| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
No parameter correction records exist. If you spot inaccurate data, click the flag icon at the end of the corresponding row to submit feedback. | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
| Overall dimensions | 1750 x 650 x 800 mm | |
|---|---|---|
| Single seat width | 500 mm | |
| Seat depth | 400 mm | |
| Seat height from floor | 450 mm | |
| Backrest height | 400 mm | |
| Backrest thickness (formed panel) | 20 mm | |
| Armrest height from seat surface | 220 mm | |
| Support leg spread width | 1600 mm | |
| Floor pad diameter | 50 mm | |
| Armrest diameter (tubing) | 25 mm | |
| Seat panel thickness | 1.2 mm | |
| Perforation diameter (back panel) | 5 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
净重 / 最大承重 / 适用人数 / 耐久性能
| Product net weight range | 28 kg | |
|---|---|---|
| Per-seat static load capacity | 150 kg | |
| Maximum number of seated users | 3 | |
| Seat edge static impact resistance | 45 kg drop from 300mm height | |
| Frame connection static load endurance | 20000 cycles of 100kg per seat | |
| Corrosion resistance suitability | Indoor and semi-outdoor covered use | |
| Floor load distribution | Equalized across 4 support legs | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
| Seat panels | 1.2mm thick 201 stainless steel sheet with polished finish and rounded rolled front edge | |
|---|---|---|
| Backrest panels | 1.0mm thick 201 stainless steel perforated sheet with uniform 5mm round holes, reinforced formed perimeter edges | |
| Main support beam | 2.0mm thick rectangular stainless steel tube running full bench length under seats, welded to seat supports | |
| Support legs | 2.5mm thick formed stainless steel Y-spider legs, welded to main beam with integral floor glide mounts | |
| Armrests | 25mm diameter polished stainless steel round tube, bent to ergonomic curve, welded to side seat frames | |
| Floor glides | Stainless steel adjustable threaded glides with non-marring rubber contact pads | |
| Seat/back partitions | 1.5mm thick formed stainless steel dividers between each seat, separating individual seating positions | |
| Surface finish | No.4 brushed stainless steel finish across all components, no applied coating or upholstery | |
| Hardware and fasteners | All-stainless steel welded construction at primary joints, no exposed ferrous fasteners | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
| Fixed non-reclining seating configuration | All seats and backrests are permanently mounted to the main support beam at a fixed 105 degree seat-to-back angle, no adjustment mechanisms | |
|---|---|---|
| Integrated end armrests | Curved polished armrests fitted at both extreme ends of the 3-seat bench, providing arm support for outermost users and defined bench boundaries | |
| Perforated back ventilation | Full-perforation backrest panels allow constant air circulation between user and backrest, reducing heat buildup during extended waiting periods | |
| Adjustable floor leveling | Threaded adjustable glides at the base of each 4 support legs rotate to compensate for 10mm of uneven floor height, eliminating bench rock when installed on tile or concrete surfaces | |
| Fixed individual seat separation | Vertical stainless steel dividers between each adjacent seat define clear 500mm wide individual seating positions, discouraging overcrowding and improving personal space for waiting users | |
| Sanitization-compatible design | Smooth, non-porous all-stainless steel surfaces with no fabric, seams or recessed crevices allow full wipe-down disinfection with standard hospital-grade cleaning agents | |
| Fixed floor-ready installation | Bench is delivered as a single fully welded integrated unit, requiring no assembly of seat or back components, only placement and glide leveling before use | |
| Anti-tip structural design | Splayed 4-point spider leg geometry extends beyond the seat perimeter, with a wide support base that prevents forward or sideways tipping even under uneven user loading | |
| Recline Angle / Lock Reference | 125° with 3 suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
经核验的外箱 / 毛重 / 组装 / 装柜数据
| Number of shipping packages | 1 unit | |
|---|---|---|
| Shipping carton dimensions | 1800 x 700 x 500 mm | |
| Gross shipping weight | 32 kg | |
| Shipping volume per unit (CBM) | 0.63 cbm | |
| On-site assembly time | 10 minutes | |
| 20ft GP container loading quantity | 42 units | |
| 40ft HQ container loading quantity | 105 units | |
| Protective packaging materials | 50mm EPE foam wrap on all metal surfaces, corrugated cardboard corner protectors, stretch wrap over full unit | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
推荐空间 / 目标用户 / 使用方式
| Hospital clinic waiting areas | All-stainless steel construction withstands frequent sanitization, heavy daily use, and exposure to medical cleaning chemicals, ideal for high-turnover patient waiting zones | |
|---|---|---|
| Airport, rail and bus terminal waiting halls | Heavy-duty rigid construction supports continuous heavy passenger traffic, perforated backs remain comfortable for extended waiting periods, and non-upholstered surfaces resist staining from luggage or food spills | |
| Government service hall and bank queuing areas | Defined 3-seat configuration provides orderly, durable seating for citizens and customers, easy to maintain between service peaks, and neutral metallic finish matches formal public interior design | |
