基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源:工厂资料结构化字段,最终以实测值为准
| 产品外部尺寸(宽 × 深 × 高) | 2800 × 1400 × 1100 mm | |
|---|---|---|
| Finished Top Thickness | 50 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源:产品性能数据,采购前请核对具体测试口径
| Distributed work surface load | 120 kg total | |
|---|---|---|
| Per-person work surface load | 30 kg | |
| Single drawer static load | 15 kg | |
| Pedestal top load | 25 kg | |
| Occupant capacity | 4 users | |
| Leveling adjustment | 15 mm | |
| Net weight | 185 kg | |
| Drawer slide cycle acceptance target | 50,000 cycles | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源:以工厂材质清单与验货报告为准
| Work surface | 25 mm melamine-faced particleboard with oak grain décor and sealed PVC edge banding | |
|---|---|---|
| Storage pedestals | 18 mm melamine-faced board in oak and light grey laminate with black recessed locks | |
| Central panels | 18 mm grey powder-coated steel or steel-composite modesty panels with rounded bottom corners | |
| Divider screen | Acrylic-faced or laminated composite privacy panel with a silver painted metal support rail | |
| Support framework | Rectangular steel center rail and screen posts with light grey powder coating | |
| Hardware | Keyed cylinder locks, drawer pulls, adjustable nylon-base glides and metal connector brackets |
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源:功能配置参数,以供应商正式规格为准
| Seating layout | Four users work face-to-face in two pairs, with each 1400 mm position served by one outer pedestal | |
|---|---|---|
| Privacy division | Low 350 mm divider screens separate opposite users without blocking office sightlines above seated head height. | |
| Personal storage | Each outer position includes a top lockable drawer and a lower lockable storage face for personal documents. | |
| Cable management | A rear center rail, monitor shelf and desktop grommet route monitor and power cables away from the writing area. |
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源:外贸报价与装柜测算参考
| Largest carton dimensions | 1450 x 760 x 180 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | Main top 2500× 1050× 350 mm; return/pedestal packed separately | |
| Reference Packaged Gross Weight | 180 kg/set in 4 cartons | |
| Reference Packaging Volume | 1 m³/set |
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源:依据产品结构与品类整理的推荐应用场景
| Open-plan office | Suitable for four-person team neighborhoods where low screens provide visual privacy while retaining collaboration access. | |
|---|---|---|
| Administrative or processing workspace | Lockable pedestals and 1400 mm-wide positions suit paperwork, dual displays and daily personal office storage. |
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
| EN 527-1:2011+A1:2016 | Office desk safety, strength and durability requirements applicable to commercial work surfaces. | |
|---|---|---|
| EN 527-2:2002+A1:2003 | Mechanical safety, dimensional and structural requirements for office desks. | |
| EN 15372:2016 | Durability, strength and stability requirements applicable to office storage furniture. | |
| EN 1725:1998 | Safety, strength and stability requirements for storage pedestals used with office desks. |
北美市场采购验货参考 * ANSI/BIFMA 标准
美国及加拿大家具标准
| ANSI/BIFMA X5.5-2021 | Desk products test covering structural load, cycle and stability verification for commercial desks. | |
|---|---|---|
| ANSI/BIFMA X5.9-2019 (R2024) | Storage units performance standard relevant to lockable office pedestals and drawer slides. |
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
| GB/T 3324-2017 | General technical requirements applicable to wooden furniture dimensions, workmanship and structural stability. | |
|---|---|---|
| GB/T 3325-2017 | Metal furniture general technical requirements relevant to coated steel supports and panel frames. | |
| GB/T 10357.1-2013 | Desk strength and load test method recommended for tabletop static-load verification. | |
| GB/T 10357.5-2013 | Drawer and sliding component durability method recommended for pedestal slide acceptance. | |
| GB 18580-2017 | Formaldehyde emission limit for wood-based panels used in the desk and cabinet components. | |
| GB/T 10357.7-2013 | Furniture stability test method applicable to the floor-standing bench assembly. |
本产品须满足以下技术参数要求: 1. GB/T 3324-2017:General technical requirements applicable to wooden furniture dimensions, workmanship and structural stability.; 2. GB/T 3325-2017:Metal furniture general technical requirements relevant to coated steel supports and panel frames.; 3. GB/T 10357.1-2013:Desk strength and load test method recommended for tabletop static-load verification.; 4. GB/T 10357.5-2013:Drawer and sliding component durability method recommended for pedestal slide acceptance.; 5. GB 18580-2017:Formaldehyde emission limit for wood-based panels used in the desk and cabinet components.; 6. GB/T 10357.7-2013:Furniture stability test method applicable to the floor-standing bench assembly.; 最终交付参数、检测报告和验收标准以双方采购合同为准。
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告,可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块,文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段,可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具