纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2100 × 840 × 860 mm
Overall set layout dimensions	2800 x 2400 x 860 mm
3-seat sofa dimensions	2100 x 840 x 860 mm
Single armchair dimensions	720 x 670 x 830 mm
Seat height for all seating units	450 mm
Seat cushion depth for all seating units	580 mm
Large nesting coffee table dimensions	610 x 610 x 460 mm
Small nesting coffee table dimensions	500 x 500 x 430 mm
Seat cushion thickness	120 mm
Back cushion thickness	100 mm
Cantilever sled base metal tube diameter	50 mm
Table top thickness	12 mm
Armrest height above seat	180 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total set net weight	220 kg
Per-seat static load capacity	181 kg
Recommended maximum occupancy	5 people
Seating foam density	45 kg/m³
Foam rebound rate	60%
Upholstery abrasion resistance	50000 cycles
Metal base static load rating	905 kg
Table surface heat resistance	200 °C
Limited commercial warranty period	3 years
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seating main upholstery	1.2mm thick matte PU leather in light taupe
Arm outer accent panels	Patterned dark grey PU leather with geometric V-shaped design
Seating inner frame	18mm thick plywood/solid hardwood frame
Cushion filling	High-density polyurethane foam with doll cotton topper
Seating base frame	2mm thick powder-coated steel cantilever sled base
Floor contact glides	Non-marking PVC pads on all base feet
Coffee table tops	12mm thick matte sintered stone in light grey finish
Coffee table bases	2mm thick powder-coated metal trapezoidal pedestal bases
Back cushion tufting	Matching PU fabric-covered buttons at each cushion center
Upholstery stitching	4 stitches per centimeter reinforced seam construction
Frame joinery hardware	Zinc-plated steel bolts and corner brackets
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating position adjustment	Fixed non-reclining, non-swivel stationary design
Coffee table nesting function	Small table slides fully under larger table to save floor space
Floor protection feature	Non-marking PVC glides prevent scratches on hard lobby flooring
Seating stability design	Cantilever sled base distributes weight evenly without rocking
Surface maintenance feature	Stain-resistant PU upholstery wipes clean with standard disinfectants
Table surface performance	Scratch and heat resistant sintered stone top resists daily use damage
Layout flexibility	Modular 3+1+1 configuration can be rearranged for different lobby sizes
Assembly requirement	Minimal on-site assembly for attaching base feet to seating units
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Corporate office lobby reception areas	Formal U-shaped conversation layout supports guest waiting and greeting
Executive floor visitor waiting zones	Neutral taupe finish matches modern professional office decor schemes
High-rise office lounge spaces	Cantilever base and clean lines suit contemporary commercial interior design
Meeting room breakout spaces	Seating plus tables supports casual discussion and light refreshment service
Public service waiting areas	Stain-resistant, durable surfaces withstand high daily visitor traffic
Recommended complementary decor	Low-profile potted plants and reading materials on tables for guest use
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-2:2018	Applicable to safety requirements for non-domestic seating used in public spaces
EN 15372:2016	Applicable to strength, durability and safety requirements for non-domestic tables

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.4-2021	Applicable to performance and safety standard for lounge and public office seating
ANSI/BIFMA X5.5-2021	Applicable to performance and safety standard for desk/occasional office tables

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	Applicable to wooden frame general furniture quality and structural safety requirements
GB 18584-2001	Applicable to interior decoration material limit of harmful substances in wood furniture
GB/T 16799-2008	Applicable to performance requirements for polyurethane leather used in furniture

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：Applicable to wooden frame general furniture quality and structural safety requirements；
2. GB 18584-2001：Applicable to interior decoration material limit of harmful substances in wood furniture；
3. GB/T 16799-2008：Applicable to performance requirements for polyurethane leather used in furniture；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OFS-RCP-311-TPE

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OFS-RCP-311-TPE

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OFS-RCP-311-TPE打开导出工具

页面快速操作

发布采购询价

产品描述

The Modern Light Taupe Commercial Office Reception Seating Set with Nesting Coffee Tables delivers a polished, professional seating solution for high-traffic public and professional spaces, delivered as a coordinated set containing one 3-seat sofa, two single armchairs, and two nesting square coffee tables. The set forms a cohesive U-shaped conversation layout when arranged in its standard 3+1+1 configuration, with a soft neutral light taupe primary upholstery accented by dark grey geometric V-patterned panels on arm exteriors and matching fabric-covered button tufting at the center of each back cushion. Clean linear silhouettes paired with open cantilever sled bases create a light, contemporary visual presence that avoids visual clutter in compact or open-plan spaces, while the two square nesting tables sit within easy reach of all seating positions to hold guest items.
Each seating piece is built around a solid hardwood and plywood inner frame, padded with high-density polyurethane foam topped with a soft doll cotton layer, and upholstered in matte 1.2mm PU leather. The seating is supported by 2mm thick powder-coated steel cantilever sled bases fitted with non-marking PVC glides at all floor contact points, which distribute weight evenly to prevent rocking and protect hard lobby flooring from scratches. The accompanying coffee tables feature 12mm thick matte light grey sintered stone tops mounted on 2mm thick powder-coated metal trapezoidal pedestal bases; the smaller table slides fully beneath the larger unit to free up floor space when not in use. The fixed, non-reclining, non-swivel seating design supports steady, stable use, with stain-resistant upholstery that wipes clean with standard disinfectants, and scratch- and heat-resistant sintered stone surfaces that hold up to regular daily contact.
This set is well suited for corporate office lobbies, executive floor visitor waiting zones, high-rise office lounges, meeting room breakout spaces, and public service waiting areas, where its neutral taupe finish complements modern professional decor schemes. The modular 3+1+1 layout can be rearranged to suit different lobby sizes, supporting formal guest greeting, casual breakout discussions, and light refreshment service. For procurement planning, note that each set ships in two cartons, with an assembly time of 40 minutes per unit, and supports high-volume shipping for large-scale furnishing projects. The set accommodates a maximum of five occupants at a time, pairing durable construction with understated, versatile styling that integrates seamlessly with complementary low-profile potted plants and curated reading materials placed on table surfaces for guest comfort.

Modern Light Taupe Commercial Office Reception Seating Set with Nesting Coffee Tables Specifications

供应商与现货