This unbranded light wood upholstered storage platform bed, model SPB-LW1820-UHS-4D, features a clean Nordic-inspired silhouette designed for balanced function and understated visual warmth. The frame is finished in a light natural clear coat that highlights the wood grain, paired with a tall off-white upholstered padded headboard that sits flush against the wall. The low-profile footboard sits 450 mm high with no protruding rail, reducing risk of leg bumps during bed making, while a 120 mm deep integrated shelf spans the top of the headboard. Three recessed open compartments run along the front of the footboard for accessible display or small item storage, and four side-mounted pull-out drawers (two per long side) sit flush with the frame for a streamlined look. The overall frame measures 1980 x 2250 x 1150 mm, with a sleep surface height of 400 mm at the top of the slats, sized to fit an 1800 x 2000 mm mattress. The main bed frame structure is built from solid rubber wood with a light natural clear finish. The headboard is upholstered in wear-resistant linen-blend polyester fabric, padded with 35 mm high-resilience polyurethane foam for soft back support when sitting upright. The mattress support base uses 28 solid pine wood slats fitted with EVA anti-noise pads, reinforced by a full-length central rail with three support legs, eliminating the need for a separate box spring. Each drawer is constructed from 15 mm thick E0-grade MDF with wood veneer, mounted on 3-section cold-rolled steel ball-bearing slides, with 900 x 550 x 280 mm of internal space per drawer, delivering 560 L of total internal storage. The headboard shelf is finished with matte clear lacquer on solid wood, with a pre-cut cable routing cutout for charging cords. Non-slip TPE rubber foot pads protect flooring, and assembly uses zinc-plated cam lock bolts and wood screws, with an included Allen key supporting 40-minute assembly per set. The frame supports a total static load of 450 kg for frame and mattress combined, and is compatible with all spring, memory foam, or hybrid mattresses 250 mm thick. This bed is designed for residential master bedrooms, suited to Nordic, minimalist, Japanese, or light modern interior schemes. It requires a minimum bedroom area of 12 ㎡, and pairs naturally with matching two-drawer solid wood nightstands placed on either side. When procuring, note the product ships across two cartons, with a total packaged gross weight of 130 kg per set, and net assembled weight of 95 kg. No additional box spring purchase is required, and the low footboard design accommodates easier movement around the bed perimeter without obstruction.