纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	600 × 480 × 815 mm
Seat height	510 mm
Seat width	560 mm
Seat depth	450 mm
Backrest height from seat	420 mm
Armrest height from seat	220 mm
Under-seat knee clearance height	450 mm
Seat cushion thickness	127 mm
Leg splay width at floor	580 mm
Leg tube diameter	25 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight per chair	9 kg
Recommended static load capacity	118 kg
Seat foam density	45 kg/m³
Seat foam rebound rate	55%
Backrest foam thickness	50 mm
Upholstery abrasion resistance	30000 cycles
Seam stitch pitch	8 stitches per 30mm
Applicable user count	1 adult per chair
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat, back and armrest upholstery	Grey matte PU leatherette with tight tailored stitching
Seat core padding	High-resilience polyurethane foam
Backrest core padding	Medium-density polyurethane foam
Integrated armrest frame	Padded rigid support encased in matching upholstery
Chair support frame	1.5mm thick powder-coated dark bronze steel
Leg floor contact pads	Non-marking anti-scratch plastic glides
Frame connection hardware	Zinc-plated steel KD assembly bolts and brackets
Internal seat support panel	12mm thick multilayer plywood under cushion
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating motion	Fixed non-swivel, non-reclining, non-height-adjustable structure
Arm support function	Continuous integrated wrap-around armrests for forearm support during dining
Back support function	Ergonomic contoured backrest with slight lumbar curve for upright dining posture
Assembly requirement	Knock-down assembly with included hex key, hardware and instructions
Floor protection function	Bottom glides prevent hard floor scratches and allow smooth repositioning
Stacking capability	Non-stackable fixed frame design
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Packaging materials	Five-layer corrugated carton with foam edge protection and polybag wrap
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential dining space	Suited for standard 760 mm height dining tables in home dining rooms
Cafe and casual restaurant seating	Durable metal frame and upholstered surface for high-traffic food service use
Open office breakout areas	Comfortable upholstered seating for informal meeting or lunch spaces
Hotel guest room and banquet seating	Contemporary styling suited for hospitality dining and lounge nooks
Recommended table clearance	Requires minimum 640mm table apron clearance to fit armrests under tabletop
Floor type compatibility	Suitable for hard wood, tile, and low-pile carpet floors with included glides
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12520:2015	Furniture for domestic and contract seating strength/durability/safety, applicable for commercial use
EN 1022:2018	Domestic furniture seating stability test method, applicable for tip-resistance verification

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden and metal furniture, applicable for structural stability verification
GB/T 10357.3-2013	Furniture mechanical test for chair seat and back strength, applicable for load performance acceptance
GB 18584-2001	Indoor decoration material limit of harmful substances for wooden furniture, applicable for emission compliance

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden and metal furniture, applicable for structural stability verification；
2. GB/T 10357.3-2013：Furniture mechanical test for chair seat and back strength, applicable for load performance acceptance；
3. GB 18584-2001：Indoor decoration material limit of harmful substances for wooden furniture, applicable for emission compliance；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · DIN-ARM-GRY-MTL001

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · DIN-ARM-GRY-MTL001

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · DIN-ARM-GRY-MTL001打开导出工具

页面快速操作

发布采购询价

产品描述

The Modern Upholstered Arm Dining Chair (model DIN-ARM-GRY-MTL001, unbranded) features a streamlined, minimalist silhouette defined by clean lines and balanced proportions, pairing soft, fully upholstered surfaces with a sleek tapered metal base. The continuous wrap-around armrests flow seamlessly from the contoured backrest to the front of the seat, creating a cohesive, tailored look with tight, precise stitching across all upholstered sections. The four-leg fixed structure places slender, tapered legs at each corner, with a dark bronze-toned finish that contrasts subtly against the matte grey upholstery for a refined modern aesthetic. Construction centers on a 1.5mm thick powder-coated dark bronze steel frame, connected with zinc-plated steel knockdown assembly hardware. The seat rests on a sturdy multilayer and bent plywood support structure, topped with high-resilience polyurethane foam for the seat cushion, paired with medium-density polyurethane foam in the backrest. All padded surfaces – seat, back, and integrated armrests – are covered in grey matte PU leatherette. Legs terminate in non-marking, anti-scratch plastic glides to protect floor surfaces. As a fixed-position seating piece, it does not swivel, recline, or adjust in height, though it offers ergonomic support for dining use: the contoured backrest includes a subtle lumbar curve to support upright seated posture, while the wrap-around armrests provide steady forearm support during meals. The structure supports regular daily use, with upholstery tested for long-term abrasion resistance. Assembly is required for delivery, with all necessary hardware, a hex key, and step-by-step instructions included, and assembly time for a full set runs 40 minutes. The non-stackable design is intended for stable, long-term placement, with glides that allow smooth repositioning without scuffing floors. This chair suits a wide range of residential and commercial settings. In homes, it pairs perfectly with standard-height dining tables in dedicated dining rooms, as long as the table offers sufficient apron clearance to tuck armrests fully under the tabletop. For commercial use, its durable frame and easy-to-clean upholstery make it ideal for cafe and casual restaurant high-traffic seating, open office breakout areas for informal meetings or lunch breaks, and hotel guest rooms or banquet spaces where its contemporary styling complements modern hospitality design. It performs reliably on hardwood, tile, and low-pile carpet floors with its included glides. Procurement teams and residential buyers should note key planning details prior to purchase: each chair is shipped across two cartons for a single set, with robust five-layer corrugated packaging, foam edge protection, and polybag wrapping to prevent transit damage. Buyers should confirm target tables meet the required apron clearance to ensure the chair slides under tabletops unobstructed, and account for assembly time and basic tool access during setup. The chair’s fixed, non-adjustable structure is designed for dedicated dining and casual seating use, rather than flexible multi-function work or lounge applications that require position adjustments.

Modern Upholstered Arm Dining Chair with Tapered Metal Legs Specifications

供应商与现货