| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
No parameter correction records exist. If you spot inaccurate data, click the flag icon at the end of the corresponding row to submit feedback. | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
| Overall dimensions | 1800 x 650 x 420 mm | |
|---|---|---|
| Individual seat width | 580 mm | |
| Seat depth | 480 mm | |
| Seat surface height | 420 mm | |
| Leg splay width (per end frame) | 620 mm | |
| Center support beam cross-section | 80 x 40 mm | |
| Adjustable foot height adjustment range | 20 mm | |
| Seat panel thickness | 1.5 mm | |
| Leg wall thickness | 3 mm | |
| Divider height between seats | 30 mm | |
| Under-seat ground clearance | 300 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
净重 / 最大承重 / 适用人数 / 耐久性能
| Net weight per unit | 27 kg | |
|---|---|---|
| Static load capacity per seat | 200 kg | |
| Seat surface deflection under full load | 10 mm | |
| Recommended maximum daily occupancy cycles | 500 | |
| Surface corrosion resistance rating | 500 hours | |
| Seat surface deflection under rated load | 10 mm | |
| Daily occupancy cycle rating | 500 cycles | |
| Chrome finish corrosion resistance | 500 hours | |
| Coating adhesion rating | Grade 0 | |
| Tip resistance load | 60 kg |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
| Seat panels | 1.5mm perforated cold-rolled steel, chrome-plated polished finish | |
|---|---|---|
| Main support beam | Rectangular steel tube, black epoxy powder coated finish | |
| End leg assemblies | Die-cast aluminum alloy, polished chrome plated finish | |
| Seat dividers | Pressed steel, chrome plated finish | |
| End armrest (left only) | Nylon reinforced plastic, black matte finish | |
| Leveling feet | Chrome plated steel with rubber contact pad | |
| Fasteners | Stainless steel hex head bolts | |
| Surface treatment | Triple-layer chrome plating on visible metal parts | |
| Left end armrest | Nylon-reinforced polypropylene plastic, matte black finish, curved ergonomic grip profile | |
| Assembly fasteners | M8 stainless steel hex head bolts and lock nuts | |
| End beam caps | ABS plastic, matte black finish, impact-resistant | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
| Seating configuration | 3 individual fixed-position seats in linear tandem layout | |
|---|---|---|
| Installation type | Free-standing with adjustable leveling feet, no permanent floor anchoring required | |
| Seat design | Curved front seat edge and textured perforated surface to reduce slipping and improve air circulation | |
| Floor leveling | Threaded adjustable feet on each leg to compensate for uneven floor surfaces, eliminate wobble | |
| Cleaning access | 300mm under-seat clearance allows full floor mopping and debris removal without moving the bench | |
| Structural bracing | Full-length rectangular steel beam connects both end frames to eliminate racking and distribute load evenly | |
| End armrest feature | Single integrated nylon armrest at left end provides support for first seat occupant, assists with standing | |
| Seating layout | 3 fixed individual seat positions in linear tandem arrangement, separated by integrated raised metal dividers to define personal space | |
| Installation | Free-standing placement with 4 adjustable leveling feet, no permanent floor anchoring required for standard indoor installation | |
| Seat ergonomics | Curved 15mm radius front seat edge and perforated textured surface reduce leg pressure, prevent occupant slippage, and enable passive air circulation | |
| Floor compensation | Threaded 20mm stroke adjustable feet at each leg eliminate wobble on uneven tile, concrete, or carpeted flooring | |
| Structural rigidity | Full-length rectangular steel support beam connects both end leg frames to eliminate lateral racking and evenly distribute occupant load across the full structure |
经核验的外箱 / 毛重 / 组装 / 装柜数据
| Packaged carton dimensions | 1850 x 700 x 200 mm | |
|---|---|---|
| Packaged gross weight | 31 kg | |
| Packaged volume (CBM) | 0.26 CBM | |
| Assembly time per unit | 20 minutes | |
| 20ft GP container loading capacity | 104 units | |
| 40ft HQ container loading capacity | 262 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set |
推荐空间 / 目标用户 / 使用方式
| Transportation hubs | Suitable for airport, train station, and bus terminal waiting areas | |
|---|---|---|
| Healthcare facilities | Appropriate for hospital outpatient clinics, emergency room waiting zones, and medical office lobbies | |
| Public service offices | Ideal for government service centers, bank lobbies, and DMV waiting areas | |
| Commercial public spaces | Usable for shopping mall rest zones, exhibition halls, and convention centers | |
| Educational facilities | Suitable for school administration lobbies, student service centers, and campus common areas | |
| Installation note | Recommended for indoor use only; chrome plated surfaces are not rated for permanent outdoor exposure without additional weather sealing | |
| Indoor use limitation | Recommended for fully indoor installation only; standard chrome plated surfaces are not rated for permanent outdoor exposure without additional weatherproof sealing | |
