 240 mm high. The stated foam density acceptance target is 35 kg/m3. Fixed arms use gray upholstered pads on polished chrome-plated metal supports with a welded appearance. The polished chrome-finished five-star base carries five black dual-wheel hard-surface casters with chrome mounting forks. The chair has a net weight of 13.6 kg and a recommended user weight capacity of 113 kg, with a recommended user height of 1900 mm. Functionality is centered on flexible executive-task seating. A 360-degree swivel rotates around the central gas-lift column, and an under-seat lever provides pneumatic height adjustment through 116 mm of travel. The conventional center-tilt mechanism offers a 12-degree maximum recline, a lever-operated tilt lock to secure the upright position, and a rotary tension knob for adjusting resistance to body weight and recline force. Built-in contoured lumbar padding provides passive lower-back support. Omnidirectional dual-wheel casters allow movement on hard floors and low-pile carpet. This model is appropriate for manager and director offices, private workstations with standard 720 to 760 mm desks, conference-room leadership seating, professional home offices, and reception or counseling positions where staff require mobility and a formal appearance. For procurement planning, the chair ships as one set in two cartons, with a shipping weight of 22.3 kg and packaged gross weight of 23 kg. Reference assembly time is 40 minutes per set, carton dimensions are 850 x 420 x 720 mm, and carton volume is 0.26 m3 per set. A chair mat is recommended on soft carpet or sensitive wood flooring to protect floor finishes and maintain caster rolling.

参数纠错提交 - GO-2286H-GR-GG · ZD678R

修改错误参数(改动哪项就填哪项)

上传纠错凭证(产品实拍 / 规格书,选填)

最多 5 个文件,单个不超过 10MB;支持 JPG、PNG、WebP、PDF、Word、Excel。

错误说明与正确数据依据(必填)

联系方式(选填)

同类产品推荐

商品对比清单0