纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	630 × 620 × 1070 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight	120 kg
Net weight range	15 kg; published value 15 kg
Static seat load verification	680 kg downward seat load
Backrest cyclic durability	120,000 recline cycles
Seat slider durability	100,000 height-adjustment cycles
Caster rolling durability	100,000 cycles on hard surface
Recommended daily use	8 hours per user shift
Seating capacity	1 person
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Backrest mesh	Black flexible woven mesh stretched over a curved polymer outer frame
Back frame	Injection-molded black polymer frame with contoured shoulder and side rails
Lumbar support	Fixed padded black lumbar pad attached across the lower mesh zone
Seat cushion	70 mm high-resilience molded polyurethane foam with black woven fabric upholstery
Seat inner support	9 mm molded plywood or polymer seat board with steel mounting plate
Armrests	Fixed black polymer T-arm pads supported by vertical polymer posts

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Height adjustment	Pneumatic seat-height lift operated by the visible right-side lever, with a 100 mm selected travel and 530 mm range
Recline and tension	Center-tilt mechanism with rear tension knob, providing 18 degrees of synchronized back recline and 3 lock positions
Mobility	Five twin-wheel casters provide rolling movement on hard floors or low-pile carpet
Recline Angle / Lock Reference	125° with 3suggested lock positions

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

20-foot container loading	190 cartons
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Workstation use	Individual open-plan or private office desk seating where breathable mesh back support and rolling swivel access are required
Project procurement fit	Suitable for bulk office fit-outs, training rooms, and shared workpoints needing fixed arms and compact caster footprint

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

该市场暂无标准数据。

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.1

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

该市场暂无标准数据。

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. 技术标准与检测报告由供应商在投标或采购确认阶段提供；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OC-MESH-FA-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OC-MESH-FA-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OC-MESH-FA-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Black Mesh Swivel Task Chair with Fixed Arms and Lumbar Pad, model OC-MESH-FA-01, presents a practical office seating solution under an unbranded label. Its visual character is defined by a black flexible woven mesh back stretched over a curved injection-molded polymer frame, with contoured shoulder and side rails that give the backrest a structured yet open appearance. A fixed padded black lumbar pad spans the lower mesh zone, while black polymer T-arm pads on vertical posts create a consistent, streamlined side profile. The black fabric-upholstered foam seat pairs with a black steel gas lift and five-star base, producing a coordinated look suited to neutral office interiors. Construction balances comfort and support. The seat uses 70 mm high-resilience molded polyurethane foam over a 9 mm molded plywood or polymer seat board with a steel mounting plate; the finished cushion thickness is 90 mm. The backrest padding thickness is 70 mm, and the lumbar support zone is 240 mm high. Fixed armrests leave a 540 mm clear width between them. Twin nylon casters complete the base assembly. The chair is recommended for users up to 120 kg and is intended for an 8-hour user shift. Published verification includes a 680 kg downward static seat load, 120,000 recline cycles, 100,000 height-adjustment cycles, and 100,000 caster rolling cycles on hard surface. Daily operation is handled through a pneumatic seat-height lift controlled by the visible right-side lever, with 100 mm selected travel within a 530 mm height range. A center-tilt mechanism with rear tension knob enables 18 degrees of synchronized back recline, with a 125-degree recline reference and three suggested lock positions. Swivel movement and five twin-wheel casters support rolling access on hard floors or low-pile carpet, while the breathable mesh back and fixed lumbar pad provide a consistent supported posture. The chair fits individual open-plan or private office desk seating where breathable back support and rolling swivel access are priorities. It is also appropriate for bulk office fit-outs, training rooms, and shared workpoints requiring fixed arms and a compact caster footprint. Procurement planning should account for delivery as one set in two cartons, 23 kg packaged gross weight per set, 0.26 cubic meter package volume, and reference carton dimensions of 850 by 420 by 720 mm. Assembly time is referenced at 40 minutes per set, and a 20-foot container accommodates 190 cartons.

Black Mesh Swivel Task Chair with Fixed Arms and Lumbar Pad Specifications

供应商与现货