| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
No parameter correction records exist. If you spot inaccurate data, click the flag icon at the end of the corresponding row to submit feedback. | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
| Overall dimensions | 680 x 850 x 1150 mm | |
|---|---|---|
| Seat height from floor | 450 mm | |
| Seat width | 520 mm | |
| Seat depth | 480 mm | |
| Backrest height | 700 mm | |
| Headrest dimensions | 320 x 200 x 80 mm | |
| Armrest height from seat | 220 mm | |
| IV pole height from floor | 1800 mm | |
| IV hook quantity | 2 hooks | |
| Leg spread width (base) | 650 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
净重 / 最大承重 / 适用人数 / 耐久性能
| Net product weight | 28 kg | |
|---|---|---|
| Maximum static user weight capacity | 150 kg | |
| Backrest static load capacity | 80 kg | |
| IV pole maximum vertical load | 10 kg | |
| Recline mechanism cycle life | 12000 cycles | |
| Floor glide static friction coefficient | 0.6 | |
| Upholstery abrasion resistance | 50000 double rubs | |
| Frame corrosion resistance | 1000 hours | |
| Upholstery fluid repellency rating | 4 grade | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
| Primary frame construction | 25mm diameter chrome-plated cold-rolled steel tube, 1.5mm wall thickness | |
|---|---|---|
| Seat, back and headrest padding | 40mm high-resilience polyurethane foam, 40kg/m3 density | |
| Upholstery fabric | Medical-grade green polyester fabric, anti-bacterial, fluid-repellent finish | |
| Armrests | Bent steel support frame with dark wood-grain laminated composite arm pads | |
| IV pole construction | 19mm diameter chrome-plated steel tube, height-adjustable with 2 chrome-plated steel hooks | |
| Recline adjustment hardware | Black powder-coated steel locking hinge mechanism with manual release lever | |
| Floor contact glides | 30mm diameter non-marking black rubber fixed glides | |
| Underseat support panel | Perforated steel support mesh under seat cushion | |
| Seam construction | Stitched upholstery seams, 8 stitches per inch seam pitch | |
| Frame finish | Triple-layer polished chrome plating with corrosion-resistant clear topcoat | |
| Primary structural frame | 25 mm diameter chrome-plated cold-rolled steel tube, 1.5 mm wall thickness | |
| Armrest assemblies | 12 mm bent chrome-plated steel support frames with dark wood-grain laminated composite arm pads, 2 mm edge banding |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
| Backrest recline adjustment | Manual ratchet locking mechanism, 4 locking positions between 95 degrees upright and 160 degrees full recline, release via under-seat lever | |
|---|---|---|
| IV pole height adjustment | Tool-less height adjustment via side-mounted locking knob, 600mm vertical travel to accommodate different fluid bag heights | |
| Fixed stable base | Four-point fixed leg design with rubber glides, no casters to prevent unwanted movement during infusion treatment | |
| Fixed position armrests | Rigid curved armrests positioned to support patient arms during IV access and extended seating, no flip or height adjustment | |
| Integrated head support | Fixed padded headrest positioned to support neck and head in both upright and reclined positions | |
| Easy-clean surface design | Smooth chrome frame and non-porous upholstery allow disinfection between patient uses | |
| Dual IV bag support | Two curved hooks at top of IV pole support hanging of standard IV fluid bags or infusion pump accessories | |
| Corrosion-resistant construction | All metal components use chrome plating suitable for regular clinical disinfection wipe-down | |
| Reclined overall depth | 1200 mm | |
| Backrest recline angle range | 110 degrees | |
| Static stable base support | Four-point splayed fixed leg design with rubber glides, no casters to prevent unwanted movement during IV cannulation and treatment | |
| Fixed forearm support armrests | Rigid triangulated wire-frame armrests positioned to support full patient forearms during IV access and extended seating, no flip-up or height adjustment capability |
经核验的外箱 / 毛重 / 组装 / 装柜数据
| Number of shipping packages | 1 unit | |
|---|---|---|
| Shipping carton dimensions | 820 x 680 x 900 mm | |
| Gross shipping weight | 32 kg | |
| Shipping volume per unit | 0.5 CBM | |
| Assembly time on site | 15 minutes | |
| 20ft GP container loading quantity | 52 units | |
| 40ft HQ container loading quantity | 124 units | |
| Packaging materials | 5-layer corrugated carton, EPS foam edge protection, polyethylene film wrap | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
推荐空间 / 目标用户 / 使用方式
| Hospital outpatient infusion centers | Designed for extended patient seating during intravenous therapy, with recline function and integrated IV pole for clinical workflow efficiency | |
|---|---|---|
| Clinic treatment rooms | Suitable for minor procedure and observation use, with stable fixed base and easy-clean surfaces for repeated patient use | |
| Blood donation centers | Adjustable recline position supports donor comfort during phlebotomy and post-donation recovery periods | |
| Community health service centers | Durable construction and compact footprint suit high-volume public primary care settings | |
| Post-operative recovery wards | Reclining position and padded support accommodate patients requiring short-duration seated recovery after procedures | |