| Recommended Matching Desk Size | 2.4 m executive desk |
欧洲市场准入与化学品要求
| Public seating stability recommendation | EN 16139:2013 Furniture — Seating for non-domestic use — Strength, durability and safety | |
|---|---|---|
| Surface durability recommendation | EN 12720:2009 Furniture — Assessment of surface resistance to cold liquids | |
| Public seating strength recommendation | EN 16139:2013 Furniture - Seating for non-domestic use - Strength, durability and safety | |
| Surface resistance recommendation | EN 12720:2009 Furniture - Assessment of surface resistance to cold liquids | |
| Slip resistance recommendation | EN 13036:2011 Road and airfield surface characteristics - Test methods - Part 4: Pendulum test |
美国及加拿大办公家具标准
| Public seating load recommendation | ANSI/BIFMA X2017General Purpose Office Chairs — Seating static and dynamic load tests | |
|---|---|---|
| Stability recommendation | ANSI/BIFMA X2017Stability testing for free-standing seating |
适用于中国市场项目的标准
| Public seating structural safety recommendation | GB/T 3324General technical requirements for metal furniture | |
|---|---|---|
| Coating adhesion recommendation | GB/T 4893.4Furniture surface test — Adhesion of paint films | |
| Edge safety recommendation | GB 28007Safety requirements for children's furniture (applicable for public spaces with minor access) | |
| Structural safety recommendation | GB/T 3324General technical requirements for metal furniture | |
| Coating performance recommendation | GB/T 4893.4Test of surface coatings for furniture - Part 4: Determination of adhesion | |
| Corrosion resistance recommendation | GB/T 2007Determination of resistance to neutral salt spray for paints and varnishes |
本产品须满足以下技术参数要求： 1. Public seating structural safety recommendation：GB/T 3324General technical requirements for metal furniture； 2. Coating adhesion recommendation：GB/T 4893.4Furniture surface test — Adhesion of paint films； 3. Edge safety recommendation：GB 28007Safety requirements for children's furniture (applicable for public spaces with minor access)； 4. Structural safety recommendation：GB/T 3324General technical requirements for metal furniture； 5. Coating performance recommendation：GB/T 4893.4Test of surface coatings for furniture - Part 4: Determination of adhesion； 6. Corrosion resistance recommendation：GB/T 2007Determination of resistance to neutral salt spray for paints and varnishes； 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告，可选择公制或英制单位。
导出全部商品信息与参数模块，文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具The WEINENG WB-MTL-3S-001 3-Seat Metal Public Wting Bench features a streamlined armless flat configuration with a single ergonomic matte black nylon-reinforced armrest positioned at its left end to support entry and standing assistance for occupants. Three distinct individual seat positions are arranged in a linear tandem layout, separated by low-profile rsed chrome-plated steel dividers that clearly define personal space without blocking open movement along the seating row. Visible metal surfaces including perforated seat panels, die-cast aluminum tripod-style end legs, and seat dividers carry a polished triple-layer chrome finish, pred with a black epoxy powder-coated full-length rectangular steel support beam, matte black impact-resistant ABS beam end caps, and chrome-plated steel leveling feet fitted with rubber contact pads to prevent floor scratching. All assembly hardware uses corrosion-resistant M8 stnless steel hex head bolts and lock nuts for long-term structural integrity. Perforated cold-rolled steel seat panels are shaped with a curved front edge to reduce leg pressure, with a textured surface that prevents occupant slippage and supports passive r circulation. The free-standing design requires no permanent floor anchoring, with threaded adjustable feet at every ground contact point to compensate for uneven flooring and eliminate wobble. Generous under-seat clearance allows unobstructed access for floor mopping and debris removal without repositioning the bench, while the continuous central support beam distributes occupant weight evenly across the frame to prevent lateral racking. This bench is suited for high-traffic indoor commercial and public spaces including rport, trn station and bus terminal wting areas, hospital outpatient clinics and medical office lobbies, government service centers, bank lobbies, shopping mall rest zones, exhibition halls, and school administration common areas. Its non-porous metal surfaces support easy sanitization, and its polished chrome finish coordinates with modern public interior design schemes. It is rated for indoor use only, as standard chrome plating is not engineered for permanent outdoor exposure without supplementary weather sealing. Procurement teams should note the product ships in knock-down flat pack format for efficient contner loading, with strghtforward on-site assembly, and should confirm coating performance and dimensional specifications with suppliers prior to large-volume orders to align with project-specific requirements.
关注我们