基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源:工厂资料结构化字段,最终以实测值为准
| 产品外部尺寸(宽 × 深 × 高) | 2400 × 2000 × 750 mm | |
|---|---|---|
| Overall footprint | 2400 x 2000 x 750 mm | |
| Finished Top Thickness | 50 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源:产品性能数据,采购前请核对具体测试口径
| Net weight | 145 kg | |
|---|---|---|
| Distributed desktop load | 80 kg | |
| Pedestal top load | 40 kg | |
| Drawer or shelf load per level | 20 kg | |
| Recommended user size | 1 person | |
| Seating clearance | 1200 mm knee width and 680 mm knee height | |
| Panel screw pull-out resistance | 120 N minimum | |
| Desktop surface impact rating | 18 N drop-ball test with no through-crack | |
| Edge durability | No delamination after 100000 edge-contact cycles | |
| Top Static Load Reference | 150 kg uniformly distributed |
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源:以工厂材质清单与验货报告为准
| Desktop substrate and finish | 25 mm wood-composite board with dark wood-grain laminate and sealed edge banding | |
|---|---|---|
| Top edge profile | 50 mm thick built-up edge with dark protective edge banding | |
| Central work surface | Black leather-look or polymer writing mat recessed into the desktop | |
| Cabinet panels | 18 mm gray melamine-faced wood-composite panels with matching edge banding | |
| Modesty panel | Gray vertical fluted panel mounted below the desktop rail | |
| Structural hardware | Powder-coated steel cam connectors, hinges, drawer runners, and floor levelers |
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源:功能配置参数,以供应商正式规格为准
| Primary computer workstation | 2400 mm main work surface supports a laptop or dual-monitor setup with a 1200 x 500 mm central writing mat | |
|---|---|---|
| Right side return and storage pedestal | Fixed right-hand return creates an L-shaped work area with a 700 mm floor-supported storage cabinet | |
| Cable management | Round 80 mm grommet and adjacent rectangular access plate route power and data cables from the top toward the under-desk zone | |
| Seated privacy and leg screening | 1200 mm fluted modesty panel covers the front knee bay while leaving a 680 mm high seated opening |
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源:外贸报价与装柜测算参考
| Total packed volume | 0.72 CBM | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | Main top 2500× 1050× 350 mm; return/pedestal packed separately | |
| Reference Packaged Gross Weight | 180 kg/set in 4 cartons | |
| Reference Packaging Volume | 1 m³/set |
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源:依据产品结构与品类整理的推荐应用场景
| Private executive office | Large L-shaped layout supports laptop work, documents, meetings, and right-side storage in a manager or director room | |
|---|---|---|
| Senior administrative workstation | Suitable for users needing extended work surface, cable access, and enclosed filing storage within one fixed workstation |
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
| EN 527-1:2011 | Defines safety, strength, and dimensional requirements for office work tables including seated work height and stability | |
|---|---|---|
| EN 527-2:2003 | Provides mechanical safety and test methods for office desks, including vertical and horizontal loading | |
| EN 15372:2016 | Specifies strength, durability, and stability requirements for non-domestic storage furniture | |
| EN 717-1:2004 | Covers formaldehyde emission determination for wood-based panels |
北美市场采购验货参考 * ANSI/BIFMA 标准
美国及加拿大家具标准
| ANSI/BIFMA X5.5-2021 | Applicable standards and test results require confirmation | |
|---|---|---|
| ANSI/BIFMA X5.9-2019 | Storage units structural performance and safety reference for drawers, doors, and case components |
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
| GB/T 3324-2017 | Applies to dimensional tolerances, materials, finish, stability, and structural inspection of wooden furniture | |
|---|---|---|
| GB/T 3325-2017 | Applies to metal furniture structural and surface-quality requirements where metal supports or hardware are used | |
| GB 18580-2017 | Applies to formaldehyde emission limits for wood-based panels used in the desk | |
| GB/T 10357.5-2011 | Applies to furniture strength and durability test methods for cabinets and tables | |
| GB/T 4893.1-2021 | Applies to surface resistance tests for furniture coatings and laminated surfaces |
本产品须满足以下技术参数要求: 1. GB/T 3324-2017:Applies to dimensional tolerances, materials, finish, stability, and structural inspection of wooden furniture; 2. GB/T 3325-2017:Applies to metal furniture structural and surface-quality requirements where metal supports or hardware are used; 3. GB 18580-2017:Applies to formaldehyde emission limits for wood-based panels used in the desk; 4. GB/T 10357.5-2011:Applies to furniture strength and durability test methods for cabinets and tables; 5. GB/T 4893.1-2021:Applies to surface resistance tests for furniture coatings and laminated surfaces; 最终交付参数、检测报告和验收标准以双方采购合同为准。
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告,可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块,文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段,可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具