| Dialysis center waiting and treatment zones | Durable fabric and load-rated frame support extended seating sessions for outpatient dialysis care | |
| Configuration recommendation | Place at 1200mm minimum spacing between adjacent chairs to allow clinical staff access to patients from all sides during IV administration | |
| General practice clinic treatment rooms | Suitable for minor procedure use and short-term patient observation, with stable fixed base and disinfection-compatible surfaces for high patient turn-over |
欧洲市场准入与化学品要求
| EN 16139:2013 | Applicable European standard for non-domestic seating strength, durability and safety, recommended for structural load testing | |
|---|---|---|
| EN 13722:2004 | Applicable standard for furniture seating test methods for stability, recommended for verification of fixed leg stability in all recline positions |
美国及加拿大办公家具标准
适用于中国市场项目的标准
| GB/T 3328-2016 | Applicable standard for metal furniture general technical requirements, recommended for frame strength and finish quality inspection | |
|---|---|---|
| GB 28007-2011 | Applicable standard for children's and institutional furniture safety, recommended for edge rounding and structural safety verification for clinical use | |
| GB/T 19001-2016 | Applicable quality management system standard for medical furniture supply chain consistency | |
| GB/T 16799-2008 | Furniture upholstery fabric performance standards, recommended for abrasion resistance and color fastness verification for clinical cleaning protocols |
本产品须满足以下技术参数要求： 1. GB/T 3328-2016：Applicable standard for metal furniture general technical requirements, recommended for frame strength and finish quality inspection； 2. GB 28007-2011：Applicable standard for children's and institutional furniture safety, recommended for edge rounding and structural safety verification for clinical use； 3. GB/T 19001-2016：Applicable quality management system standard for medical furniture supply chain consistency； 4. GB/T 16799-2008：Furniture upholstery fabric performance standards, recommended for abrasion resistance and color fastness verification for clinical cleaning protocols； 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告，可选择公制或英制单位。
导出全部商品信息与参数模块，文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具The KERTE MED-INF-CHR-001 Reclining Medical Infusion Chr with Integrated IV Pole is a purpose-built clinical seating solution designed to balance patient comfort, clinical functionality, and long-term durability in high-traffic care environments. Visually, the chr presents a streamlined, functional profile with a polished chrome tubular frame, dark green medical-grade upholstered seat, backrest, and fixed padded headrest, pred with dark wood-grn finished arm pads for a warm, approachable clinical aesthetic. Its four-point splayed fixed leg base terminates in non-marking black rubber glides, with no casters to prevent unintended movement during care, and a height-adjustable chrome IV pole mounts to the left side of the frame, finished with two curved hooks for infusion supplies. Construction centers on a robust chrome-plated cold-rolled steel tube frame, finished with a triple-layer polished chrome coating and corrosion-resistant clear topcoat to withstand regular hospital-grade disinfection. Seat, backrest, and headrest cushions use high-resilience polyurethane foam, upholstered in anti-bacterial, fluid-repellent medical-grade polyester fabric with tightly stitched seams for easy cleaning; a perforated steel support mesh sits beneath the seat cushion for consistent, breathable support. Armrests are built on triangulated bent chrome steel supports, fitted with laminated composite wood-grn pads positioned at a fixed height ideal for forearm support during IV access. The integrated IV pole uses chrome-plated steel tubing, while the manual recline mechanism relies on a powder-coated steel locking hinge with an under-seat release lever. Practically, the chr offers four locked recline positions ranging from upright seating to full recline via a simple manual lever, with tool-less height adjustment for the IV pole to accommodate different infusion setups. The fixed armrests and dedicated padded headrest support patients across upright and reclined positions, while smooth, non-porous surfaces across the frame and upholstery enable fast, thorough disinfection between patient uses. The static base provides stable support during IV cannulation and treatment, with load ratings suited to diverse patient needs and durable upholstery engineered to withstand repeated heavy use. This chr is well-suited for a wide range of care settings, including hospital outpatient infusion centers, clinic treatment rooms, blood donation centers, community health service centers, post-operative recovery wards, and dialysis treatment zones. When planning layouts, mntn a minimum 1200mm gap between adjacent chrs to enable full staff access around each patient during care delivery. For procurement, note that final assembly requires on-site attachment of the IV pole and tightening of frame hardware, with units shipped in protective corrugated packaging with foam edge protection. Buyers should confirm exact material specifications, final assembly requirements, and packaging detls directly with the supplier prior to purchase, as bulk contner loading capacities are calculated for standard freight planning for high-volume orders.
关注我们