| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
No parameter correction records exist. If you spot inaccurate data, click the flag icon at the end of the corresponding row to submit feedback. | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
| Three-seat sofa overall dimensions | 2100 x 880 x 850 mm | |
|---|---|---|
| Two-seat sofa overall dimensions | 1600 x 880 x 850 mm | |
| Single-seat armchair overall dimensions | 950 x 880 x 850 mm | |
| Seat height from floor | 420 mm | |
| Seat cushion depth | 580 mm | |
| Backrest total height | 450 mm | |
| Armrest height from seat surface | 200 mm | |
| Armrest width | 120 mm | |
| Clearance under sofa frame | 50 mm | |
| Seat cushion thickness | 120 mm | |
| Backrest padding thickness | 100 mm | |
| Wall clearance required behind units | 100 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
净重 / 最大承重 / 适用人数 / 耐久性能
| Three-seat sofa net weight | 65 kg | |
|---|---|---|
| Per-seat static load capacity | 150 kg | |
| Total seating capacity for full set | 6 persons | |
| Seat foam density | 40 kg/m³ | |
| Back foam density | 30 kg/m³ | |
| Upholstery abrasion resistance | 50000 Martindale cycles | |
| Seam tensile strength | 120 N | |
| Frame joint static load rating | 300 kg per seat | |
| Total sofa set seating capacity | 6 persons | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
| Outer upholstery | Black matte faux leather (PU leather) | |
|---|---|---|
| Seat cushion padding | High-density polyurethane foam | |
| Backrest padding | Medium-density polyurethane foam | |
| Armrest padding | Wrapped high-density foam over rigid frame | |
| Internal load-bearing frame | Kiln-dried solid wood + engineered wood panel | |
| Seat support base | Sinuous steel spring support system | |
| Support feet | Black injection-molded plastic glide feet | |
| Upholstery stitching | Bonded polyester thread with 8mm seam pitch | |
| Back panel lining | Black non-woven fabric dust cover | |
| Sofa outer upholstery | Black matte PU faux leather, 1.2mm thickness | |
| Sofa seat cushion padding | 40kg/m³ high-density polyurethane foam, 120mm thickness | |
| Sofa backrest padding | 30kg/m³ medium-density polyurethane foam, 100mm thickness |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
| Seating configuration | Fixed modular 3+2+1 layout | |
|---|---|---|
| Back support design | Fixed upright backrest angle of 105 degrees | |
| Armrest function | Fully padded fixed armrests on both sides of each unit | |
| Cleaning access function | 50mm floor clearance under all units | |
| Floor protection function | Smooth non-marking glide feet on all base corners | |
| Seating stability function | Fixed non-swivel, non-rocking frame structure | |
| Arrangement flexibility | Independent freestanding units | |
| Upholstery maintenance | Smooth non-porous upholstery surface | |
| Coffee table storage function | 2 side drawers plus full-width open lower shelf | |
| Coffee table leveling function | Adjustable rubber glide feet on all four table corners | |
| Cushion Service Configuration | Recommended 2 removable/replaceable cushion methods |
经核验的外箱 / 毛重 / 组装 / 装柜数据
| Full set packaging quantity | 3 cartons | |
|---|---|---|
| Three-seat sofa carton dimensions | 2150 x 930 x 680 mm | |
| Two-seat sofa carton dimensions | 1650 x 930 x 680 mm | |
| Single-seat armchair carton dimensions | 1000 x 930 x 680 mm | |
| Full set total gross shipping weight | 170 kg | |
| Full set total shipping volume | 2.42 CBM | |
| Assembly time per unit | 10 minutes | |
| Full set assembly time | 30 minutes | |
| 40ft HQ container loading capacity | 35 full sets | |
| Reference Package Count | 1 set / 2 cartons |
推荐空间 / 目标用户 / 使用方式
| Executive office reception areas | Formal black professional silhouette suits executive office visitor waiting zones, projecting a serious business image for client meetings | |
|---|---|---|
| Corporate lobby waiting areas | Durable upholstery and stable frame suitable for high-traffic main lobby seating for visiting guests and job candidates | |
| Conference room breakout zones | Upright supportive seating suitable for informal breakout discussions adjacent to formal meeting spaces | |
| Government and institutional meeting spaces | Conservative formal design matches standard government and institutional office aesthetic requirements for official meeting rooms | |
| Small business visitor areas | Modular flexible arrangement allows configuration to fit small office footprints without requiring custom furniture | |
| Recommended pairing furniture | Pairs with matching black frame office coffee tables and side tables for a cohesive coordinated reception space | |
| Cleaning suitability | Smooth non-porous upholstery is suitable for daily cleaning in high-traffic areas with regular janitorial maintenance | |
| Corporate main lobby waiting areas | 50000 Martindale abrasion-resistant upholstery and stable frame suitable for high-traffic main lobby seating for visiting guests, job candidates and vendor representatives |
欧洲市场准入与化学品要求
| Office furniture safety recommendation | EN 16139:2013 Furniture - Strength, durability and safety - Requirements for non-domestic seating | |
|---|---|---|
| Upholstered furniture flammability recommendation | EN 1021:2014 Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette | |
| Formaldehyde emission recommendation | EN 13986:2004 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking | |
