| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
No parameter correction records exist. If you spot inaccurate data, click the flag icon at the end of the corresponding row to submit feedback. | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
| Overall set dimensions (2 armchairs + 1 side table) | 2800 x 900 x 900 mm | |
|---|---|---|
| Single armchair overall dimensions | 1050 x 900 x 900 mm | |
| Side table overall dimensions | 700 x 700 x 550 mm | |
| Seat height (top of cushion to floor) | 450 mm | |
| Seat cushion usable dimensions | 700 x 600 x 150 mm | |
| Backrest total height (seat cushion to top of back) | 450 mm | |
| Armrest top height (floor to arm surface) | 600 mm | |
| Armrest top surface dimensions | 120 x 650 mm | |
| Clearance under seat (floor to bottom of seat rail) | 120 mm | |
| Side table apron clearance (floor to bottom of table apron) | 480 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
净重 / 最大承重 / 适用人数 / 耐久性能
| Single armchair net weight | 75 kg | |
|---|---|---|
| Single armchair static load capacity | 160 kg | |
| Seat cushion foam density | 45 kg/m³ | |
| Seat cushion indentation load deflection | 35 kg/314cm² | |
| Recommended maximum continuous seating duration | 120 minutes | |
| Suggested occupant capacity per armchair | 1 | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles | |
| Five-star Base Static Load Reference | Acceptance target ≥120 kg; chair reference load 150 kg |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
| Seat, back and arm inner upholstery | Beige 1.2mm thick semi-aniline finished leather | |
|---|---|---|
| Seat cushion core padding | High-density polyurethane foam | |
| Back cushion padding | Medium-density polyurethane foam | |
| Structural frame | Kiln-dried solid hardwood with dark walnut wood veneer finish | |
| Decorative trim hardware | Gold-toned zinc alloy cast inlays | |
| Armrest top surfaces | 25mm thick polished wood veneer panel with high-gloss scratch-resistant clear lacquer | |
| Side table top | 25mm thick high-density fiberboard with walnut veneer and clear lacquer finish | |
| Chair base plinth | 80mm tall solid wood frame with non-marking rubber foot pads | |
| Side table frame and legs | 40mm thick solid hardwood with dark walnut veneer | |
| Upholstery seam construction | Nylon-bonded thread with 8mm stitch pitch | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
| Fixed-position seating design | Non-reclining, non-swivel fixed construction | |
|---|---|---|
| Stain-resistant upholstery surface | Sealed leather finish allows wiping of liquid spills with a damp cloth | |
| Integrated armrest surface function | Wide solid wood arm tops support placement of cups, notepads or mobile devices directly next to the occupant | |
| Matching side table coordination | Table height aligned perfectly with chair arm height to create a continuous flat surface for shared items | |
| Scratch-resistant wood finish | High-gloss lacquer on all wood components resists scuffs from shoes, bags and placed objects | |
| Leveling foot adjustment | Concealed adjustable feet on the bottom of chair plinths compensate for uneven stone or tile flooring | |
| Removable seat cushion access | Seat cushions are secured with hidden hook-and-loop fasteners to allow access to the frame for cleaning or repair | |
| Integrated armrest storage surface | Wide solid wood arm tops support 5kg of placed items such as cups, notepads or mobile devices directly next to the occupant | |
| Matched side table coordination | Table height aligned to within 2mm of chair arm height to create a continuous flat surface for shared items | |
| Recline Angle / Lock Reference | 125° with 3 suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel |
经核验的外箱 / 毛重 / 组装 / 装柜数据
| Number of shipping cartons per set (2 chairs + 1 table) | 6 | |
|---|---|---|
| Single chair shipping carton dimensions | 1150 x 1000 x 980 mm | |
| Side table top carton dimensions | 780 x 780 x 120 mm | |
| Side table base carton dimensions | 680 x 680 x 480 mm | |
| Total gross weight per complete set | 210 kg | |
| Total shipping volume per complete set | 2.7 CBM | |
| On-site assembly time per set | 30 minutes | |
| 40HQ container loading quantity | 42 sets | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
推荐空间 / 目标用户 / 使用方式
| Corporate executive VIP reception lobbies | Formal traditional styling matches luxury stone and wood interior finishes, appropriate for receiving visiting guests and dignitaries in headquarters buildings | |
|---|---|---|
| Government and institutional meeting waiting areas | Conservative beige and dark wood color scheme conveys a formal, professional atmosphere suitable for public sector reception spaces | |
| High-end hotel private meeting lounge areas | Durable commercial-grade construction supports constant daily guest use while maintaining a polished premium appearance | |
| Boardroom auxiliary seating | Can be placed adjacent to conference tables or along boardroom walls for additional guest seating during formal meetings | |
| Senior executive office guest seating | Formal design complements dark wood executive desks, providing comfortable structured seating for visitors in private executive offices | |
| Pairing configuration recommendation | Arrange as two single chairs flanking one side table for face-to-face conversation, or combine additional chairs and tables for larger linear reception seating layouts | |
