The Charcoal Upholstered Soft-Back Bed with Slim Metal Legs is an unbranded platform bed offering a restrained modern focal point for residential and selected hospitality interiors. Designed for an 1800 x 2000 mm mattress and two adults, it pairs charcoal woven-look upholstery with a tall padded headboard, low-profile foot rail, and slender silver-finish legs. Its overall dimensions are 1980 x 2220 x 1050 mm, with a 1050 mm headboard and a 420 mm foot rail that help balance visual presence with a compact, contemporary footprint. Its clean silhouette complements concrete, white, gray, wood, and monochrome interiors, while white, light gray, charcoal, or textured bedding can soften or sharpen the look as required. Visually, the bed features a wing-style upholstered headboard with two independently shaped padded cushions. Recessed diagonal seam detail adds definition without introducing ornament, and the cushions extend across the full 1980 mm width. Matching charcoal upholstery carries through the side and foot rails, creating a coordinated frame, while the slim silver legs lift the form and reveal a 120 mm under-bed clearance. This elevation supports robotic vacuum access and limited air circulation beneath the bed. Construction combines upholstered engineered-wood side and foot rails with a plywood or engineered-wood support structure and a 25 mm internal support board. The rails include 15 mm polyurethane padding beneath the outer layer, while the headboard uses 35 kg/m3 polyurethane foam with an 80 mm fiber-topped filling for a soft-back feel. Flexible timber or composite slats at 28 mm width rest on a central longitudinal rail, with a layout of four corner legs and recommended six center support legs. The slim metal legs have a 32 mm upper diameter and small floor-contact feet that reduce concentrated loading. Joint hardware consists of carbon-steel bolts, barrel nuts, and corner brackets with black oxide or zinc plating. Functionally, the padded cushions provide upright support for reading or tablet use, and the upholstered side and foot rails help retain the mattress on the internal platform. A 260 mm mattress thickness is recommended, with a recommended mattress weight of 55 kg. The static bed-frame load is rated at 350 kg, and the slat system distributed load is 180 kg. Knock-down bolted assembly connects the headboard, rails, slats, and legs, with a reference assembly time of 40 minutes per set. The bed is well suited to main bedrooms, contemporary homes, serviced apartments, guest suites, and compact luxury bedrooms where hotel-like comfort is desired without a heavy visual profile. Procurement planning should account for a 72 kg net bed weight, 130 kg packaged gross weight, multi-carton delivery, and the need to verify package configuration, stair or elevator access, room dimensions, and compatible mattress specifications before installation.