The Cognac Two-Tone Wraparound Leather Dining Armchair, model DC-WL-630, is an unbranded leather-upholstered dining armchair defined by its streamlined monolithic wraparound shell design. Its two-tone finish pairs dark brown outer shell panels with warm cognac seating and inner back surfaces, supported by four fixed splayed tapered hardwood legs finished in a dark walnut tone that complements the outer leather, for a cohesive, refined silhouette. Its load-bearing structure is built from 25 mm thick kiln-dried solid beech hardwood, with corner-blocked, double-doweled joints rated for heavy static load; both the seat and backrest are reinforced with 14 mm thick bent plywood support structures, overlaid with 50 mm wide elastic webbing spaced 80 mm apart beneath padding layers. Seating surfaces are cushioned with 40 mm thick 45 kg/m³ high-density polyurethane foam wrapped in a 10 mm soft Dacron layer, upholstered in 1.4 mm thick full-grain saddle leather stitched with bonded nylon thread at an 8 mm seam pitch, with finished edge binding along all shell seams. Tapered legs have a 30 mm square section at the floor, fitted with 8 mm thick non-marking nylon glides, and a 45 mm wide taper at the top section. The chair features a fixed 100-degree upright backrest angle with an integrated lumbar curve to support proper dining posture, plus continuous wraparound armrests aligned to table height for comfortable forearm support. The 154 kg static weight capacity and 50,000 Martindale cycle abrasion resistance of the leather support up to 8 hours of daily use; the full-grain leather develops a natural patina over time without structural breakdown. Non-marking glides prevent scratches on hard flooring and low-pile carpet, while the 600 mm wide leg stance delivers reliable tip resistance during regular use. Assembly requires only minimal leg and glide attachment with included Allen wrench hardware, taking roughly 40 minutes per unit. Overall dimensions measure 630 x 670 x 930 mm, with a 500 mm dining-height seat, 530 mm seat width, 510 mm seat depth, 430 mm backrest height above the seat, 584 mm armrest height from the floor, and 470 mm under-seat knee clearance. Each chair weighs 26 kg, and ships across two cartons per set with a total packaged gross weight of 23 kg and 0.26 m³ total carton volume. This chair suits a broad range of spaces: it pairs seamlessly with 760 mm high dining tables in residential dining rooms, fits standard kitchen island overhangs for open-plan casual dining, serves as durable high-turnover seating for cafes and bistros, works as compact upright guest seating in home offices, and complements modern luxury design schemes in boutique hotel guest rooms. For procurement, note that 135 sets fit in a 20GP container at 85% space utilization, and units are delivered unbranded with no pre-attached legs, requiring straightforward on-site assembly before placement.