The Mesh Back Cantilever Conference Office Chair (model CFC-MESH-SLED-1025) is an unbranded fixed-position visitor and conference seating solution built for consistent commercial office use. Its streamlined mid-back silhouette features a tensioned breathable polyester mesh back set within a 22mm diameter reinforced PP inner frame, anchored by a wide 25mm diameter powder-coated steel sled base that delivers balanced, even floor contact. The fixed integrated curved PP lumbar support pad sits flush within the mesh back to encourage upright seated posture, while fixed-height impact-resistant PP armrests with padded tops align neatly to standard conference table heights. The seat uses a high-density polyurethane foam core resting on a 14mm bent plywood support pan, upholstered in woven polyester fabric, with a contoured waterfall front edge that reduces pressure on the backs of the legs during extended seated sessions. Non-slip, anti-scuff PP floor glides are fitted to the base ends to protect hard office flooring without the risk of scuffs or surface damage during repositioning. The chair measures 645 x 570 x 1025 mm overall, with a 505 mm wide, 460 mm deep seat positioned 480 mm from the floor, paired with a 580 mm tall backrest and armrest tops set 685 mm from the floor. Built to support a 136 kg static load, the chair features mesh fabric rated for 50,000 abrasion cycles, a non-swivel, non-tilt structure with a 125-degree recline and three suggested lock positions, and a lightweight 7.5 kg net weight per unit that makes reconfiguration straightforward. This seating is well suited for conference rooms, where its uniform cantilever form supports clean, aligned arrangements around meeting tables including 2.4 m executive desks, as well as reception waiting areas, corporate training rooms, and open office workstation guest zones, where it holds up to heavy daily use by both staff and visitors. When procuring, note that each unit ships across two cartons with a total packaged gross weight of 23 kg, requires 40 minutes of assembly per set, and that a 20-foot GP container can hold 135 sets at 85% space utilization to support bulk ordering for large-space fit-outs.