商品供应商Two-Person Workstation Desk with Divider Screen and Rear Storage Hutch，25 mm wood-based panel with walnut wood-grain melamine face and matching impact-resistant edge banding
可联系供应商获取生产周期与报价。
PRODUCT MODULE 01 / 06
基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源：工厂资料结构化字段，最终以实测值为准
| Overall dimensions | 2400 x 1400 x 1200 mm | |
|---|---|---|
| Finished Top Thickness | 50 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源：产品性能数据，采购前请核对具体测试口径
| Net weight | 95 kg | |
|---|---|---|
| Distributed worktop load | 80 kg | |
| Per-user point load | 40 kg | |
| Hutch shelf load | 15 kg per shelf | |
| Recommended users | 2 users | |
| Static stability margin | 15 kg horizontal force at 1100 mm | |
| Drawer or door cycle target | 50,000 cycles | |
| Warranty target | 5 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
PRODUCT MODULE 03 / 06
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源：以工厂材质清单与验货报告为准
| Work surface | 25 mm wood-based panel with walnut wood-grain melamine face and matching impact-resistant edge banding | |
|---|---|---|
| Storage panels | 18 mm charcoal and walnut-look melamine-faced particleboard or MDF panels | |
| Support legs | Black powder-coated steel splayed legs, 40 mm visible section, with floor-contact glides | |
| Divider screen | Blue upholstered tackable panel over a rigid board core, fitted with two silver metal desk clamps | |
| Hutch and cabinet hardware | Steel hinges, handles or access fittings with silver or dark powder-coated finish; two rectangular front plates are visible | |
| Cable management fittings | Two blue rectangular desk grommets and a rear cabinet routing zone visible behind the work surface |
PRODUCT MODULE 04 / 06
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源：功能配置参数，以供应商正式规格为准
| Two-person work layout | Two 1200 mm work zones share one continuous front top, with the low divider providing visual separation without blocking conversation | |
|---|---|---|
| Privacy screen mounting | The 1200 x 320 mm upholstered screen is clamp-mounted through or onto the worktop by two metal supports, allowing removal without a permanent panel joint | |
| Cable routing | Two blue grommets pass monitor and power cables from the work surface toward the rear cabinet, which provides a vertical chase into the lower storage body | |
| Integrated storage support | The right floor-standing cabinet supports the return top and combines two upper open hutch bays with a lower enclosed storage or CPU zone |
PRODUCT MODULE 05 / 06
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源：外贸报价与装柜测算参考
| Main carton dimensions | 2450 x 760 x 120 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | Main top 2500× 1050× 350 mm; return/pedestal packed separately | |
| Reference Packaged Gross Weight | 180 kg/set in 4 cartons | |
| Reference Packaging Volume | 1 m³/set |
PRODUCT MODULE 06 / 06
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源：依据产品结构与品类整理的推荐应用场景
| Open-plan office | Suits two adjacent staff in open-plan areas because the low screen gives visual separation while preserving supervisor sightlines and team communication | |
|---|---|---|
| Project or administrative team zone | Fits documentation, dual monitors and shared storage where users need an integrated hutch and cable routing rather than a simple writing table |
STANDARD S1
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
| EN 527-1:2011 | Office worktables safety, strength and durability requirements, applicable to the seated workstation top and support structure | |
|---|---|---|
| EN 527-2:2002+A1:2019 | Office worktables dimensional safety requirements, useful for verifying 750 mm work height and clear knee space | |
| EN 16139:2013+A1:2024 | Strength, durability and safety requirements for non-domestic seating-related support furniture where used in linked bench systems | |
| EN 13986:2004+A1:2015 | Wood-based panels for construction use, suitable as a panel-performance reference when supplier declares the substrate | |
| EN 1022:2018 | Seating stability is not directly applicable to the desk, but may be referenced when testing the complete workstation with attached screens |
STANDARD S2
北美市场采购验货参考 * ANSI/BIFMA 标准
美国及加拿大家具标准
| ANSI/BIFMA X5.5-2021 | Desk products standard, suitable for vertical load, horizontal stability, leg strength and cyclic fatigue acceptance | |
|---|---|---|
| ANSI/BIFMA X5.9-2019 | Storage units standard, applicable to the integrated cabinet and hutch shelf load and stability | |
| ANSI/BIFMA e3-2019 | Furniture sustainability standard, usable only if the supplier declares panel emissions, materials and facility scores | |
| ANSI/BIFMA G1-2013 | Ergonomics guideline, useful for confirming the seated work height and clearance against intended task-chair dimensions |
STANDARD S3
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to panel dimensions, edge sealing, finish and structural stability inspection | |
|---|---|---|
| GB/T 3325-2017 | Metal furniture general technical requirements, applicable to steel leg coating, welding or joint quality and load testing | |
| GB 18580-2017 | Formaldehyde emission limit for wood-based panels, suitable as a panel procurement and incoming-inspection requirement | |
| GB/T 10357.5-2011 | Furniture mechanical surface test for strength, appropriate for desk-top static load and cabinet support verification |
招标文件标准化描述文本
本产品须满足以下技术参数要求： 1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to panel dimensions, edge sealing, finish and structural stability inspection； 2. GB/T 3325-2017：Metal furniture general technical requirements, applicable to steel leg coating, welding or joint quality and load testing； 3. GB 18580-2017：Formaldehyde emission limit for wood-based panels, suitable as a panel procurement and incoming-inspection requirement； 4. GB/T 10357.5-2011：Furniture mechanical surface test for strength, appropriate for desk-top static load and cabinet support verification； 最终交付参数、检测报告和验收标准以双方采购合同为准。
GENERATED EXPORTS
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告，可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块，文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具