纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1890 × 2200 × 950 mm
Overall outer dimensions	1890 x 2200 x 950 mm
Mattress support area	1800 x 2000 mm
Headboard height	950 mm
Footboard height	350 mm
Floor to slat support height	260 mm
Under-bed clearance	200 mm
Support leg cross-section	60 x 60 mm
Headboard panel thickness	25 mm
Footboard panel thickness	25 mm
Side rail thickness	30 mm
Slat thickness	20 mm
Slat spacing	76 mm
Center support rail count	1
Matching nightstand dimensions	480 x 400 x 500 mm
Center Support Leg Count	Recommended 6legs

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total static weight capacity	454 kg
Recommended mattress thickness	250 mm
Product net weight	90 kg
Nightstand individual weight capacity	20 kg
Nightstand drawer load capacity	10 kg
Structural service life	8 years
Finish scratch resistance	2000 cycles
Bed Static Load Reference	400 kg
Per-slat Load Reference	60 kg
Recommended Procurement Warranty	Frame 10 years; hardware 5 years; upholstery 2 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Headboard panels	Solid oak wood, natural light tone
Footboard panel	Solid oak wood, matching light finish
Support legs	Solid square oak wood, matte natural finish
Side frame rails	Solid oak wood, doweled and screwed joinery
Mattress slats	Solid pine wood, sanded smooth
Center support rail	Solid pine wood, reinforced with center leg
Surface finish	Matte clear UV lacquer, low VOC
Hardware connectors	Zinc-plated steel bolts, dowel pins
Nightstand drawer fronts	Solid oak wood, matching bed finish
Nightstand drawer boxes	Plywood, dovetail joinery
Slat Thickness	15 mm bent plywood or solid timber
Primary Connector Specification	Reference M8-M10 bolts with at least 2 fixing points per corner

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Mattress support	Slatted platform base, no box spring required
Assembly method	Knock-down flat pack assembly, hardware included
Headboard design	Fixed horizontal panel with recessed detail
Nightstand configuration	Freestanding matching 2-drawer units on both sides
Under-bed access	Open clearance without storage compartments
Edge treatment	Rounded smooth edges on all frame corners
Hardware tightness	Adjustable leveling feet option for uneven floors
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2300× 900× 450 mm/carton in 4 cartons
Reference Packaged Gross Weight	130 kg/set
Reference Packaging Volume	0.9 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Primary application space	Residential master bedrooms, Nordic/Japanese minimalist interior schemes
Secondary application space	Small secondary bedrooms, rental apartments, Airbnb short-term rentals
Target user group	Adult users preferring natural wood furniture, no upholstered surfaces
Recommended configuration	Pair with 250 mm thick foam or hybrid mattress, matching two nightstands
Compatible floor types	Wood flooring, laminate, tile, and low-pile carpet
Style coordination	Pairs with light neutral bedding, blue or earth-tone walls, sheer curtains

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1725:1998	Furniture - Beds and mattresses - Safety requirements and test methods, applicable for structural safety
EN 12521:2015	Furniture - Strength, durability and safety for domestic seating, applicable for edge and load testing
EN 71-3:2019+A1:2021	Safety of toys - Migration of certain elements, applicable for surface coating heavy metal limits

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for frame strength and dimensional tolerance
GB 18584-2001	Indoor decoration material limit of harmful substances for wood furniture, applicable for formaldehyde emission
GB/T 17657-2013	Test methods for physical and chemical properties of wood-based panels, applicable for finish durability

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable for frame strength and dimensional tolerance；
2. GB 18584-2001：Indoor decoration material limit of harmful substances for wood furniture, applicable for formaldehyde emission；
3. GB/T 17657-2013：Test methods for physical and chemical properties of wood-based panels, applicable for finish durability；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · PF-OAK1800-KG-LF

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · PF-OAK1800-KG-LF

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · PF-OAK1800-KG-LF打开导出工具

页面快速操作

发布采购询价

产品描述

The Minimalist Light Oak Solid Wood Platform Bed Frame with Matching Nightstands is a cohesive, low-profile sleeping suite defined by clean, unadorned Nordic minimalist lines. The set features a fixed horizontal headboard with subtle recessed detail, a lower matching footboard, and rounded, smooth edges across all frame corners for a soft, streamlined visual profile. It is paired with two freestanding 2-drawer nightstands finished to match the bed frame, creating a balanced, unified layout suited to understated interior schemes. The bed frame sits at a relaxed low height, with open clearance beneath the frame and no built-in under-bed storage compartments. Constructed from solid light oak wood for its headboard panels, footboard, square support legs, and side rails, the frame uses a combination of doweled and screwed joinery for structural stability. Mattress support is provided by smoothly sanded solid pine slats, reinforced by a solid pine center rail and matching center support leg, eliminating the need for a separate box spring. All wood surfaces are coated in a matte clear UV lacquer with low VOC content, while hardware consists of zinc-plated steel bolts and dowel pins. Nightstand drawer fronts cut from matching solid oak coordinate seamlessly with the bed, and the set is delivered as knock-down flat pack units with all required assembly hardware included. Adjustable leveling feet accommodate uneven floor surfaces, and the slatted base provides consistent mattress support. The nightstands offer stable open-top storage and smooth-operating drawers for bedside essentials. This set is ideally suited for residential master bedrooms designed around Nordic or Japanese minimalist aesthetics, and works equally well in small secondary bedrooms, long-term rental apartments, and short-term Airbnb properties. It is designed for adult users who prefer natural wood furniture without upholstered surfaces, and coordinates seamlessly with light neutral bedding, blue or earth-tone wall finishes, and sheer window treatments. It is compatible with wood, laminate, tile, and low-pile carpet flooring. When procuring this set, note that a 250 mm thick foam or hybrid mattress is recommended for ideal fit and comfort, and the package includes two matching nightstands to complete the suite. Buyers should account for assembly time per set, and note that the set ships across multiple cartons. No under-bed storage is integrated into the frame, so purchasers seeking built-in below-bed storage will need to plan for separate organizational solutions. The fixed headboard design requires appropriate wall clearance during placement, and the low-profile form pairs best with the specified mattress thickness to maintain its intended visual proportion.

Minimalist Light Oak Solid Wood Platform Bed Frame with Matching Nightstands Specifications

供应商与现货