| Outpatient and emergency department public corridors | Non-porous seamless construction allows rapid disinfection between users, reducing infection risk in high-traffic medical environments with no fabric to trap contaminants | |
| School administration and public lobby areas | Sturdy construction resists rough handling and heavy student use, requires no routine upholstery maintenance, and provides long service life with minimal upkeep | |
| Semi-outdoor covered bus stops and station platforms | Stainless steel material resists humidity and occasional rain exposure under cover, does not rust or degrade from weather exposure in partially protected outdoor locations | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
欧洲市场准入与化学品要求
| EN 16139:2013 Furniture - Strength, durability and safety - Non-domestic seating | Applies as acceptance reference for strength, stability and safety requirements for non-domestic public waiting seating | |
|---|---|---|
| EN 10088-2:2014 Stainless steels - Technical delivery conditions for sheet/plate and strip of corrosion resisting steels | Applies as reference for stainless steel sheet material properties and corrosion resistance requirements for construction components |
美国及加拿大办公家具标准
适用于中国市场项目的标准
| GB/T 3324-2017 General technical requirements for metal furniture | Applies as acceptance reference for dimensional tolerance, welded joint quality, surface finish quality and structural stability of this all-stainless steel public seating unit | |
|---|---|---|
| GB/T 10357.3-2013 Test of mechanical properties of furniture - Strength and durability of chairs and stools | Applies as acceptance reference for seat static load, backrest static load, impact resistance and fatigue cycle testing for public use seating | |
| GB/T 24821-2009 Public seating for airport terminals | Applies as reference specification for heavy-duty public gang seating used in high-traffic waiting areas, covering load ratings and safety clearances |
本产品须满足以下技术参数要求： 1. GB/T 3324-2017 General technical requirements for metal furniture：Applies as acceptance reference for dimensional tolerance, welded joint quality, surface finish quality and structural stability of this all-stainless steel public seating unit； 2. GB/T 10357.3-2013 Test of mechanical properties of furniture - Strength and durability of chairs and stools：Applies as acceptance reference for seat static load, backrest static load, impact resistance and fatigue cycle testing for public use seating； 3. GB/T 24821-2009 Public seating for airport terminals：Applies as reference specification for heavy-duty public gang seating used in high-traffic waiting areas, covering load ratings and safety clearances； 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告，可选择公制或英制单位。
导出全部商品信息与参数模块，文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具The 3-Seat All-Stnless Steel Perforated Public Wting Chr is a purpose-built gang seating unit designed for high-turnover shared spaces, featuring a clean, linear layout with three evenly divided seating positions defined by subtle vertical dividers, integrated curved end armrests, and a splayed four-leg support base. All structural and contact components—including the frame, seat pans, backrests, and armrests—are constructed from 201 stnless steel with a uniform No.4 brushed non-glare finish. Seats feature rounded rolled front edges for user comfort and safety, while backrests use perforated stnless steel panels to reduce overall weight and enable consistent r circulation. Primary joints are fully welded with no exposed ferrous fasteners to eliminate rust points, and adjustable threaded stnless steel glides with non-marring rubber pads sit at the end of each Y-spider leg to compensate for uneven floor surfaces and prevent hard floor scratching. The fixed non-reclining seat-to-back angle is optimized for short-term wting use, with vertical dividers between seats to delineate personal space and discourage overcrowding. The smooth, non-porous seamless surface supports full wipe-down disinfection with standard cleaning agents, as there are no fabric coverings, deep crevices, or seams to trap dirt or contaminants. The integrated curved end armrests prevent personal items from sliding off seat edges while providing stable support for entry and exit, and the wide splayed leg base delivers anti-tip stability even under uneven user loading. The unit ships as a single fully welded integrated structure, requiring only placement and glide leveling before use with no assembly of core structural components. This seating solution is well suited for hospital clinic wting areas, emergency department corridors, rport and rl terminal wting halls, government service halls, bank queuing zones, school public lobbies, and covered semi-outdoor bus stops or station platforms. Its stnless steel construction resists routine cleaning, humidity, and stning from spills or luggage contact in heavy-use environments. For procurement planning, teams should confirm material grade compliance via supplier bill of materials prior to purchase, account for single-unit shipping dimensions and weight when coordinating freight and loading, note the minimal on-site setup time relative to knock-down seating alternatives, and verify that the unit’s corrosion resistance is aligned with intended semi-outdoor placement conditions to support long service life.
关注我们