商品供应商Glossy White Egg-Shaped Lounge Chair with Red Cushion，Glossy white molded fiberglass-reinforced composite or ABS polymer, formed as one continuous egg-shaped enclosure
可联系供应商获取生产周期与报价。
PRODUCT MODULE 01 / 06
基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源：工厂资料结构化字段，最终以实测值为准
| Finished Seat Cushion Thickness | 90 mm | |
|---|---|---|
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源：产品性能数据，采购前请核对具体测试口径
| Product net weight | 32 kg | |
|---|---|---|
| Rated user weight | 140 kg | |
| Seating capacity | 1 adult | |
| Shell static load target | 220 kg | |
| Cushion foam density | 35 kg/m3 | |
| Cushion compression set target | 8 percent after 22 hours at 70 degrees C | |
| Fabric abrasion target | 50,000 Martindale cycles | |
| Swivel mechanism cycle target | 100,000 rotations | |
| Warranty target | 36 months | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
PRODUCT MODULE 03 / 06
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源：以工厂材质清单与验货报告为准
| Outer shell | Glossy white molded fiberglass-reinforced composite or ABS polymer, formed as one continuous egg-shaped enclosure | |
|---|---|---|
| Inner cushions | Red woven fabric over 90 mm polyurethane foam pads following the seat and back curves | |
| Internal support | Welded steel tube or plywood carrier anchored inside the shell with M8 fixing points | |
| Base assembly | Concealed circular steel swivel plate or fixed reinforced bottom ring with a protective floor glide | |
| Shell finish | High-gloss white painted or gel-coated surface with polished rounded edges | |
| Upholstery construction | Tailored red fabric panels with sewn perimeter seams attached over removable or fixed foam inserts |
PRODUCT MODULE 04 / 06
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源：功能配置参数，以供应商正式规格为准
| Enclosed lounge posture | Fixed high-back bucket seat supports an upright-relaxed posture at 105 degrees with side walls wrapping the shoulders and hips. | |
|---|---|---|
| Integrated arm support | The raised molded shell edges serve as 540 mm-high armrests without separate pads or arm adjustments. | |
| Rotational use | 360-degree swivel seating should be specified when fitted with the concealed circular bearing; verify the exact base before order. | |
| Cushion service access | Red seat and back inserts should be removable with hook-and-loop or clip fixation to permit fabric replacement and shell cleaning. |
PRODUCT MODULE 05 / 06
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源：外贸报价与装柜测算参考
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源：依据产品结构与品类整理的推荐应用场景
| Commercial lounge setting | Suitable for hotel lobbies, executive breakout zones, galleries, and beauty salons where a sculptural single-seat accent chair is needed. | |
|---|---|---|
| Private relaxation setting | Suited to a reading corner or modern living room because the high enclosed shell provides shoulder privacy and relaxed lounge support. |
STANDARD S1
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
| EN 16139 seating strength and durability | Applicable non-domestic lounge seating standard for strength, durability, and safety acceptance testing. | |
|---|---|---|
| EN 1022 seating stability | Applicable to verification that the rounded high-back chair does not tip forward, rearward, or sideways. | |
| EN 14465 upholstery fabric abrasion | Applicable textile test basis for Martindale abrasion, pilling, and seam slippage procurement checks. | |
| EN 12521 furniture safety | Applicable general furniture safety reference for edges, stability, and shear hazards in non-domestic interiors. |
STANDARD S2
北美市场采购验货参考 * ANSI/BIFMA 标准
美国及加拿大家具标准
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
STANDARD S3
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
| GB/T 10357.2 furniture mechanical test | Applies to seating backrest strength and fatigue test planning for domestic and commercial furniture acceptance. | |
|---|---|---|
| GB/T 10357.3 furniture mechanical test | Applies to seat front-edge static load and fatigue evaluation of the molded lounge chair. | |
| GB 28007 furniture safety | Applies to children's furniture only if a child-use version is marketed; standard adult lounge use should not claim it. |
招标文件标准化描述文本
本产品须满足以下技术参数要求： 1. GB/T 10357.2 furniture mechanical test：Applies to seating backrest strength and fatigue test planning for domestic and commercial furniture acceptance.； 2. GB/T 10357.3 furniture mechanical test：Applies to seat front-edge static load and fatigue evaluation of the molded lounge chair.； 3. GB 28007 furniture safety：Applies to children's furniture only if a child-use version is marketed; standard adult lounge use should not claim it.； 最终交付参数、检测报告和验收标准以双方采购合同为准。
GENERATED EXPORTS
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告，可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块，文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具