This Deep Blue Tufted Velvet Upholstered Queen Size Platform Bed, model UPB-QN-TFT-BLU-01, features a refined low-profile contemporary silhouette defined by its curved wrap-around headboard, finished with consistent pulled-button diamond tufting secured with hidden fabric buttons. The uniform diamond tuft pattern extends across matching deep blue velvet on the side and foot rails, creating a cohesive, polished visual presence that sits 80mm above finished floor level. The bed is built on a kiln-dried solid pine inner frame with 30mm thick structural members, reinforced with zinc-plated steel corner brackets and M8-M10 bolts that provide a minimum of two fixing points per corner, supporting up to five controlled assembly cycles. The slat support system uses 15mm bent plywood or solid timber slats, held within 40mm thick side rails reinforced to prevent perimeter sag when users sit on the bed edge. Support is delivered by dark powder-coated carbon steel legs with a 30mm square cross-section, with a recommended six center support legs for stable weight distribution. All upholstered surfaces are padded with 25mm thick, 35kg/m³ density high-density polyurethane foam, beneath 0.8mm thick deep blue tufted velvet. The fixed slat platform removes the need for a separate box spring, supporting a 450kg static load across its structure, with a reference bed static load rating of 400kg. The frame is tested to withstand 10,000 cyclic load cycles, with upholstery seams rated for 180N tensile strength. The 80mm floor clearance allows unobstructed access for standard robot vacuums, and the bed is compatible with all queen size memory foam, hybrid, latex, and innerspring mattresses up to 300mm thick, designed to comfortably accommodate two users. This unbranded bed is suited for master bedrooms, guest rooms, short-term rental properties, and boutique guest spaces with contemporary or mid-century modern decor, pairing seamlessly with light wood, neutral, or warm-toned bedroom furniture. It requires a minimum bedroom footprint of 3000 x 3600 mm for adequate clearance around the frame. For procurement, note the product ships as a single set split across cartons with a total packaged gross weight of 130kg and total packaging volume of 0.9 cubic meters, with an 40 minute assembly time due to its knock-down bolted construction, which connects legs and frame segments via included hardware. The 78kg net weight unit measures 1630 x 2130 x 1100 mm when fully assembled.