The Upholstered Storage Bed with Two-Drawer Nightstand presents a coordinated modern bedroom solution defined by clean lines, a soft taupe palette, and integrated organization. The bed features a padded headboard with two horizontal cushion rows and center vertical seams, while matching taupe upholstered side and foot panels finish the platform with stitched rounded corners. Its low, rectangular profile creates a calm, minimalist focal point, complemented by the light beige two-drawer nightstand and its dark brown wood-look top. One nightstand is included in the set, and matching units can be placed on one or both sides for a symmetrical layout. Construction balances comfort with structural support. The frame uses engineered wood load-bearing panels with an 18 mm nominal thickness, reinforced by a powder-coated steel lift frame and perimeter rail in a 25 by 25 mm nominal section. Six center support legs are recommended. Bentwood or plywood slats, each 55 mm wide and 12 mm thick, are spaced 80 mm apart, and the side rails are 40 mm thick. The nightstand combines a light beige engineered-wood drawer cabinet with a 30 mm dark brown laminated or veneered top, fitted with side-mounted ball-bearing slides and handle-recess drawer fronts. A foot-side pull handle releases the hinged mattress platform, which lifts toward the headboard. Two gas pistons, one on each side, balance the platform and mattress through a 65-degree maximum opening angle and lock when fully open; closing is controlled rather than free-falling. The full-width under-mattress compartment provides 0.72 cubic meters of storage for seasonal bedding and luggage. The slatted base supports a 1800 by 2000 mm mattress without a box spring, and the padded headboard offers a comfortable surface for seated reading while protecting pillows. The nightstand’s two stacked drawers help separate personal items from books, chargers, and bedside accessories. This set suits adult users in master bedrooms, small apartments, hotels, and serviced apartments, especially where two guests need a neutral, organized room. Its coordinated appearance also works for contemporary showroom displays. The bed is intended for two adults, with a 400 kg static load capacity and a 60 kg per-slat load reference. Procurement planning should account for an unbranded product, model BED-US-KH-1800-STG, packaged at 130 kg gross weight and 0.9 cubic meters per set, with a reference assembly time of 40 minutes. Warranty coverage is 10 years for the frame, 5 years for hardware, and 2 years for upholstery.