纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1500 × 1350 × 470 mm
Marble inlay section size	900 x 750 mm
Metal tabletop thickness	12 mm
Marble top thickness	20 mm
Pedestal base diameter	450 mm
Floor clearance under tabletop	420 mm
Tabletop edge radius	80 mm
Overlap between marble and metal sections	250 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Static distributed tabletop load capacity	100 kg
Net product weight	68 kg
Base finish abrasion resistance	2000 cycles
Marble surface stain resistance (sealed)	Class B
Recommended seating capacity for adjacent use	4 people
Adjustable foot leveler adjustment range	10 mm
Limited warranty period	1 year
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Main tabletop panel	12mm brushed brass-finished carbon steel with clear anti-tarnish lacquer
Overlapping inlay panel	20mm polished natural gray-veined marble with high-gloss UV sealant
Pedestal base	3mm wall-thickness cylindrical steel tube with brushed bronze powder coat
Tabletop connection hardware	M10 zinc-plated steel bolts with reinforced steel mounting plates
Base bottom levelers	Nylon-tipped adjustable steel glides to protect floor surfaces
Marble edge finish	Hand-polished eased edges matching top surface gloss
Metal top edge finish	Deburred rounded edges to eliminate sharp corners
Anti-slip connection pads	EVA foam pads between marble and metal top to prevent scratching
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Structure type	Fixed non-adjustable single central pedestal support for unobstructed leg room
Leveling adjustment	Rotating bottom glides compensate for uneven floor surfaces up to 10mm
Surface use	Dual-finish top supports display items, beverage service and lounge room storage use
Finish protection	Anti-tarnish lacquer on brass surfaces resists fingerprint marks and mild oxidation
Assembly requirement	Semi-knocked-down assembly requiring attachment of tabletop to pedestal base with included hardware
Surface care	Wipe-clean surfaces require immediate spill removal on marble to prevent permanent staining
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential living room	Center placement in front of sofas for decorative display and beverage service
Luxury lounge waiting area	Use in high-end hotel or office reception lounge spaces as a sculptural accent piece
Contemporary open-plan living space	Pair with modular low-profile seating for minimalist modern interior schemes
Residential showroom display	Use as a feature piece in furniture showrooms to showcase mixed-material design
Private club lounge area	Placement in VIP lounge zones to complement high-end soft seating arrangements

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Safety, strength and durability requirements for residential dining and lounge tables
EN 15372:2008+A1:2016	Requirements for surface resistance to cold liquids, abrasion and heat for furniture tops
EN 1022:2019	Stability testing standard for upright domestic seating and tables

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden and stone residential furniture, applicable to table structural safety
GB 18584-2001	Limit of harmful substances in furniture, applicable to formaldehyde and heavy metal content limits
GB/T 4897.3-2015	Performance requirements for particleboard used in furniture structural components if applicable

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden and stone residential furniture, applicable to table structural safety；
2. GB 18584-2001：Limit of harmful substances in furniture, applicable to formaldehyde and heavy metal content limits；
3. GB/T 4897.3-2015：Performance requirements for particleboard used in furniture structural components if applicable；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CT-ASYMM-BRASS-MBL-001

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CT-ASYMM-BRASS-MBL-001

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CT-ASYMM-BRASS-MBL-001打开导出工具

页面快速操作

发布采购询价

产品描述

The Asymmetric Overlapping Marble and Brushed Brass Pedestal Coffee Table, model CT-ASYMM-BRASS-MBL-001, is an unbranded sculptural modern occasional table defined by its striking dual-material, asymmetric design. Its tabletop features two overlapping panels: a 12mm thick brushed brass-finished carbon steel panel coated with clear anti-tarnish lacquer, and a 20mm thick polished natural gray-veined marble panel sealed with high-gloss UV protectant, with a 250mm overlap between sections. All edges are shaped to a soft 80mm radius, with the marble featuring hand-polished eased edges that match the surface’s high gloss, and metal edges deburred to eliminate sharp corners. EVA foam pads sit between the two panels to prevent scratching between surfaces. The entire top is supported by a fixed central cylindrical steel pedestal base with a 450mm diameter, finished in brushed bronze powder coat, secured to the tabletop with M10 zinc-plated steel bolts and reinforced mounting plates. Nylon-tipped adjustable steel glides at the base protect floor surfaces, with 10mm of adjustment to compensate for uneven floors, and 420mm of clearance beneath the tabletop creates entirely unobstructed leg room for users. The table holds a 100kg static distributed load across its top, supporting decorative display, beverage service, and casual lounge storage, with built-in cable management that holds up to 10 power or data cables on a tray rated for 10kg of load. The anti-tarnish lacquer on brass surfaces resists fingerprints and mild oxidation, while the sealed marble carries a Class B stain resistance rating, requiring immediate spill removal to avoid permanent discoloration. The base finish offers 2000 cycles of abrasion resistance, and the unit comes with a 1-year limited warranty. Sized for use adjacent to seating for 4 people, the table fits residential living rooms as a central sofa-front piece, luxury hotel and office reception lounges as a sculptural accent, contemporary open-plan living spaces paired with low-profile modular seating, furniture showrooms as a mixed-material design feature, and private VIP club lounges complementing high-end soft seating. Procurement teams should note the product ships semi-knocked down in 2 cartons per set, with a 40-minute assembly time using included hardware, 68kg net weight, and 90kg packaged gross weight. The sealed marble surface requires routine gentle cleaning, and no extended customizations or third-party certifications are listed for this unbranded model.

Asymmetric Overlapping Marble and Brushed Brass Pedestal Coffee Table Specifications

供应商与现货