数据来源
可联系供应商获取生产周期与报价。
PRODUCT MODULE 01 / 06
基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源：工厂资料结构化字段，最终以实测值为准
| 产品外部尺寸（宽 × 深 × 高） | 2200 × 900 × 750 mm | |
|---|---|---|
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源：产品性能数据，采购前请核对具体测试口径
| Tabletop static load capacity | 150 kg | |
|---|---|---|
| Product net weight | 85 kg | |
| Recommended seating capacity | 6 persons | |
| Surface scratch resistance rating | 6 Mohs | |
| Surface heat resistance threshold | 1200 °C | |
| Surface stain resistance level | Grade 5 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
PRODUCT MODULE 03 / 06
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源：以工厂材质清单与验货报告为准
| Tabletop | Polished white sintered stone, 12mm thickness, non-porous seamless surface | |
|---|---|---|
| Support columns | Matte black powder-coated carbon steel, 1.5mm wall thickness, solid rectangular profile | |
| Vertical slats | Matte black powder-coated carbon steel, 1.5mm wall thickness, flat bar profile | |
| Frame cross bracing | Matte black powder-coated carbon steel, welded connection for structural rigidity | |
| Base foot pads | Non-slip TPE rubber pads, 5mm thickness, floor-protective design | |
| Tabletop edge finish | Straight polished eased edge, no sharp corners, 1mm radius | |
| Surface coating on steel | Epoxy polyester powder coat, 60μm thickness, anti-corrosion treatment | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
PRODUCT MODULE 04 / 06
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源：功能配置参数，以供应商正式规格为准
| Fixed height design | 750mm standard dining height, compatible with 480 mm seat height dining chairs | |
|---|---|---|
| Open base design | Slatted metal framing provides unobstructed leg room for all seating positions | |
| Non-porous tabletop surface | Resists absorption of spills, requires only wiping with damp cloth for cleaning | |
| Scratch and abrasion resistant surface | Withstands daily use from cutlery, crockery and decorative items without permanent marking | |
| Heat resistant tabletop | Allows direct placement of hot serving dishes and cookware without surface damage | |
| Floor protection design | Rubber foot pads prevent scuffing and scratching on hard flooring and low-pile carpet | |
| Stable dual-support base | Two separate support sections distribute weight evenly to eliminate table wobble | |
| Support column width (each solid block) | 150 mm | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源：外贸报价与装柜测算参考
| Packaged tabletop carton dimensions | 2300 x 1000 x 80 mm | |
|---|---|---|
| Packaged base carton dimensions | 1300 x 700 x 200 mm | |
| Total shipping gross weight | 105 kg | |
| Total shipping volume | 0.37 CBM | |
| Required assembly time | 40 minutes | |
| 20ft container loading capacity | 52 units | |
| 40ft HQ container loading capacity | 124 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm |
PRODUCT MODULE 06 / 06
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源：依据产品结构与品类整理的推荐应用场景
| Residential dining room | Suits modern minimalist, light luxury open-plan dining areas for family daily meals and small gatherings | |
|---|---|---|
| Open-plan kitchen dining zone | Fits kitchen island adjacent dining spaces, complements dark and light neutral interior palettes | |
| Small formal meeting space | Suitable for boutique office breakout rooms or client meeting areas for 6-person discussions | |
| Studio apartment dining area | Fits large open studio spaces, provides functional dining surface without visual heaviness | |
| Show home display setting | Ideal for modern residential show home staging to demonstrate contemporary dining configuration |
STANDARD S1
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic dining tables, applicable for load and stability testing | |
|---|---|---|
| EN 13722:2004 | Furniture - Test methods for surface resistance to cold liquids, applicable to tabletop stain testing |
STANDARD S3
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to structural stability testing | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances, applicable to metal finish VOC testing |
招标文件标准化描述文本
本产品须满足以下技术参数要求： 1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to structural stability testing； 2. GB 18584-2001：Indoor decorating and refurbishing materials - limit of harmful substances, applicable to metal finish VOC testing； 最终交付参数、检测报告和验收标准以双方采购合同为准。
GENERATED EXPORTS
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告，可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块，文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具