纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1870 × 2070 × 900 mm
Overall footprint (king-compatible 1.8m size)	1870 x 2070 x 900 mm
Headboard height from floor	900 mm
Headboard panel thickness	65 mm
Footboard height from floor	400 mm
Platform slat surface height from floor	400 mm
Bed leg height	120 mm
Individual support slat thickness	25 mm
Slat spacing (gap between adjacent slats)	50 mm
Total support slat count	28 pieces
Center support beam count	2 pieces
Single storage drawer internal dimensions	900 x 580 x 200 mm
Under-bed floor clearance below drawer cavities	20 mm
Under-bed knee clearance for drawer access	400 mm
Side Rail Thickness	40 mm
Slat Spacing	80 mm
Center Support Leg Count	Recommended 6legs

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total static load capacity (mattress + users)	500 kg
Net weight (frame only, no mattress)	110 kg
Recommended maximum mattress thickness	300 mm
Standard compatible mattress size	1800 x 2000 mm
Recommended user count	2 adults
Finish abrasion resistance (Taber test)	1000 cycles
Wood moisture content	12%
Bed Static Load Reference	400 kg
Per-slat Load Reference	60 kg
Recommended Procurement Warranty	Frame 10 years; hardware 5 years; upholstery 2 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Headboard panel	Solid kiln-dried beech wood, clear natural low-VOC matte finish
Side rails and footboard	Solid beech wood frame, mortise-and-tenon joinery
Support slats	Solid beech wood, planed smooth, no sharp edges
Center support beams	Solid beech wood, screwed to side rails for rigidity
Storage drawer boxes	Solid poplar wood, English dovetail joinery at corners
Drawer glides	Waxed solid wood glides with integrated safety stops
Recessed drawer pulls	Integrated solid wood routed pulls, no separate metal hardware
Bed legs	Solid tapered beech wood, floor protection pads fitted at base
Frame hardware	Zinc-plated steel connector bolts and barrel nuts
Surface finish	Low-VOC water-based clear wood sealer, natural light beech tone
Slat Thickness	15 mm bent plywood or solid timber
Primary Connector Specification	Reference M8-M10 bolts with at least 2 fixing points per corner

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Under-bed storage configuration	4 total pull-out drawers, 2 per long side of bed
Drawer operation	Side-pull drawers on waxed wood glides, full extension access
Mattress support function	Closely spaced solid wood slats eliminate need for box spring
Assembly structure	Knock-down flat-pack design, bolted joinery for on-site assembly
Headboard function	Fixed solid panel provides back support for seated reading, no adjustable positions
Floor protection function	Felt pads fitted to all leg bases prevent floor scuffing on hard surfaces
Storage access clearance	Drawers extend fully to expose entire internal cavity without blocking walkways
Ventilation function	Even gaps between slats promote air circulation under mattress to reduce mildew
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2300× 900× 450 mm/carton in 4 cartons
Reference Packaged Gross Weight	130 kg/set
Reference Packaging Volume	0.9 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Primary application space	Master bedrooms, guest bedrooms, and small to medium-sized residential apartments
Recommended matching furniture	Matching 2-drawer solid wood nightstands, low-profile latex or spring mattresses up to 300mm thick
Floor type compatibility	Suitable for carpet, tile, laminate, and solid hardwood floors with fitted leg felt pads
Style compatibility	Fits Scandinavian, minimalist, Japanese-style, and natural wood casual interior design themes
Storage use case	Stores folded linens, seasonal clothing, bedding accessories, and small personal items out of sight

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1725:1998 Furniture - Beds and mattresses - Safety requirements and test methods	Applies to structural stability, edge safety, and entrapment prevention for residential bed frames
EN 747-1:2012 Furniture - Bunk beds and high beds - Part 1: Safety, strength and durability requirements	Referenced for frame strength and fastener performance testing parameters for adult beds

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017 General technical requirements for wooden furniture	Applies to dimensional tolerance, joinery strength, and finish quality for residential wooden beds
GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture	Applies to formaldehyde and heavy metal emission limits for wood components and finishes
GB/T 13666-2019 Beds for household use	Applies to structural safety, stability, and load capacity requirements for residential bed frames

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017 General technical requirements for wooden furniture：Applies to dimensional tolerance, joinery strength, and finish quality for residential wooden beds；
2. GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture：Applies to formaldehyde and heavy metal emission limits for wood components and finishes；
3. GB/T 13666-2019 Beds for household use：Applies to structural safety, stability, and load capacity requirements for residential bed frames；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · SW-PB-4D-1800

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · SW-PB-4D-1800

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · SW-PB-4D-1800打开导出工具

页面快速操作

发布采购询价

产品描述

This solid wood storage platform bed carries a clean, minimalist profile defined by light natural wood tones and balanced, low-profile proportions. The fixed solid-panel headboard rises to a comfortable seated back support height, paired with a lower footboard that keeps sight lines open across the room. Four full-extension pull-out drawers are positioned two per long side of the frame, integrated seamlessly into the base without disrupting the bed’s streamlined silhouette, with recessed routed pulls that eliminate protruding hardware for a smooth, unbroken visual finish. The bed is built around a solid kiln-dried beech wood frame, with mortise-and-tenon joinery used for side rails and footboard, and zinc-plated steel connector bolts and barrel nuts for rigid, secure assembly. The mattress support system uses smooth, edge-free solid beech slats reinforced by central screwed support beams, removing the need for a separate box spring. Storage drawers are crafted from solid poplar with English dovetail corner joinery, riding on waxed solid wood glides fitted with integrated safety stops. Tapered solid beech legs are fitted with felt floor protection pads, and all wood surfaces are coated in a low-VOC clear natural matte finish. The frame uses a knock-down flat-pack design for straightforward on-site setup. Practically, the bed provides discreet, accessible under-bed storage for folded linens, seasonal clothing, bedding accessories and small personal items, with drawers that extend fully to expose their entire internal cavity without blocking adjacent walkways. The fixed headboard offers stable back support for seated reading, while the slatted base supports direct mattress placement, and the leg pads prevent scuffing across carpet, tile, laminate and solid hardwood flooring. It is sized to fit a standard 1800 x 2000 mm mattress, and accommodates two adult users with a total static load capacity for mattress and occupants of 500 kg. This bed is well suited for master bedrooms, guest bedrooms, and small to medium-sized residential apartments, complementing Scandinavian, minimalist, Japanese-style and casual natural wood interior schemes. It pairs cohesively with matching solid wood 2-drawer nightstands and low-profile latex or spring mattresses of appropriate thickness. For procurement, note that the unit ships across multiple cartons, requires on-site assembly, and works best with mattresses aligned to the specified compatible size and thickness to preserve intended function and aesthetic proportion.

Light Natural Solid Wood Slatted Storage Platform Bed with 4 Under-Bed Drawers Specifications

供应商与现货