纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	9.5 kg
Recommended user weight capacity	140 kg
Seat loading area	0.29 m2
Number of occupants	1
Frame static proof-load target	280 kg
Foam compression set target	8 percent after 22 hours at 70 degrees C
Upholstery abrasion target	30,000 Martindale cycles
Floor load concentration	35 kg per leg
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Structural shell and legs	Walnut-veneered bent plywood, 18 mm nominal thickness, forming continuous side, seat-support and leg profiles
Seat and back padding	White upholstered cushion pads, 60 mm nominal thickness, attached within the plywood shell
Face upholstery	White woven textile or leather-look upholstery with sewn edge piping
Cushion substrate	Molded plywood or engineered-composite support board bonded to the main bent shell
Edge treatment	Exposed walnut veneer edge with clear protective finish and contrasting white pad trim
Floor contacts	Hard glide surfaces integrated into tapered plywood leg ends

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Reclined lounge posture	Fixed 12-degree seat pitch and 18-degree back recline provide relaxed seating without user adjustment
Integrated side support	The raised left shell wing wraps around the cushion to provide lateral torso and arm support
Fixed structural stance	Four tapered shell-integrated legs transfer load directly to the floor with no swivel, folding, or rocking mechanism
Cushion retention	Seat and back pads are captured between bent plywood flanges for fixed alignment and simplified upholstery replacement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Assembly time	15 minutes
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Lounge and reception settings	Suitable for designer lounges, hotel lobbies, executive waiting zones and showrooms where sculptural seating is visually prominent
Residential living spaces	Suited to living rooms, reading corners and bedroom lounge areas with hard or polished floors using protective glides

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Seating strength and durability	EN 16139 non-domestic seating strength and durability test method
Stability	EN 1022 fixed seating stability test method
Upholstered furniture burning	EN 1021cigarette ignition test for upholstery combinations
Formaldehyde panels	EN 13986 wood-based panel formaldehyde classification

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.4

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Furniture mechanical safety	GB/T 10357.2 through GB/T 10357.3 strength and stability test methods
Formaldehyde emission	GB 18580 indoor decorative wood-based panel requirement
Upholstered furniture behavior	GB 17927 anti-ignition assessment for upholstered soft furniture

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Furniture mechanical safety：GB/T 10357.2 through GB/T 10357.3 strength and stability test methods；
2. Formaldehyde emission：GB 18580 indoor decorative wood-based panel requirement；
3. Upholstered furniture behavior：GB 17927 anti-ignition assessment for upholstered soft furniture；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · LCH-SCULPT-760-WAL-WHT

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · LCH-SCULPT-760-WAL-WHT

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · LCH-SCULPT-760-WAL-WHT打开导出工具

页面快速操作

发布采购询价

产品描述

The Sculptural Walnut Plywood Lounge Chair with White Upholstered Pads is a modern lounge seating piece defined by a continuous bent walnut plywood form and contrasting white cushioning. Its shell integrates the side profile, seat support, and tapered legs into one sculptural stance, while exposed walnut edges create a clear visual boundary around the upholstered pads. The raised left shell wing wraps around the cushion to provide integrated lateral torso and arm support, giving the chair an asymmetric, design-forward silhouette suitable for prominent placement. Construction centers on walnut-veneered bent plywood with a nominal 18 mm thickness, shaped into the structural shell and leg profiles. White seat and back pads sit within the plywood form, with cushion support provided by molded plywood or an engineered-composite board bonded to the main shell. The face upholstery is offered in white woven textile or a leather-look finish, finished with sewn edge piping. Exposed walnut veneer edges receive a clear protective finish, and hard glide surfaces are integrated into the tapered leg ends. The pads are captured between bent plywood flanges, maintaining fixed alignment while simplifying upholstery replacement. Designed for a relaxed lounge posture, the chair uses a fixed 12-degree seat pitch and 18-degree back recline, requiring no user adjustment. The finished seat cushion is 90 mm thick, the backrest padding is 70 mm thick, and the lumbar support zone is 240 mm high. A 540 mm clear width between armrests and a single-occupant layout make it suited to individual seating. The fixed structure does not swivel, fold, or rock. It has a net weight of 9.5 kg and a recommended user weight capacity of 140 kg. Product targets include a 280 kg frame static proof load, 8 percent foam compression set after 22 hours at 70 degrees C, and 30,000 Martindale abrasion cycles for the upholstery. The chair is well suited to designer lounges, hotel lobbies, executive waiting zones, and showrooms where the seating form contributes to the interior composition. It also works in residential living rooms, reading corners, and bedroom lounge areas, particularly on hard or polished floors where the integrated protective glides help preserve floor surfaces. Procurement planning should note the unbranded model LCH-SCULPT-760-WAL-WHT is supplied as one set across two cartons, with a packaged gross weight of 23 kg and carton volume of 0.26 cubic meters per set. Reference assembly time is listed as 40 minutes per set, while the product assembly-time field notes 15 minutes. Buyers should review finish, upholstery type, cushion replacement access, delivery packaging, and floor-contact requirements before specifying the chair for commercial or residential projects.

Sculptural Walnut Plywood Lounge Chair with White Upholstered Pads Specifications

供应商与现货