The SLD-ORG-WHT-01 unbranded armless sled base side chair features a sleek modern minimalist two-tone aesthetic, pairing a vibrant matte molded orange seat with a frosted translucent white backrest set on a polished chrome cantilever sled frame. Smooth rounded molded edges soften the chair’s silhouette, while the streamlined armless profile creates a light, unobtrusive visual presence suited to coordinated open or compact layouts. It measures 635 x 572 x 953 mm overall, with a 457 mm seat height, 508 mm seat width and depth, and a 559 mm tall, 457 mm wide backrest, anchored by a sled base with 533 mm leg span and 546 mm front-to-back depth. Construction balances durability and comfort: the seat pan is molded from matte orange polypropylene over a 14 mm bent plywood internal support board, while the translucent white polycarbonate backrest is reinforced with a 14 mm bent plywood composite frame, mounted to the base via chrome-finished steel brackets. The frame is formed from chrome-plated cold-rolled steel rod, secured to the seat with zinc-plated steel screws, and fitted with injection-molded non-marking polypropylene floor glides. The unit weighs 6.4 kg, supports a 400 kg static load, and features surface finishes rated for 500 scratch resistance cycles, backrest impact resistance across 100 cycles, and 100 kg compression load per floor glide. Practical functionality supports flexible use: the continuous sled frame delivers subtle cantilever flex for seated comfort, with no swivel, tilt, height adjustment, or casters for stable fixed positioning. The armless form tucks fully under standard 720 mm high tables to reduce unused floor space, while non-marking glides prevent hard floor scuffs, and the rear frame sits flush against walls to avoid backrest contact damage. Molded plastic surfaces resist moisture and spills for simple wipe-clean maintenance, and up to 12 chairs stack vertically without auxiliary hardware for compact storage. This chair suits a wide range of spaces: residential dining rooms and compact apartment nooks, commercial cafes, office reception and break rooms, K-12 and higher education classrooms and assembly halls, temporary event and conference setups, and covered semi-outdoor patios with light moisture exposure. For procurement, note that each unit ships across 2 cartons with a total packaged weight of 23 kg and 0.26 m³ volume, requires 40 minutes of assembly per set, and 135 sets fit in a 20GP container at 85% space utilization, backed by a 2 year recommended warranty.