| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
No parameter correction records exist. If you spot inaccurate data, click the flag icon at the end of the corresponding row to submit feedback. | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
| Overall dimensions | 1200 x 400 x 1800 mm | |
|---|---|---|
| Upper sliding door section height | 800 mm | |
| Lower storage section height | 1000 mm | |
| Single upper frosted glass panel dimension | 520 x 700 mm | |
| Adjustable shelf depth in upper section | 360 mm | |
| Single middle drawer internal dimension | 320 x 340 x 100 mm | |
| Lower side door internal compartment width | 380 mm | |
| Handle length for solid doors and drawers | 100 mm | |
| Base plinth height | 50 mm | |
| Single central drawer internal dimension | 320 x 340 x 100 mm | |
| Cabinet carcass panel thickness | 0.8 mm | |
| Door and drawer front panel thickness | 1.0 mm | |
| Back panel thickness | 0.6 mm | |
| Upper compartment shelf thickness | 0.8 mm | |
| Carcass Panel Thickness | 25 mm | |
| Door / Drawer Front Thickness | 22 mm |
净重 / 最大承重 / 适用人数 / 耐久性能
| Net weight | 95 kg | |
|---|---|---|
| Total static load capacity | 300 kg | |
| Single adjustable shelf static load | 40 kg | |
| Single drawer static load | 20 kg | |
| Lower side compartment shelf load | 50 kg | |
| Lock system load resistance | 500 N lateral force | |
| Drawer slide cycle rating | 50000 cycles | |
| Hinge cycle rating | 100000 cycles | |
| Door hinge opening angle | 110 degrees | |
| Anti-tip anchor load rating | 1000 N pull force |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
| Cabinet body panels | 0.8mm thick 201 grade stainless steel sheet, brushed surface finish | |
|---|---|---|
| Upper door panels | 5mm thick frosted semi-opaque tempered safety glass, set in stainless steel door frames | |
| Door and drawer frames | 1.0mm thick stainless steel bent and welded construction, seamless edge treatment | |
| Hardware handles | Brushed 304 stainless steel pull handles, bolt-fixed to door and drawer fronts | |
| Lock cylinders | Zinc alloy keyed cam locks, separate locks for upper section, left lower door and right lower door | |
| Drawer slides | Cold rolled steel 3-section full extension ball bearing slides, zinc plated finish | |
| Adjustable shelf brackets | Stamped stainless steel shelf supports, 4 points per shelf | |
| Base plinth | 1.2mm thick stainless steel welded base frame, leveler feet at four corners | |
| Back panel | 0.6mm thick cold rolled steel sheet, spot welded to carcass rear frame for structural rigidity | |
| Edge protection | 0.5mm thick PVC edge banding on all exposed cut metal edges, bonded with hot melt adhesive to prevent sharp edges | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
| Upper door operation | Horizontal sliding glass doors, central lock secures both doors simultaneously to prevent unauthorized access to upper storage | |
|---|---|---|
| Upper shelf adjustment | 2 adjustable shelves per upper door compartment, adjustable on 50mm vertical increments to accommodate items of varying height | |
| Central drawer storage | 6 vertically stacked equal-size drawers, fully extendable for sorted small item, document or supply storage, no integrated lock on individual drawers | |
| Lower compartment storage | Two side hinged solid doors, each enclosing a single fixed shelf for bulkier items, each door fitted with independent key lock for secure separate storage | |
| Surface corrosion resistance | Brushed stainless steel finish resists water, disinfectant and routine cleaning, suitable for hygiene-sensitive environments | |
| Leveling adjustment | 4 adjustable threaded feet at base corners, adjust up to 15mm to compensate for uneven floors | |
| Anti-tip protection | 2 steel anti-tip wall connectors included, installed at upper rear of cabinet to secure to wall studs and prevent forward tipping when drawers/doors are fully extended | |
| Lock operation | Keyed alike option available for multi-cabinet deployments, standard configuration includes unique keys per lock point for compartmentalized access control | |
| Corrosion resistance | Epoxy powder coated finish resists water, routine cleaning chemicals and surface rust for 5 years under normal indoor office use | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
经核验的外箱 / 毛重 / 组装 / 装柜数据
| Number of packages | 1 | |
|---|---|---|
| Packaging carton dimensions | 1280 x 480 x 1880 mm | |
| Packaged gross weight | 115 kg | |
| Packaged volume | 1.16 CBM | |
| Assembly time required | 15 minutes | |
| 20ft GP container loading capacity | 18 units | |
| 40ft HQ container loading capacity | 45 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split |
推荐空间 / 目标用户 / 使用方式
| Office document storage | Suitable for general office back-of-house storage, with glass upper section for frequent reference materials and locked lower section for confidential documents | |
|---|---|---|
| Medical and clinic storage | Suitable for hospital, clinic and laboratory supply storage, with stainless steel surface that tolerates regular disinfection and cleaning | |
| Cleanroom and workshop storage | Suitable for industrial workshop, cleanroom or utility room storage of tools, parts and safety supplies, resistant to moisture and minor corrosion | |
| Archive and records room use | Suitable for long-term paper record storage, with adjustable shelves and multiple storage zones to sort documents by access frequency | |
