The Curved Upholstered Lounge Armchair with Tapered Legs, model LC-CURV-780 from YOUZHUO, features a sleek armless wrap-around silhouette defined by smooth, flowing lines that balance visual softness and structural precision. Its dual-material upholstery creates subtle textural contrast, with a matte woven polyester fabric covering the seat and inner back, paired with smooth dark faux leather on the outer back and side shell. The piece rests on four tapered, stained solid beech wood legs finished with dark matte lacquer, forming a stable fixed base that complements the chair’s organic curved form without visual clutter. Built for long-term durability, the chair’s internal support frame is constructed from solid kiln-dried hardwood with 25mm section thickness, supplemented by imported ash solid wood structural components. The seat cushion uses a high-resilience polyurethane core wrapped in 20mm polyester fiber, with 90mm finished thickness and 40 kg/m³ foam density, while the 70mm thick backrest uses medium-density 30 kg/m³ polyurethane foam lined with fiber batting. A dedicated 240mm high lumbar support zone aligns with the natural curve of the lower spine, and integrated curved side bolsters provide stable arm support without protruding armrests, delivering 540mm of clear seating width. The upholstery fabric delivers 50000 Martindale cycles of abrasion resistance, and the chair supports a 150kg recommended user weight, with a 200kg static load test rating per seat. Foam components offer a 45% rebound rate for consistent comfort across extended use. Nylon glides fitted to the underside of each leg protect hard flooring surfaces from scuffs and scratches. This fixed-position chair does not offer recline adjustment, ideal for settings that prioritize structured, relaxed seating. It suits upscale hotel lounge and lobby areas, where it pairs seamlessly with side tables for guest waiting and casual relaxation, and works equally well as a standalone accent seat in modern residential living rooms or quiet reading nooks. For procurement, note that legs require simple attachment to pre-installed seat frame inserts, with a 40-minute per set assembly time. Each set ships in 2 cartons with a 23kg packaged gross weight and 0.26 m³ total volume, supporting 135 sets per 20GP container at 85% space utilization to streamline bulk ordering and delivery planning. The chair’s 22kg net weight balances sturdiness and ease of repositioning for facility and residential users alike.