| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
No parameter correction records exist. If you spot inaccurate data, click the flag icon at the end of the corresponding row to submit feedback. | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
| Overall two-seater sofa dimensions | 1750 x 780 x 820 mm | |
|---|---|---|
| Single armchair dimensions | 760 x 780 x 820 mm | |
| Coffee table dimensions | 1200 x 700 x 450 mm | |
| Seat height from floor | 420 mm | |
| Seat depth | 550 mm | |
| Seat cushion thickness | 120 mm | |
| Backrest height above seat | 400 mm | |
| Armrest height above seat | 200 mm | |
| Armrest tube outer diameter | 30 mm | |
| Coffee table glass top thickness | 12 mm | |
| Knee clearance under coffee table | 380 mm | |
| Metal frame tubing wall thickness | 1.5 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
净重 / 最大承重 / 适用人数 / 耐久性能
| Single seat static load capacity | 150 kg | |
|---|---|---|
| Total set net weight range | 165 kg | |
| PU upholstery abrasion resistance | 50000 double rubs | |
| Seat foam density | 40 kg/m³ | |
| Backrest foam density | 30 kg/m³ | |
| Suggested maximum daily user turnover | 50 persons | |
| Seam stitch pitch | 8 stitches per inch | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm | |
| Per-seat Load Reference | 130 kg/seat |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
| Seat and back upholstery | Dark grey matte polyurethane (PU) leather | |
|---|---|---|
| Seat internal frame | 1.5mm thick welded steel inner frame | |
| Armrest and support frame | Matte black powder-coated square steel tubing | |
| Seat padding | High-density polyurethane foam | |
| Backrest padding | Medium-density polyurethane foam | |
| Coffee table top | Black tempered safety glass with polished edges | |
| Coffee table frame | Black powder-coated welded steel X-brace and square base | |
| Coffee table lower shelf | Black tempered safety glass | |
| Frame foot pads | Non-slip rubber floor protectors | |
| Seat support system | 50mm wide elastic webbing, 40mm spacing | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
| Fixed cantilever seating structure | Continuous steel sled base provides slight flexible give when seated, no tilt or swivel function for formal reception posture | |
|---|---|---|
| Segmented layered back support | Two-section backrest with separate upper/lower padding targets lumbar and upper back support without manual adjustment | |
| Integrated fixed armrests | Padded armrests mounted directly to steel frame, providing stable forearm support at fixed height, no height or pivot adjustment | |
| Coffee table dual-tier storage | Upper glass surface holds beverage service and decor, lower glass shelf stores reading materials and office supplies | |
| Floor-protective glide function | Rubber pads at all frame contact points prevent scratching hard flooring and reduce sliding noise during repositioning | |
| Modular set arrangement flexibility | 1 two-seater + 2 single chairs + 1 coffee table can be arranged in square, linear or L-shaped layouts to fit different reception room dimensions | |
| Stain-resistant upholstery maintenance | PU leather surface allows wipe-clean maintenance with neutral detergent for high-traffic public use | |
| Static welded frame stability | Fully welded steel joints eliminate loose fastener rattle and provide long-term structural rigidity without regular tightening | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
经核验的外箱 / 毛重 / 组装 / 装柜数据
| Total number of shipping cartons | 4 | |
|---|---|---|
| Two-seater sofa carton dimensions | 1780 x 810 x 550 mm | |
| Single armchair carton dimensions | 790 x 810 x 550 mm | |
| Coffee table carton dimensions | 1250 x 750 x 180 mm | |
| Total set shipping gross weight | 185 kg | |
| Total set shipping volume | 1.62 CBM | |
| Required assembly time | 60 minutes | |
| 40ft HQ container load quantity | 42 sets | |
| Standard warranty period for commercial use | 3 years | |
| Reference Package Count | 1 set / 2 cartons |
推荐空间 / 目标用户 / 使用方式
| Corporate office reception areas | Formal neutral grey styling matches professional business environments, suitable for visitor waiting and short meeting interactions | |
|---|---|---|
| Executive lounge waiting zones | Padded seating and matching coffee table support beverage service and casual discussion for executive guests | |
| Bank and public service waiting rooms | Wipe-clean PU upholstery and durable steel frame withstand high daily visitor turnover in public service spaces | |
| Conference breakout rooms | Modular layout flexibility allows arrangement for small group discussion or short break use during long meetings | |
| Hotel business center waiting areas | Modern minimalist design coordinates with contemporary hotel interiors, suitable for guest short-stay seating | |
| Small office meeting spaces | Compact 3+1+1 set fits rooms from 12 to 20 sqm, providing seating for 4 people around the central table |
欧洲市场准入与化学品要求
| EN 13759:2012 Domestic and contract furniture - Seating - Test methods for strength and durability | Applies to static load, fatigue and stability testing for all seating units in the set for contract office use | |
|---|---|---|
