The Mesh Back Cantilever Visitor Office Chair, model OC-CB-M046 from an unbranded line, is a purpose-built conference and visitor seating solution sized at 595 x 540 x 980 mm with a clean, streamlined silhouette suited to professional settings. Its visual profile balances structured support and lightness: the open mesh backrest is paired with fixed loop-style grey polypropylene armrests and a continuous cantilever sled frame, creating a consistent, understated look that coordinates with standard office furnishings without visual clutter. The 540 mm clear width between armrests provides generous personal space for users, while the fixed 450 mm seat height aligns seamlessly with common work surface heights. Constructed for long-term regular use, the chair features a flexible breathable polyester mesh backrest stretched over a glass-fiber reinforced polypropylene inner frame, with a contoured 240 mm tall built-in lumbar support zone. The seat uses a 50 mm thick high-resilience molded polyurethane foam core at 45 kg/m³ density, wrapped in woven polyester fabric with 30000-cycle abrasion resistance, set atop a 14 mm bent plywood internal support board for a total finished seat cushion thickness of 90 mm. The 22 mm diameter powder-coated round steel tube cantilever frame is fitted with replaceable non-marking black nylon glides at all floor contact points, and supports a static load of 150 kg with a recommended maximum user weight of 110 kg. Fixed polypropylene armrests offer 180 mm of vertical clearance above the seat, and the non-swivel, non-adjustable design holds a 125° seated angle. This chair delivers consistent, low-maintenance support with no tilt, height adjustment, or recline mechanisms to service, and its stable non-rolling base prevents unintended movement across surfaces. The breathable mesh back supports air circulation for user comfort during extended sessions, while non-marking glides protect hard tile, wood, and low-pile carpeted floors from scratches. It is ideally suited for formal conference rooms paired with 750 mm high conference tables, reception waiting areas, the guest side of open office desks for short consultations, and training facilities, and coordinates seamlessly with 760 mm high office desks and reception counters. For procurement planning, note the chair is non-stackable, ships as one set across two cartons with a packaged gross weight of 23 kg per set, and requires 40 minutes of assembly per unit. A 20-foot GP container holds 135 sets at 85% space utilization, and each unit has a net weight of 10 kg for easy placement and reconfiguration as needed.