| Surface durability recommendation | EN 14465:2003 Textiles - Upholstery fabrics - Specification and test methods | |
| Non-domestic seating strength and safety | EN 16139:2013 Furniture - Strength, durability and safety - Requirements for non-domestic seating | |
| Upholstered furniture ignitability | EN 1021:2014 Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette |
美国及加拿大办公家具标准
| Office seating durability recommendation | ANSI/BIFMA X2021 Lounge and Public Seating | |
|---|---|---|
| Stability recommendation | ANSI/BIFMA X2021 Clause 7 Stability | |
| Component durability recommendation | ANSI/BIFMA X2021 Clause 8 Durability | |
| Lounge seating performance | ANSI/BIFMA X2022 Lounge and Public Seating | |
| Lounge seating stability | ANSI/BIFMA X2022 Clause 7 Stability | |
| Lounge seating durability | ANSI/BIFMA X2022 Clause 8 Durability |
适用于中国市场项目的标准
| General safety recommendation | GB/T 3324 General technical requirements for wooden furniture | |
|---|---|---|
| Upholstered furniture flammability recommendation | GB 20286 Flame retardant requirements and mark for public place furniture and components | |
| Upholstered furniture performance recommendation | GB/T 39028 Upholstered furniture for office use | |
| Formaldehyde emission recommendation | Recommended references: GB 18584 | |
| Wooden furniture general safety | GB/T 3324 General technical requirements for wooden furniture | |
| Public place furniture flammability | GB 20286 Flame retardant requirements and mark for public place furniture and components |
本产品须满足以下技术参数要求： 1. General safety recommendation：GB/T 3324 General technical requirements for wooden furniture； 2. Upholstered furniture flammability recommendation：GB 20286 Flame retardant requirements and mark for public place furniture and components； 3. Upholstered furniture performance recommendation：GB/T 39028 Upholstered furniture for office use； 4. Formaldehyde emission recommendation：Recommended references: GB 18584； 5. Wooden furniture general safety：GB/T 3324 General technical requirements for wooden furniture； 6. Public place furniture flammability：GB 20286 Flame retardant requirements and mark for public place furniture and components； 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告，可选择公制或英制单位。
导出全部商品信息与参数模块，文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具The HUIBANG Black Faux Leather 3+2+1 Office Reception Sofa Set, model OFS-RCP-321-BLK01, is a commercial-grade seating collection designed for formal business environments. Delivered as three independent freestanding units—a three-seat sofa, two-seat sofa, and single-seat armchr—the set features a cohesive, structured silhouette with a consistent matte black finish, rolled padded armrests, and neatly stitched panel divisions across upholstered surfaces. All units share uniform depth and height, with a fixed upright backrest angle tlored for conversational and meeting posture, creating a polished, professional visual presence that reads as intentional and authoritative across layout configurations. The units can be arranged in parallel rows, L-shaped groupings, or dispersed seating clusters to fit avlable space, with no built-in connectors required to hold configurations in place. Construction centers on a kiln-dried solid wood and engineered wood frame supported by a sinuous steel spring seat base, wrapped in layered polyurethane foam for targeted support. Seat cushions use high-density foam to retn shape through regular use, while backrests use medium-density foam for balanced comfort during extended visits, all upholstered in smooth black matte PU faux leather treated for high abrasion resistance. Padded armrests sit at a height suited for relaxed arm resting during conversations, and non-marking injection-molded plastic glide feet protect hard flooring surfaces from scuffs and scratches. A 50mm clearance under each frame allows standard cleaning tools to access underneath without moving the heavy units, and the non-porous upholstery surface wipes clean easily to address light liquid spills in high-traffic zones. The full set accommodates six adults for upright formal seating, with a per-seat static load rating suited for general adult use. This set is well suited for executive office reception zones, corporate mn lobby wting areas, conference room breakout spaces, government and institutional meeting rooms, and small business visitor areas, as its conservative formal aesthetic aligns with professional brand presentation and its durable build stands up to frequent dly use. It prs seamlessly with matching black-frame office coffee and side tables for a cohesive reception design. Procurement teams should note that units ship in separate cartons with minimal on-site assembly required, as only support feet need to be attached to fully upholstered frames before placement. Wall clearance behind placed units is required to prevent scuffing and support r circulation, and buyers should confirm exact material grades, foam fire ratings, and internal component specifications with the supplier prior to final order placement, as some construction detls align with standard commercial furniture configurations rather than finalized supplier-measured documentation. Full contner load calculations are avlable for bulk orders to support large-scale furnishing projects.
关注我们