| Recommended configuration | Arrange as two single chairs flanking one side table for face-to-face conversation, or combine additional chair-table units for linear extended reception seating layouts | |
| Recommended Matching Desk Size | 2.4 m executive desk |
欧洲市场准入与化学品要求
| EN 16139:2013 Furniture - Strength, durability and safety - Requirements for non-domestic seating | Applies to commercial reception seating, specifies static load, fatigue and stability testing criteria for public area chairs | |
|---|---|---|
| EN 13722:2004 Furniture - Tables - Strength and durability requirements for non-domestic tables | Applies to the matching side table, sets load and durability criteria for commercial occasional tables | |
| EN 1021-1:2019 Upholstered furniture - Assessment of ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette | Specifies basic flame resistance performance required for upholstered furniture in public building reception areas |
美国及加拿大办公家具标准
适用于中国市场项目的标准
| GB/T 3324-2017 General technical requirements for wooden furniture | Applies to solid wood and veneer frame components, sets requirements for structural stability, finish adhesion and formaldehyde emission limits for wood-based materials | |
|---|---|---|
| GB 20400-2006 Leather and fur - Limit of harmful matter | Applies to leather upholstery components, sets limits for prohibited azo dyes, formaldehyde and pH value for upholstered furniture leather | |
| GB/T 27717-2011 General technical requirements for upholstered furniture for public places | Applies to public reception use, sets requirements for flame resistance, structural durability and load capacity for high-traffic commercial seating | |
| GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture | Applies to all wood-based panel components, sets mandatory formaldehyde emission limits for indoor use furniture |
本产品须满足以下技术参数要求： 1. GB/T 3324-2017 General technical requirements for wooden furniture：Applies to solid wood and veneer frame components, sets requirements for structural stability, finish adhesion and formaldehyde emission limits for wood-based materials； 2. GB 20400-2006 Leather and fur - Limit of harmful matter：Applies to leather upholstery components, sets limits for prohibited azo dyes, formaldehyde and pH value for upholstered furniture leather； 3. GB/T 27717-2011 General technical requirements for upholstered furniture for public places：Applies to public reception use, sets requirements for flame resistance, structural durability and load capacity for high-traffic commercial seating； 4. GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture：Applies to all wood-based panel components, sets mandatory formaldehyde emission limits for indoor use furniture； 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告，可选择公制或英制单位。
导出全部商品信息与参数模块，文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具The HUIBANG VIP-RCP-1S-TBL-001 reception lounge seating set is a coordinated 2+1 configuration consisting of two single armchrs and one matching side table, finished in a polished beige and dark walnut palette accented with subtle gold-toned trim. The layout is designed for face-to-face conversation, with the side table positioned neatly between the two armchrs to create a cohesive formal seating arrangement; units can also be combined with additional matching pieces to form extended linear seating layouts for larger spaces. Structurally, the set uses a kiln-dried solid hardwood frame finished with dark walnut veneer, pred with high-gloss scratch-resistant lacquer on all wood surfaces to resist scuffs and liquid spills. Seat, back and inner arm surfaces are upholstered in smooth matte beige artificial leather, with reinforced nylon-bonded stitching to prevent fraying in high-traffic use. Seat cushions use layered high-density polyurethane foam for shape retention and medium-firm support, while back cushions are contoured with medium-density foam to deliver targeted lumbar support. Wide polished wood armrests sit level with the side table surface to create a continuous flat plane for placed items, and non-marking rubber foot pads with concealed adjustable levelers prevent floor damage and eliminate rocking on uneven hard flooring. The set offers fixed-position, mntenance-friendly seating with stn-resistant upholstery that wipes clean with a damp cloth, removable hook-and-loop secured seat cushions for easy cleaning access, and generous under-seat clearance to support unobstructed floor cleaning without moving furniture. The side table provides sufficient knee clearance for occasional writing or item placement during visits, with a water-sealed veneer top matched to the chr wood finish. This set is suited for formal commercial and premium residential spaces including corporate executive VIP lobbies, government and institutional wting areas, high-end hotel private meeting lounges, boardroom auxiliary seating zones, and senior executive office guest areas, where its conservative, polished aesthetic complements luxury stone and wood interior finishes. When procuring this set, note that armchrs ship fully assembled while only the side table requires simple attachment of legs to its top on site, with minimal on-site assembly required. Buyers should confirm exact material grade detls with the supplier prior to finalizing orders, and plan receiving and installation logistics to accommodate the fully assembled chr units.
关注我们