纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1650 × 2240 × 950 mm
Headboard height from floor	950 mm
Side/foot rail height from floor	300 mm
Recommended mattress thickness	300 mm
Mattress support platform width	1530 mm
Mattress support platform length	2030 mm
Headboard thickness at padded edge	110 mm
Side rail thickness	220 mm
Under-bed clearance from floor	0 mm
Headboard wrap extension along side rail	200 mm
Slat Spacing	80 mm
Center Support Leg Count	Recommended 6legs

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total static weight capacity	545 kg
Product net weight	77 kg
Recommended maximum user count	2
Wood slat count	14
Wood slat thickness	35 mm
Slat spacing between supports	75 mm
Center support beam count	1
Foam padding density	35 kg/m³
Fabric abrasion resistance (Martindale)	30000 cycles
Bed Static Load Reference	400 kg

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

External upholstery	100% polyester boucle (teddy fleece) fabric, warm taupe grey
Upholstery padding	30mm thick high-resilience polyurethane foam
Internal frame core	18mm thick engineered plywood with metal reinforcement brackets
Mattress support slats	Solid poplar wood slats, sanded smooth, noise-dampening felt strips
Center support structure	Rectangular steel tube support beam running lengthwise under slats
Edge finishing	Concealed stitching with 8mm seam pitch, rounded R100mm soft corners
Frame base	Non-slip felt floor protection pads on bottom contact points
Hardware components	Zinc-plated steel connector bolts and barrel nuts
Slat Thickness	15 mm bent plywood or solid timber
Primary Connector Specification	Reference M8-M10 bolts with at least 2 fixing points per corner
Reference Finish / Color Count	Recommended 6timber/upholstery options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Mattress support system	Solid wood slat platform, no box spring required
Anti-slip mattress retention	Recessed platform ledge with U-shaped anti-slip buckles
Noise reduction design	Felt strips between slats and frame, tight-fit hardware connectors
Safety edge design	All exposed corners rounded and fully padded, no sharp hard edges
Headboard function	Full-width padded curved headboard provides back support for upright sitting
Assembly requirement	Knock-down assembly with included tools and illustrated instructions
Floor contact design	Full perimeter low-profile base sits directly on floor, no external legs
Fabric care requirement	Spot clean only with mild upholstery cleaner, avoid direct prolonged sunlight
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2300× 900× 450 mm/carton in 4 cartons
Reference Packaged Gross Weight	130 kg/set
Reference Packaging Volume	0.9 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential master bedroom	Suitable for queen-size layout, low profile creates open, uncluttered visual space
Minimalist/modern interior schemes	Soft curved silhouette and neutral boucle texture fits contemporary, Japandi, or quiet luxury decor
Guest bedroom use	Neutral finish and low profile suits flexible guest space design for visitors
Low-platform design preference	Ideal for users preferring floor-sitting, low bed height without under-bed storage
Soft safety priority spaces	Fully padded rounded edges suitable for households with young children to reduce impact risk
Mattress compatibility	Works with memory foam, latex, hybrid, or innerspring mattresses up to 300mm thickness

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1725:1998	Applicable for domestic bed safety requirements, including edge and strength performance
EN 1021-1:2014	Applicable for upholstered furniture flammability (cigarette ignition resistance) for residential use

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	Applicable for general technical requirements of wooden furniture, including frame strength and dimensional stability
GB 18584-2001	Applicable for limit of formaldehyde emission from wood-based panel furniture components
GB/T 19889.7-2005	Applicable for furniture impact resistance testing for upholstered bed edges and components

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：Applicable for general technical requirements of wooden furniture, including frame strength and dimensional stability；
2. GB 18584-2001：Applicable for limit of formaldehyde emission from wood-based panel furniture components；
3. GB/T 19889.7-2005：Applicable for furniture impact resistance testing for upholstered bed edges and components；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · UPB-BOUCLE-TAUPE-LOW-Q

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · UPB-BOUCLE-TAUPE-LOW-Q

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · UPB-BOUCLE-TAUPE-LOW-Q打开导出工具

页面快速操作

发布采购询价

产品描述

The Curved Wrap-Around Boucle Upholstered Low-Profile Queen Platform Bed delivers a refined, understated silhouette defined by its continuous wrap-around curved headboard, fully rounded soft corners, and legless floor-sitting base that sits flush against the floor. The low-profile form creates a streamlined, unobtrusive visual presence, with consistent padding across all exposed surfaces and concealed, evenly spaced stitching that lends a clean, seamless finish across the warm taupe grey upholstery. Built for lasting daily use, the bed features an engineered plywood core frame reinforced with metal brackets, paired with a lengthwise rectangular steel tube center support beam. Its mattress support system uses smooth-sanded solid poplar wood slats fitted with noise-dampening felt strips between slats and the frame, secured with zinc-plated steel connector bolts and barrel nuts. All exterior surfaces are upholstered in 100% polyester boucle teddy fleece fabric, padded with high-resilience polyurethane foam, with non-slip felt pads fixed to all base contact points to protect floor surfaces. Functionally, the bed eliminates the need for a separate box spring, with a recessed platform ledge and U-shaped anti-slip buckles to hold mattresses securely in place. The full-width padded curved headboard offers stable back support for upright sitting in bed, while fully padded rounded edges remove sharp hard contact points to reduce impact risk. Tight-fit hardware and felt buffer strips minimize operational noise during use. The bed ships in knock-down form with included tools and illustrated instructions for straightforward assembly. This platform bed fits seamlessly in residential master bedrooms with queen-sized layouts, where its low profile fosters an open, uncluttered feel. It complements modern, minimalist, Japandi, and quiet luxury interior schemes, and works equally well in guest bedrooms where its neutral finish supports flexible space design. It is ideally suited for users who prefer low, floor-aligned bed heights without under-bed storage, and for households prioritizing soft, impact-resistant surfaces for young children. It is compatible with memory foam, latex, hybrid, and innerspring mattresses of matching queen dimensions. For procurement planning, note the unit ships across multiple cartons, with a total packaged gross weight of 130kg, requiring two-person handling for transport and assembly. All required assembly hardware and guidance are included, with a typical assembly time of 40 minutes per unit. Verify intended space dimensions and preferred mattress thickness prior to purchase to ensure proper fit, and confirm surface finish alignment with existing interior palettes.

Curved Wrap-Around Boucle Upholstered Low-Profile Queen Platform Bed Specifications

供应商与现货