This unbranded three-seater fabric sofa, model 3S-CORAL-SQARM-MTL-2350, features a sleek modern minimalist silhouette defined by clean straight lines, square track arms, and angled matte black metal legs that lift the frame 150 mm above the floor. Its coral pink linen-look woven polyester upholstery carries a soft matte finish, paired with a continuous fixed three-position bench seat marked by a central alignment seam, and three matching square throw pillows positioned to support the lower back. The overall dimensions measure 2350 x 890 x 840 mm, with a 1950 mm seat width, 640 mm seat depth, 470 mm seat height, 200 mm wide armrests sitting 570 mm above the floor, and a 370 mm tall backrest measured from the seat surface, creating a balanced, unobtrusive visual profile suited to a wide range of interior schemes. The sofa is built on an 18 mm thick multilayer engineered plywood frame secured with glued and screwed joints, supported by six 1.2 mm thick matte black powder-coated steel angled legs (three positioned at the front, three at the rear) fitted with removable rubber glides to prevent hard floor scratching. Seat support comes from 3.8 mm diameter sinuous steel springs spaced 100 mm apart, topped with seat cushions filled with 35 kg/m³ high-density polyurethane foam wrapped in 200 g polyester fiber batting, delivering a 60% rebound rate. The backrest uses 25 kg/m³ polyurethane foam blended with PP cotton fiber, while the included throw pillows are filled with hollow conjugated PP fiber. The upholstery delivers 30000 Martindale cycles of abrasion resistance, with 3 mm seam stitch pitch, a non-woven polypropylene dust cover under the seat base, and zinc-plated steel bolts and barrel nuts for knockdown assembly. The unit carries a 400 kg total static load capacity, with frame durability tested to 25000 static load cycles, and a net weight of 70 kg. It has no recline, sleeper conversion, or adjustable mechanisms, and requires only spot cleaning with a soft damp cloth and mild upholstery cleaner for regular maintenance. This stationary sofa is well suited as primary three-person seating for residential living rooms and studio apartment lounges, where its compact profile fits standard room layouts without overwhelming limited floor space. It also works effectively as light commercial seating for office reception lobbies, visitor waiting areas, informal office breakout collaboration spaces, high-traffic co-working common areas, and short- or long-term rental property staging. For procurement, note that the product ships in two cartons per set, with a packaged gross weight of 110 kg, total packaging volume of 1.8 m³, and a reference assembly time of 40 minutes using the included hex key hardware, with legs attaching directly to pre-installed frame mounting plates. No additional specialized tools are required for setup.