This unbranded counter bar stool, model BS-OAK-OLV-750, carries a refined Nordic minimalist silhouette defined by soft curved lines and a balanced, open profile. The form centers on a gracefully arched bentwood backrest paired with a squared upholstered seat, supported by four solid oak legs with subtly splayed rear positioning that broadens the floor contact area for a grounded, unobtrusive visual presence. The warm natural oak frame is finished with a clear matte lacquer that highlights the wood’s inherent grain, creating a gentle contrast against the muted olive green woven fabric of the seat. Constructed for consistent long-term use, the frame and legs are milled from solid natural oak hardwood, with rear legs cut to a 40 by 35 mm cross-section and front legs to a 35 by 35 mm cross-section, connected via traditional mortise and tenon joinery to solid oak perimeter footrest stretchers. The backrest is formed from heat-bent layered solid oak veneer with smoothly rounded edges, while the 65 mm thick seat holds high-resilience 45 kg/m³ polyurethane foam wrapped in soft polyester batting, upholstered in stain-resistant woven polyester fabric tested to withstand 30000 rub cycles, with seams stitched at 8 stitches per 30mm for reinforced durability. Non-marking plastic glides fitted to each leg base prevent floor scuffing, and the integrated footrest sits 240 mm from the floor for comfortable resting support. Designed as fixed, non-swivel, non-adjustable elevated seating, the stool delivers a 750 mm seat height aligned to standard counter and bar surfaces. The open curved bentwood back provides targeted mid-back lumbar support, while dual perimeter wood stretchers offer accessible foot placement from any seated angle. The splayed rear leg configuration reduces risk of forward or side tipping, and the high-resilience foam delivers a 60% rebound rate for sustained seating comfort, with a rated static weight capacity of 159 kg. The frame passes static load testing under 113 kg of continuous load over 24 hours, supporting reliable performance for regular use. This stool is well suited for residential kitchen islands, where it fits counter height for casual dining and meal prep seating in home kitchens, as well as commercial cafe and bar counters, where its durable solid wood frame and heavy-duty fabric stand up to high-traffic hospitality environments. For procurement, note each unit ships across two cartons with a total packaged gross weight of 23 kg, requires 40 minutes of assembly per set, and features a 450 by 450 mm seat surface paired with a 220 mm tall backrest to suit a wide range of users.