The Dark Upholstered Armless Side Dining Chair with Nailhead Trim and Black Metal Legs (model DC-UPL-NVY-001) delivers a streamlined contemporary silhouette tailored for flexible seating across residential and light commercial settings. Its visual profile balances soft, tailored upholstery with crisp structural contrast: a fixed upright form framed by splayed matte black metal legs, accented by antique brass nailhead trim and subtle contrast light piping along upholstery edges that define its clean, tailored lines without excessive ornamentation. The armless profile creates a sleek, uncluttered look that integrates seamlessly with a range of interior design schemes. Construction prioritizes lasting durability and everyday comfort. The seat and back are wrapped in dark navy matte PU faux leather, with high-density 35 kg/m³ polyurethane foam padding at 80 mm seat cushion thickness, supported by 14 mm bent plywood or equivalent composite internal frames for both seat and backrest. Reinforced stitched seams with 8 mm stitch pitch secure upholstery, while the 1.2 mm thick powder-coated matte black steel tube legs (25 mm diameter) form a stable splayed four-leg base with 560 mm outer spread footprint. Non-marking polyethylene glides cap each leg to protect flooring, and the antique brass nailhead trim doubles as edge reinforcement to prevent upholstery fraying during regular use. Functional design supports consistent daily use, with a static weight capacity of 136 kg, 125-degree back angle, and foam that offers a 45% rebound rate to maintain comfort over 8 hours of recommended daily use. The smooth faux leather surface wipes clean easily with mild detergent, while the armless form allows the chair to tuck fully under standard 760 mm dining tables to save unused floor space. The glides enable smooth repositioning without scratching hard wood, tile, or low-pile carpet surfaces. This chair is suited for home kitchens and dining rooms, cafe and bistro seating, co-working breakout areas, office reception waiting zones, and bedroom vanity spaces aligned to matching table heights. For procurement, note that units ship as one set across two cartons, with 40 minutes of assembly required per set, 23 kg packaged gross weight, and 0.26 m³ carton volume supporting 135 sets loaded per 20GP container at 85% space utilization. For cohesive layouts, purchase in sets of 2, 4, or 6 to match standard dining table configurations. Overall dimensions measure 635 x 635 x 1016 mm, with 483 mm seat height, 516 mm seat width, 490 mm seat depth, and 533 mm backrest height above the seat. The upholstery carries a 30000-cycle abrasion resistance rating, with each leg rated for 45 kg static load to support stable long-term use.