The Upholstered Low-Profile Platform Bed with Two-Panel Headboard presents a calm modern silhouette for residential and hospitality interiors. Its light gray padded headboard features a formed panel with a central two-panel seam, while matching padded upholstery covers the exposed side and foot rails. Four visible black powder-coated cylindrical metal legs give the frame a slim, elevated profile, and the low stance keeps floor area visually open. Overall dimensions are 1800 by 2200 by 1000 mm, designed around an 1800 mm queen mattress and two adult sleepers. A 250 mm mattress thickness is recommended, with a maximum mattress weight of 55 kg. Construction combines soft upholstered surfaces with a structured support system. The internal frame uses kiln-dried timber or engineered-wood framing with reinforced corner blocks, set within a padded panel bed frame. Headboard padding is 2.2 pcf polyurethane foam at 38 ILD firmness, and rail padding is 1.8 pcf polyurethane foam wrapped over the wood rail. The exterior is offered in woven fabric or a synthetic leather look with a matte light gray finish. Beneath the bed, an engineered wood or plywood slat support platform sits within the upholstered frame, with 80 mm slat spacing, 40 mm side rails, and a steel or hardwood longitudinal center support rail. Four outer metal legs and six recommended center support legs help resist platform deflection. The frame has a recommended static load of 300 kg, with each slat support point rated at 35 kg, and fastener joints are rated for 50,000 simulated use cycles. The rigid platform supports a mattress without a box spring, while upholstered side and end rails help retain it in position. The floor-standing padded headboard offers back support and protects the wall behind pillows. A 120 mm open clearance encourages air movement and allows limited low-profile storage access, and separate foot caps isolate the metal legs from carpet or hard flooring. The bed ships knockdown, with the headboard, side rails, foot rail, platform supports, and legs joined using bolted hardware. Planning data lists 60 minutes for two installers, with reference logistics of two cartons per set, 130 kg packaged gross weight, and 0.9 cubic meter packaging volume; separate reference packing information lists four cartons measuring 2300 by 900 by 450 mm each, so packaging details should be confirmed at order stage. This bed suits modern main bedrooms, boutique hotel guest rooms, serviced apartments, and dark-tone minimalist interiors. It can be coordinated with a low gray nightstand with black legs. For developer or residential project procurement, validate fabric grade, foam density, load testing, and carton data before bulk release.