The Mustard Upholstered Low-Profile King Platform Bed is a modern upholstered platform bed with a relaxed, low-slung silhouette and a warm mustard woven exterior. Its most prominent feature is the four-section headboard, arranged as two upper loose padded cushions above two fixed lower padded panels. The upholstered side and foot rails continue the padded treatment around the sleeping area, creating a soft, tailored envelope while helping to limit mattress movement. Dark bronze metal legs and a perimeter steel frame provide a restrained contrast to the mustard fabric and reinforce the bed’s contemporary character. The overall footprint is 2304 x 2060 x 1100 mm, with a 320 mm platform support height measured from the floor to the top of the slat deck. Construction combines an engineered-wood or plywood headboard substrate, padded rails, a rectangular engineered-wood center beam, bent laminated beech or birch slats, and dark bronze powder-coated square steel tube for the legs and perimeter base. Upper headboard cushions use 38 kg/m3 polyurethane foam, while the rails use high-resilience polyurethane foam bonded to the frame. The upholstery is mustard polyester woven fabric at a nominal 320 g/m2. Plywood or hardwood corner blocks and M8 connector hardware support the knock-down rail connections. Fourteen wood slats support a mattress directly, removing the need for a box spring. A longitudinal center beam with three floor legs divides the mattress area into reinforced support zones, and the full floor-contact system uses four corner legs plus three center legs. The bed is rated for two adults, with a static load capacity of 363 kg and a recommended mattress weight of 55 kg. Surrounding 300 mm rails help retain the mattress, and the 120 mm open clearance beneath the frame allows robot vacuum access and limited under-bed cleaning. This model suits residential king or super-king bedrooms that call for a low upholstered frame and soft backrest, as well as boutique hotel guest rooms, turn-key apartment furnishing projects, showrooms, and model homes. It is also well suited to modern bedrooms using automated floor cleaning. For a clean tailored profile, it can be paired with a 200 mm mattress for a 520 mm sleeping surface height. Procurement teams should plan for two-person handling and on-site assembly, with a reference assembly time of 40 minutes per set. The listed logistics reference indicates two cartons per set, while the packaging data also records a four-carton reference configuration; packaging details should therefore be confirmed before shipment planning. The packaged gross weight reference is 130 kg per set and the net bed frame weight is 58 kg. Buyers should verify room circulation, doorway access, mattress interface dimensions, and final delivery packaging with the supplier before ordering.