基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源:工厂资料结构化字段,最终以实测值为准
| 产品外部尺寸(宽 × 深 × 高) | 1890 × 2160 × 1030 mm | |
|---|---|---|
| compatible mattress size | 1800 x 2000 mm | |
| sleeping surface height | 460 mm | |
| headboard shelf depth | 150 mm | |
| headboard total height | 1030 mm | |
| footboard height | 310 mm | |
| footboard open slot height | 200 mm | |
| under-bed floor clearance | 20 mm | |
| slat width | 70 mm | |
| slat spacing | 75 mm | |
| Side Rail Thickness | 40 mm | |
| Center Support Leg Count | Recommended 6legs |
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源:产品性能数据,采购前请核对具体测试口径
| total static load capacity | 272 kg | |
|---|---|---|
| bed frame net weight | 114 kg | |
| recommended mattress thickness | 254 mm | |
| expected service life | 10 years | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源:以工厂材质清单与验货报告为准
| headboard panel | Solid rubberwood, 25mm thick, rounded edges, matte clear finish | |
|---|---|---|
| side/foot rails | Solid rubberwood, 30mm thick, rounded corners, matching finish | |
| support slats | Solid pine plywood, 18mm thick, sanded smooth | |
| center support rail | Solid hardwood, 40mm thick, runs full length of bed | |
| support legs | Solid wood tapered legs, 50mm diameter, floor-protective pads | |
| hardware connectors | Zinc-plated steel bolts, dowels, and cam locks | |
| surface finish | Low-VOC matte clear lacquer, 0.1mm coating thickness | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源:功能配置参数,以供应商正式规格为准
| headboard storage shelf | Continuous recessed top shelf along full headboard width for books, clocks, small decor | |
|---|---|---|
| footboard book slots | Two open recessed slots in footboard panel for vertical book/magazine storage | |
| slat support system | 14 slats spaced 75mm apart with 1 center support rail, no box spring required | |
| rounded edge safety design | All exposed frame corners rounded to 10mm radius to prevent impact injury | |
| floor protection | All support legs fitted with non-marking felt pads to prevent floor scratching | |
| flat-pack assembly | Ships disassembled with all hardware and hex key included for two-person assembly | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源:外贸报价与装柜测算参考
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源:依据产品结构与品类整理的推荐应用场景
| primary use space | Residential master or guest bedrooms, for adult double sleeping | |
|---|---|---|
| target user | Users preferring nordic/minimalist style, needing bedside open storage | |
| recommended configuration | Pair with matching 1-drawer open-shelf nightstands on both sides | |
| mattress compatibility | Works with memory foam, latex, or spring mattresses up to 254mm thick | |
| style suitability | Fits scandinavian, modern minimalist, and japanese-inspired interior designs | |
| installation note | Requires 100mm clearance from wall to access headboard shelf fully |
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
| EN 1725:1998 | Domestic furniture - Beds and mattresses - Safety requirements and test methods | |
|---|---|---|
| EN 12520:2015 | Furniture - Strength, durability and safety - Requirements for domestic seating (applicable for edge safety) |
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional stability and finish quality | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable for formaldehyde emission control |
本产品须满足以下技术参数要求: 1. GB/T 3324-2017:General technical requirements for wooden furniture, applicable for dimensional stability and finish quality; 2. GB 18584-2001:Limit of harmful substances in wooden furniture, applicable for formaldehyde emission control; 最终交付参数、检测报告和验收标准以双方采购合同为准。
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告,可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块,文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段,可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具