The Mid-Century Walnut Bentwood Upholstered Dining Armchair, Burgundy Faux Leather (model DC-BW-RED-001, unbranded) is a public and residential seating solution defined by its refined retro-modern visual language. Its form follows classic mid-century silhouettes, with smooth, continuous bentwood framing that curves seamlessly from the integrated armrests into the back support, paired with straight, tapered solid wood legs finished in a warm walnut tone. The rich burgundy 1.0mm thick faux leather upholstery creates a striking, sophisticated contrast against the wood frame, with precise 3mm per stitch seam work lending a polished, tailored finish. Overall dimensions measure 600 x 520 x 790 mm, with a 450mm seat height aligned to standard table heights, creating a balanced, grounded layout when arranged around dining surfaces or workspaces. Constructed for long-term regular use, the chair features a walnut-veneered bentwood frame with a solid wood leg core, supported by a 20mm thick bentwood plywood seat rail and four straight solid walnut-toned hardwood legs with 30 x 30mm cross-sections. All legs are fitted with injection-molded nylon non-slip glides to protect floor surfaces, and the knocked-down flat-pack design uses zinc-plated steel hardware for secure assembly. The seat is padded with 80mm thick 40 kg/m³ high-resilience polyurethane foam with a 55% rebound rate, while the back uses medium-density polyurethane foam; both are wrapped in the durable burgundy PU upholstery rated for 50000 abrasion cycles. The frame supports a 250kg recommended static load, with load distributed evenly across four leg points each rated for 62.5kg via the attached glides. Designed for fixed upright support, the chair holds a 100-degree seat-to-back angle for comfortable, supported seating, with continuous bentwood armrests adding relaxed upper body support. The non-stackable frame requires spot cleaning for upholstery maintenance, and assembly takes 40 minutes per unit, shipped across two cartons with a total packaged weight of 23kg per set. This chair suits a broad range of settings: residential dining rooms paired with 750mm height standard dining tables, high-traffic hospitality spaces including cafes, restaurants, and hotel banquet areas, home office or study spaces for guest or short-duration task seating, mid-century modern interiors aligned with walnut wood and muted burgundy palettes, open-plan kitchen spaces at matching-height islands and breakfast bars, and commercial break rooms for durable employee lounge seating. Procurement teams should note the flat-pack shipping configuration, which allows 135 sets to fit a 20GP container at 85% space utilization, plan for on-site assembly, and account for the spot-clean only upholstery care requirement when specifying for high-use spaces.