| Restaurant and commercial kitchen storage | Suitable for back-of-house dry storage in commercial food service areas, with non-porous surface that is easy to wipe clean | |
| Medical clinic administration storage | Suitable for hospital administrative areas and clinic supply rooms, with smooth powder coated surface that tolerates regular disinfectant wiping without coating damage | |
| Industrial workshop storage | Suitable for factory workshop and utility room storage of tools, parts and safety supplies, resistant to moisture and minor surface impact better than laminate cabinets | |
| Educational facility storage | Suitable for school administration offices, teacher workrooms and classroom supply storage, with durable surface that resists scratches and frequent daily use |
欧洲市场准入与化学品要求
| BS EN 14073-2:2004 | Office furniture - Storage furniture, applies to safety and strength requirements for office storage units |
|---|
美国及加拿大办公家具标准
适用于中国市场项目的标准
| GB/T 13668-2015 | Steel storage cabinets for office use, applies to dimensional tolerance, structural strength and coating performance requirements for this product category | |
|---|---|---|
| GB/T 3324-2017 | General technical requirements for metal furniture, applies to material thickness, welding quality and edge safety requirements | |
| GB/T 28202-2011 | Hardware for furniture, applies to performance and durability requirements for locks, handles and drawer slides used on this cabinet | |
| GB/T 17657-2013 | Test methods for furniture surface coatings, applies to coating adhesion, hardness and corrosion resistance testing |
本产品须满足以下技术参数要求： 1. GB/T 13668-2015：Steel storage cabinets for office use, applies to dimensional tolerance, structural strength and coating performance requirements for this product category； 2. GB/T 3324-2017：General technical requirements for metal furniture, applies to material thickness, welding quality and edge safety requirements； 3. GB/T 28202-2011：Hardware for furniture, applies to performance and durability requirements for locks, handles and drawer slides used on this cabinet； 4. GB/T 17657-2013：Test methods for furniture surface coatings, applies to coating adhesion, hardness and corrosion resistance testing； 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告，可选择公制或英制单位。
导出全部商品信息与参数模块，文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具The Stainless Steel Sliding Glass Door Multi-Drawer Storage Cabinet, model SS-CAB-GD6D-1800, is an unbranded metal office storage cabinet sized to align with standard mnstream commercial storage specifications. Its vertically balanced layout splits into two primary zones: an upper section fitted with frosted semi-opaque glass sliding doors set in stainless steel frames, and a lower storage zone featuring a central bank of six equal, vertically stacked drawers flanked by two solid stainless steel hinged side doors. Uniform brushed stainless steel finishes and consistent 100mm pull handles across all operable panels create a cohesive, professional visual profile, while a rsed stainless steel base plinth lifts the unit off floor surfaces. The cabinet is constructed with a welded stainless steel frame, with 0.8mm thick panels forming the main carcass, 1.0mm thick reinforced panels for doors and drawer fronts to resist deformation, and a 0.6mm thick non-load-bearing cold rolled steel back panel secured with spot welds for structural rigidity. All exposed cut metal edges are finished with PVC edge banding to eliminate sharp edges, and hardware includes zinc alloy keyed cam locks, cold rolled steel full-extension ball bearing drawer slides, stamped stainless steel adjustable shelf supports, and adjustable threaded leveling feet at each base corner to compensate for uneven floors. Two steel anti-tip wall connectors are included for safe installation. Functionally, the upper section’s horizontal sliding doors operate without outward swing to preserve sle space, secured by a central lock, and contn adjustable shelves that move in set vertical increments to accommodate items of varying heights. The central drawers extend fully for sorted storage of small supplies, documents or tools, while the two lower side compartments each have a fixed shelf for bulkier items, with independent key locks for separate secure access; a keyed alike option is available for multi-unit deployments. The brushed stainless steel and coated surfaces resist water, routine cleaning chemicals and surface corrosion, standing up to regular disinfection without damage. This cabinet fits a broad range of commercial and residential-adjacent spaces, including general office back-of-house areas for document storage, medical clinics and laboratories for supply organization, industrial workshops and cleanrooms for tool and part storage, archive rooms for long-term records, commercial kitchen back-of-house for dry goods storage, and educational facility administration areas and workrooms for shared supply storage. For procurement, note the cabinet ships as a single fully welded unit, requiring only handle installation and foot leveling for setup, allowing efficient loading for bulk shipments. Standard configuration includes unique keys per lock point for compartmentalized access, and all material and hardware specifications should be confirmed directly with suppliers prior to final purchase, as core component grades are aligned to common commercial furniture standards.
关注我们