| EN 12521:2015 Furniture - Strength, durability and safety - Requirements for domestic tables | Applies to coffee table structural strength, edge safety and load capacity requirements for contract use | |
| EN 1022:2018 Domestic furniture - Seating - Determination of stability | Applies to anti-tip stability testing for all seating units when loaded at edge positions |
美国及加拿大办公家具标准
| ANSI/BIFMA X5.4-2020 Lounge and Public Seating | Applies to commercial public seating load, durability and stability requirements for office reception use | |
|---|---|---|
| ANSI/BIFMA X5.5-2021 Desk Products | Applies to the matching coffee table structural performance, edge safety and load requirements as occasional work/surface | |
| ANSI/BIFMA e3-2019 Furniture Sustainability Standard | Provides reference for material content, low-emission and recyclability requirements for sustainable office procurement |
适用于中国市场项目的标准
| GB/T 3324-2017 General technical requirements for wooden furniture | Applies to structural safety, dimensional tolerance and surface finish requirements for furniture of this category, for acceptance reference | |
|---|---|---|
| GB/T 16799-2008 Polyurethane leather for furniture | Applies to upholstery material tensile strength, abrasion resistance and peel strength requirements for upholstered seating | |
| GB/T 3325-2017 Metal furniture general technical requirements | Applies to steel frame welding quality, powder coating adhesion, stability and load requirements for metal-framed seating and tables | |
| GB/T 28007-2011 Furniture for children and general upholstered furniture for public places | Applies to fire resistance and structural safety requirements for public area reception seating |
本产品须满足以下技术参数要求： 1. GB/T 3324-2017 General technical requirements for wooden furniture：Applies to structural safety, dimensional tolerance and surface finish requirements for furniture of this category, for acceptance reference； 2. GB/T 16799-2008 Polyurethane leather for furniture：Applies to upholstery material tensile strength, abrasion resistance and peel strength requirements for upholstered seating； 3. GB/T 3325-2017 Metal furniture general technical requirements：Applies to steel frame welding quality, powder coating adhesion, stability and load requirements for metal-framed seating and tables； 4. GB/T 28007-2011 Furniture for children and general upholstered furniture for public places：Applies to fire resistance and structural safety requirements for public area reception seating； 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告，可选择公制或英制单位。
导出全部商品信息与参数模块，文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具The JINSLEI OF-RCP-SF001 is a coordinated 3+1+1 modern office reception sofa set pred with a matching glass-top coffee table, designed for polished, professional public and semi-public spaces. Finished in dark grey matte PU leather with matte black powder-coated square steel framing, the set carries a streamlined, minimalist visual profile defined by clean geometric lines, cantilevered sled bases, and rounded, generously padded cushion edges. The configuration includes one two-seater sofa, two single armchrs, and a central dual-tier coffee table, with flexible layout options that support square, linear, or L-shaped arrangements to adapt to varied room footprints. All seating units are built on fully welded commercial-grade steel inner frames, supported by elastic webbing under the cushions for even weight distribution. Seat cushions use high-density resilient polyurethane foam, pred with medium-density foam backrests shaped into two segmented layers to deliver targeted lumbar and upper back support without manual adjustment. Fixed, padded armrests are mounted directly to the steel frame at an ergonomic height for forearm resting, while non-slip rubber glides at all frame contact points protect hard flooring and reduce repositioning noise. The matching coffee table features a thick black tempered safety glass top with polished edges, a matching black powder-coated steel X-brace support structure, and a lower tempered glass shelf for additional open storage. The PU leather upholstery offers wipe-clean stn resistance, supported by reinforced stitching to hold up to frequent public use. This set is well suited for corporate office reception areas, executive lounge wting zones, bank and public service wting rooms, conference breakout spaces, hotel business center wting areas, and small to medium enclosed office meeting rooms. It accommodates upright, formal seating posture ideal for short visitor wts, casual guest discussions, and meeting break use. For procurement planning, note that the set ships in knock-down packaging across four separate cartons, with an two-person assembly time of 60 minutes. The product comes with a 3-year commercial warranty covering frame welds and structural defects, excluding regular upholstery wear and user-inflicted damage. Buyers should confirm exact material specifications agnst the supplier bill of materials prior to final order placement, as select dimension and material detls reference standard commercial furniture benchmarks for the category. The set is engineered to support medium to high dly visitor turnover, making it a practical choice for high-traffic commercial environments.
关注我们