纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	575 × 575 × 889 mm
Overall assembled dimensions	575 x 575 x 889 mm
Seat height from floor	505 mm
Seat pan depth	483 mm
Seat pan width at widest point	520 mm
Backrest total height above seat	384 mm
Leg taper length from seat ring to floor	470 mm
Under-seat circular support ring diameter	530 mm
Metal leg tube diameter	25 mm
Floor glide base diameter	30 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight per chair	11.3 kg
Maximum static user weight capacity	136 kg
Seat foam density	45 kg/m³
Seat foam rebound rate	45%
Seat padding thickness	80 mm
Backrest padding thickness	50 mm
Fabric abrasion resistance (Martindale)	30000 cycles
Frame static load capacity	272 kg
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat and inner back upholstery	Smooth matte beige woven polyester fabric
Outer back panel upholstery	Textured olive green diagonal-weave woven fabric
Seat and back padding	High-resilience polyurethane foam over plywood seat base
Under-seat support ring	1.5mm thick powder-coated dark bronze steel tube
Leg structure	1.2mm thick tapered cylindrical powder-coated dark bronze steel
Floor protection glides	Non-slip nylon adjustable foot pads
Upholstery stitching	Tonal matching thread with 8 stitches per inch seam pitch
Internal back frame	12mm thick bent plywood form
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating function	Fixed upright posture for dining use with no recline or tilt mechanism
Floor glide adjustment	10mm height adjustment per foot to level on uneven floors
Wraparound back support	Curved semi-enclosed back provides lateral torso support during table-side seating
Assembly requirement	Knock-down leg attachment with 4 included screws per chair
Surface protection	Soft nylon glides prevent scratches on hard flooring without requiring additional felt pads
Cleaning compatibility	Stain-repellent fabric finish suitable for wiping up food and drink spills
Stacking capability	Non-stacking fixed frame design for permanent table-side placement
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential dining room use	Pairs with standard 760 mm height dining tables for everyday family meals
Cafe and bistro seating	Compact footprint and durable fabric suitable for casual food service spaces
Home office guest seating	Provides comfortable side seating for visitors alongside desks or in meeting nooks
Restaurant dining areas	Stackable-alternative fixed seating for modern casual dining establishments
Vanity or dressing table seating	Appropriate seat height for standard vanity tables with supportive low back
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12520:2015 Furniture - Strength, durability and safety - Requirements for domestic seating	Applicable for residential dining chair structural safety and stability testing
EN 1022:2018 Furniture - Seating - Determination of stability	Applicable to verify no tipping under normal seated use loads

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1-2017 General Purpose Office Chairs - Backrest strength test	Reference standard for commercial-grade back support durability if used in cafeteria settings

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017 General technical requirements for wooden furniture	Applicable to plywood seat and back internal frame structural performance and finish quality
GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture	Applicable for formaldehyde emission limits on internal plywood components
GB/T 24821-2009 Furniture hardware - Requirements for strength and durability of chair legs	Applicable to steel leg and frame load testing requirements

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017 General technical requirements for wooden furniture：Applicable to plywood seat and back internal frame structural performance and finish quality；
2. GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture：Applicable for formaldehyde emission limits on internal plywood components；
3. GB/T 24821-2009 Furniture hardware - Requirements for strength and durability of chair legs：Applicable to steel leg and frame load testing requirements；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · DC-TT24-CURV-OLB

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · DC-TT24-CURV-OLB

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · DC-TT24-CURV-OLB打开导出工具

页面快速操作

发布采购询价

产品描述

This two-tone wraparound upholstered dining chair carries a modern minimalist silhouette defined by a curved, semi-enclosed back that wraps gently around the sitter to deliver lateral torso support during table-side use. The dual-tone upholstery creates subtle visual contrast, with smooth matte beige woven polyester covering the seat and inner back, while textured olive green diagonal-weave fabric clads the outer back panel. Tonal matching stitching, applied at a consistent 8 stitches per inch, lends a clean, tailored finish. Tapered powder-coated dark bronze steel legs connect to a circular under-seat support ring, forming a stable four-leg frame paired with non-slip nylon adjustable foot pads at each base.
The chair is built for lasting regular use, starting with a bent plywood internal frame and thick plywood seat support board. High-resilience polyurethane foam padding, at 80mm thickness for the seat and 50mm for the backrest, sits atop the support structure to deliver a firm, upright seating experience with no recline or tilt mechanism. The fabric carries a stain-repellent finish that simplifies wiping away food and drink spills, and the soft nylon glides prevent scratches on hard flooring without requiring additional felt pads. Each foot offers 10mm of height adjustment to keep the chair level on uneven floor surfaces. This is a fixed non-stacking design, intended for permanent table-side placement rather than compact storage.
The chair works seamlessly across both residential and light commercial spaces. In home settings, it pairs with standard-height dining tables for everyday family meals, fits standard vanity tables for dressing area use, and serves as comfortable guest seating in home offices or small meeting nooks. For commercial applications, its compact footprint and durable, abrasion-resistant fabric make it well suited to cafes, bistros, and modern casual dining restaurants.
For procurement planning, note that each chair ships knock-down for leg attachment, with four included screws per unit and a reference assembly time of 40 minutes per set, with each set packaged across two cartons. Teams sourcing for commercial fit-outs can reference the listed load capacity for standard 20-foot container shipments to plan bulk orders accurately. The fixed upright posture and durable build make it a consistent choice for high-turnover seating areas where long-term visual cohesion and reliable daily function are priorities.

Two-Tone Wraparound Upholstered Dining Chair with Dark Bronze Metal Legs Specifications

供应商与现货