纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1800 × 900 × 760 mm
Overall table dimensions	1800 x 900 x 760 mm
Tabletop thickness	20 mm
Leg profile dimension	30 x 15 mm rectangular steel
Under-table knee clearance height	680 mm
Chair seat height	450 mm
Chair seat depth	450 mm
Chair backrest height	350 mm
Anti-slip foot pad diameter	30 mm
Long-side seating clearance per chair	600 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Table distributed static load capacity	136 kg
Set seating capacity	6 people
Table net weight	58 kg
Tabletop heat resistance rating	1200 °C
Chair upholstery abrasion resistance	50000 cycles
Powder coating corrosion resistance salt spray test	48 hours
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles
Five-star Base Static Load Reference	Acceptance target ≥120 kg; chair reference load 150 kg

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop surface layer	White matte sintered stone
Tabletop substrate	High-density MDF reinforcement
Table leg construction	1.5mm thick carbon steel tubing
Leg surface finish	Black matte powder coating
Chair seat/back cushion core	35kg/m³ high-density polyurethane foam
Chair upholstery fabric	Stain-resistant woven velvet
Chair frame construction	1.2mm thick black powder-coated steel
Floor contact pads	Non-marking TPE rubber
Assembly hardware	Zinc-plated steel bolts and Allen key
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Assembly requirement	Knock-down leg attachment for table and chairs
Floor protection function	TPE foot pads prevent floor scratches and reduce sliding
Tabletop maintenance function	Non-porous surface wipes clean with damp cloth
Chair seating design	Fixed non-swivel armless configuration with upright back support
Tabletop safety design	Softened rounded corners reduce impact injury risk
Seating layout configuration	3 chairs per long side, no head chairs for 6-person capacity
Finish durability function	Powder coated legs resist chipping and corrosion from daily cleaning
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential dining room use	6-person capacity fits open-plan home dining areas
Small commercial cafe use	Durable construction suits light-traffic casual dining spaces
Apartment open-plan living use	Slim metal legs keep visual space light in small units
Model home staging use	High-contrast orange and white palette creates modern visual focal point
Office break room use	Stain-resistant surfaces support daily employee meal use
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Strength, durability and safety for domestic dining tables
EN 12520:2015	Strength, durability and safety for domestic seating
EN 1022:2018	Stability test for seating furniture

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture applicable to tabletop substrate
GB/T 4893.4-2013	Surface wear resistance test applicable to tabletop finish
GB/T 10357.1-2013	Table strength and stability test for dining furniture
GB/T 10357.3-2013	Chair strength and durability test for seating furniture

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture applicable to tabletop substrate；
2. GB/T 4893.4-2013：Surface wear resistance test applicable to tabletop finish；
3. GB/T 10357.1-2013：Table strength and stability test for dining furniture；
4. GB/T 10357.3-2013：Chair strength and durability test for seating furniture；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · DT-WTBL-ORCH-1800

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · DT-WTBL-ORCH-1800

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · DT-WTBL-ORCH-1800打开导出工具

页面快速操作

发布采购询价

产品描述

This modern rectangular dining table set features a clean, minimalist silhouette defined by a high-contrast white and black palette complemented by warm upholstered seating. Its layout arranges three armless chairs along each long side of the table, with no dedicated head chairs, to comfortably seat six people, while slim rectangular metal legs preserve an open, uncluttered visual profile that keeps surrounding space feeling light. Softened rounded corners on the tabletop add a subtle, approachable design detail that enhances everyday safety.
The table is built with a white matte sintered stone surface layered over high-density MDF reinforcement for stable everyday use, supported by 1.5mm thick carbon steel tubing legs finished in scratch-resistant black matte powder coating. Each chair features a 1.2mm thick matching powder-coated steel frame, fixed non-swivel upright back support, and cushions cored with high-density polyurethane foam wrapped in stain-resistant woven velvet. Non-marking TPE rubber pads line all floor contact points, and zinc-plated steel hardware is included for knock-down assembly of both table and chairs.
Functional performance is tailored to regular daily use: the non-porous sintered stone tabletop resists heat and wipes clean easily with a damp cloth, powder-coated leg finishes resist chipping and corrosion from routine cleaning, and the velvet upholstery holds up to repeated use without premature wear. The TPE foot pads prevent floor scratches and reduce unwanted sliding, while the table’s static load capacity supports standard dining use.
This set fits a wide range of spaces, from open-plan home dining areas and compact apartment living zones to light-traffic commercial cafes, office break rooms, and model home staging installations, where its contemporary palette acts as a polished visual focal point. For procurement teams, the set ships in two cartons per unit, with a straightforward assembly process that takes roughly 40 minutes per set, and efficient stackable packaging that supports high-volume container loading for commercial orders. Design teams may note the set pairs cohesively with a 2.4m executive desk for coordinated open-office or multi-use residential layouts.

Modern Rectangular Dining Table Set with Upholstered Chairs Specifications

供应商与现货