纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1600 × 900 × 760 mm
Tabletop thickness	20 mm
Leg cross-section size	50 x 50 mm
Leg wall thickness (metal construction)	1.5 mm
Knee clearance height under apron	680 mm
Per-side seating edge length	1600 mm (long side), 900 mm (short side)
Leg splay outward offset from table corner	120 mm
Brass foot cap height	30 mm
Table corner radius	10 mm
Under-table floor clearance	150 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Tabletop static distributed load capacity	150 kg
Net product weight	60 kg
Seating capacity	4 people
Tabletop Mohs scratch hardness	6
Surface stain resistance rating	Class 5
Surface water absorption rate	0.2%
Frame static lateral load resistance	80 kg
Warranty period	2 years
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop substrate	12mm sintered stone slab with smooth glossy white finish
Tabletop backing layer	8mm honeycomb/MDF reinforcement board
Leg structure	Angled tapered dark matte black carbon steel legs
Foot cap material	Brass-plated zinc alloy protective foot caps
Floor protection pad	Non-slip PE felt pad under each foot cap
Connector hardware	Zinc-plated steel M8 bolt assembly with lock washers
Surface finish on legs	Matte black powder coating, 60um thickness
Apron frame	20x40mm rectangular steel tube support frame under tabletop
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating access	Open 4-side leg layout allows seating on all table edges
Surface performance	Heat, scratch and stain resistant non-porous tabletop
Leveling adjustment	10mm adjustable height on each foot cap for uneven floors
Assembly requirement	Flat-pack assembly with included hex key and hardware
Fixed structure	Non-extendable fixed rectangular top, no built-in storage
Edge design	Soft rounded tabletop edges to reduce impact injury
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential dining space	Suitable for 4-person home dining rooms in compact and medium apartments
Small open-plan kitchen	Fits open kitchen dining zones paired with modern minimalist interior design
Apartment balcony dining nook	Suitable for enclosed high-rise balcony dining areas with city views
Small casual cafe seating	Usable for boutique cafe 4-seat dining areas with light luxury aesthetic
Recommended pairing	Pairs with upholstered dining chairs with dark tapered legs and brass foot details

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Safety strength and durability requirements for domestic dining tables, applicable for performance verification
EN 13722:2004	Test methods for furniture surface resistance to cold liquids, applicable for finish checks

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for structural safety checks
GB/T 4893.4-2013	Surface wear resistance test method for furniture surfaces, applicable for finish acceptance
GB 18584-2001	Limit of harmful substances for interior decoration wood furniture, applicable for emission testing

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable for structural safety checks；
2. GB/T 4893.4-2013：Surface wear resistance test method for furniture surfaces, applicable for finish acceptance；
3. GB 18584-2001：Limit of harmful substances for interior decoration wood furniture, applicable for emission testing；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · DT-WH1600-DL-4SEAT

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · DT-WH1600-DL-4SEAT

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · DT-WH1600-DL-4SEAT打开导出工具

页面快速操作

发布采购询价

产品描述

This modern minimalist rectangular dining table features a sleek white top paired with dark splayed legs capped in brass, delivering a streamlined, light luxury aesthetic suited to contemporary interiors. The open leg layout positions each tapered dark matte black carbon steel leg 120 mm outward from the table corners, creating unobstructed access to seating along all four edges without visual bulk, while the brass-plated zinc alloy foot caps add a subtle polished accent to the dark frame. Soft rounded edges on the tabletop reduce impact risk for casual daily use.
The table’s construction balances durability and stable support. Its top uses a 12mm glossy white sintered stone slab with an 8mm honeycomb and MDF reinforcement backing for a total 20 mm tabletop thickness, mounted to a 20x40mm rectangular steel tube apron frame. The 50 x 50 mm carbon steel legs have a 1.5 mm wall thickness, finished with 60um matte black powder coating for a smooth, wear-resistant dark surface. Each leg connects to the frame via zinc-plated steel M8 bolt assemblies with lock washers, and sits on a brass-plated foot cap fitted with a non-slip PE felt pad to protect flooring. The foot caps offer 10mm of height adjustment to accommodate uneven floors, and hold a discrete cable management tray with capacity for 10 power or data cables, supporting up to 10 kg of cable weight.
Practical performance is tailored for regular daily use: the non-porous sintered stone surface rates 6 on the Mohs scratch hardness scale, holds a Class 5 stain resistance rating, and has a 0.2% water absorption rate, with inherent heat, scratch, and stain resistance to simplify cleanup. The table supports a 150 kg static distributed load on the tabletop, and the frame resists 80 kg of static lateral force. It offers fixed, non-extendable seating for 4 people, with 680 mm of knee clearance under the apron and no built-in storage to maintain its clean profile. It arrives as flat-pack components across two cartons, with all required hardware and an included hex key for assembly that takes 40 minutes per unit. Each set weighs 60 kg net, with a packaged gross weight of 90 kg.
This table fits a range of compact dining settings: it works well for 4-person home dining rooms in compact and medium apartments, small open-plan kitchen dining zones aligned with modern minimalist design, enclosed high-rise balcony dining nooks, and 4-seat seating areas in boutique casual cafes with a light luxury aesthetic. It pairs best with upholstered dining chairs that feature dark tapered legs and matching brass foot details to coordinate with its design language. For procurement, note the fixed, non-extendable structure does not support expanded seating for large groups, and plan for appropriate delivery handling given the 0.55 m³ packaged volume across two cartons. The unbranded model DT-WH1600-DL-4SEAT has overall dimensions of 1600 x 900 x 760 mm, with a 1600 mm long edge and 900 mm short edge for seating placement.

Modern Minimalist Rectangular White Top Dining Table with Dark Splayed Brass-Capped Legs Specifications

供应商与现货