纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1520 × 1520 × 760 mm
Tabletop diameter	1520 mm
Tabletop thickness	25 mm
Floor to tabletop underside clearance	718 mm
Pedestal base floor plate diameter	680 mm
Pedestal upper connection diameter	320 mm
Pedestal wall thickness	3 mm
Edge radius	10 mm
Clearance around full pedestal perimeter	420 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	90 kg
Distributed static tabletop load capacity	300 kg
Recommended seating capacity	6 persons
Surface scratch resistance rating	3000 abrasion cycles
Base static floor load rating	350 kg
Surface stain resistance rating	Grade 4
Wobble deflection at table edge under 50kg point load	2 mm
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop substrate	High-density MDF core with engineered stone veneer
Tabletop inlay	Light-colored resin or wood veneer crisscross geometric pattern
Tabletop edge finish	Matte dark finished edge matching tabletop surface
Pedestal column	Powder-coated matte black carbon steel conical column
Floor base plate	Powder-coated matte black carbon steel circular plate
Underside support bracket	Powder-coated black steel apron bracket
Floor protection pads	Injection-molded non-slip PE plastic glides
Fasteners	Zinc-plated steel M8 assembly bolts and brackets
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating access	Unobstructed 360-degree perimeter legroom with no corner legs
Assembly requirement	Knock-down assembly connecting tabletop to pedestal and base plate
Extendable function	Non-extendable fixed round tabletop
Surface maintenance	Wipe-clean matte surface resistant to common food and liquid stains
Floor protection	Non-marking glides prevent scratching hard flooring surfaces
Weight distribution	Wide circular base plate distributes load evenly to prevent tipping
Edge safety	Rounded smooth edge reduces impact injury risk
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential dining room	Seats 6 people for daily family meals and casual entertaining
Open-plan kitchen dining area	Minimalist silhouette fits modern open-concept kitchen layouts
Small apartment dining nook	Single pedestal eliminates leg obstructions for flexible chair placement
Café and bistro seating	Durable matte surface withstands high-frequency commercial use
Modern office break room	Provides casual dining and collaboration seating for staff

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Domestic furniture strength, durability and safety requirements for dining tables
EN 1022:2019	Furniture seating stability test methods, applicable for tip resistance verification
EN 13722:2004	Furniture test methods for surface finish resistance to cold liquids

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for tabletop substrate quality
GB/T 4893.4-2013	Surface film adhesion test method for furniture surfaces
GB/T 4893.8-2013	Surface wear resistance test method for furniture

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable for tabletop substrate quality；
2. GB/T 4893.4-2013：Surface film adhesion test method for furniture surfaces；
3. GB/T 4893.8-2013：Surface wear resistance test method for furniture；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · RDT-CB1520-GI

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · RDT-CB1520-GI

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · RDT-CB1520-GI打开导出工具

页面快速操作

发布采购询价

产品描述

The RDT-CB1520-GI unbranded round dining table balances minimalist contemporary styling with robust, functional design for both residential and light commercial settings. Its visual identity centers on a smooth dark circular tabletop accented with a light crisscross geometric inlay, supported by a sleek matte black conical pedestal that tapers from a wide circular floor plate up to the tabletop’s underside. The single pedestal structure creates a clean, uncluttered silhouette free of intrusive corner legs, with softly rounded tabletop edges that lend a polished, approachable finish suited to modern design schemes.
Construction uses durable, purpose-selected materials built for long-term regular use. The tabletop features a high-density MDF core with an engineered stone veneer, finished to a 25mm thickness with a matched matte dark edge; its inlay is formed from light-colored resin or wood veneer set in a precise geometric pattern. The support structure includes a powder-coated matte black carbon steel conical column and matching circular floor base plate, secured with powder-coated black steel apron brackets and zinc-plated steel M8 assembly bolts. Injection-molded non-slip PE plastic glides line the base plate’s underside to protect flooring, while the wide base plate distributes weight evenly to reduce tipping risk. The table holds a net weight of 90kg, with a distributed static tabletop load capacity of 300kg, surface scratch resistance rated for 3000 abrasion cycles, Grade 4 stain resistance, and only 2mm of wobble deflection at the table edge under a 50kg point load.
Practically, the fixed non-extendable tabletop offers unobstructed 360-degree perimeter legroom to accommodate six people comfortably, with flexible chair placement unimpeded by corner legs. Its matte wipe-clean surface resists common food and liquid stains for simple upkeep, and rounded smooth edges lower impact injury risk. The unit ships in knock-down form across two cartons, with a reference assembly time of 40 minutes per set, and non-marking glides prevent scuffs and scratches on hard flooring surfaces.
This table is well suited for residential dining rooms hosting daily family meals and casual gatherings, open-plan kitchen dining areas where its streamlined silhouette complements open-concept layouts, small apartment dining nooks where unobstructed legroom maximizes limited space, high-traffic café and bistro seating, and modern office break rooms supporting casual staff dining and collaboration. Procurement teams should note the knock-down assembly requirement, packaged volume of 0.55 cubic meters per set, and fixed seating capacity to align space allocation and installation planning with project needs. Total word count: 438

Modern Round Geometric Inlaid Dining Table with Matte Black Conical Pedestal Base Specifications

供应商与现货