Name: Modern Rectangular Sintered Stone Dining Table with C-Shaped Gunmetal Pedestal Base
Brand: JUESHANGDA
SKU: VXDS1H

纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1800 × 900 × 750 mm
Tabletop thickness	12 mm
Under-table knee clearance height	680 mm
Floor base plate dimensions	900 x 500 x 15 mm
C-pedestal wall thickness	8 mm
Tabletop edge radius	15 mm
Long-side leg setback	450 mm
Short-side leg setback	200 mm
Pedestal arc inner diameter	420 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Distributed static tabletop load capacity	136 kg
Recommended seating capacity	6 persons
Net product weight	90 kg
Tabletop surface Mohs hardness	6
Instant tabletop heat resistance	300 °C
Tabletop water absorption rate	0.05%
Base static stability load	200 kg
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop panel	12mm polished sintered stone with white-grey marble veining
Tabletop edge finish	Honed and rounded polished sintered stone
Pedestal support	8mm thick gunmetal brushed stainless steel C-arc structure
Floor base plate	15mm thick black powder-coated carbon steel rectangular plate
Joint connection hardware	M10 galvanized steel bolts with anti-loosening lock washers
Floor contact pads	5mm thick non-slip rubber adjustable glides
Pedestal surface finish	Brushed gunmetal PVD coating for corrosion resistance
Underside reinforcement	20mm thick MDF backing board bonded to sintered stone
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Table type	Fixed non-extending rectangular dining surface
Assembly type	Knock-down assembly with 8 connecting bolts between top, pedestal and base
Seating access	Open C-base design provides unobstructed leg room on all four sides
Floor protection	Adjustable rubber glides compensate for 10mm floor unevenness
Surface performance	Stain, scratch and heat resistant tabletop suitable for hot dish placement
Stability design	Wide rectangular base plate prevents tipping under offset tabletop loads
Cleaning access	Smooth open understructure allows full floor cleaning around the base
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential dining rooms	Fits 6-seat dining layouts in open-plan or separate dining areas
Apartment small dining zones	Compact single pedestal design saves floor space compared to 4-leg tables
Modern minimalist interiors	Gunmetal base and marble-look top complement contemporary light luxury decor
Cafe and bistro seating areas	Durable sintered stone top withstands high-frequency commercial dining use
Show home and model apartment staging	Sleek sculptural form creates a high-end visual impression for display settings

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Furniture strength, durability and safety for domestic dining tables
EN 1022:2018	Domestic furniture seating stability test applicable to table leg clearance layout

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to backing board structural safety
GB/T 4893.1-2021	Furniture surface test for cold liquid resistance, applicable to sintered stone top

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to backing board structural safety；
2. GB/T 4893.1-2021：Furniture surface test for cold liquid resistance, applicable to sintered stone top；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · DT-CARC1809-750

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · DT-CARC1809-750

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · DT-CARC1809-750打开导出工具

页面快速操作

发布采购询价

产品描述

The JUESHANGDA Modern Rectangular Sintered Stone Dining Table with C-Shaped Gunmetal Pedestal Base (model DT-CARC1809) features a sleek, contemporary minimalist silhouette defined by clean lines and a sculptural single-pedestal layout. Its rectangular tabletop displays subtle white-grey marble veining on a polished sintered stone surface, with honed, rounded softened edges for a refined finished look. The signature C-arc support structure connects the tabletop to a wide rectangular floor plate, finished in brushed gunmetal, creating an open, uncluttered understructure that avoids the visual bulk of traditional four-leg table designs. The tabletop is constructed from polished sintered stone bonded to a reinforcement backing board, with a composite build-up for reliable load bearing. The C-shaped pedestal is formed from thick brushed stainless steel treated with a gunmetal PVD coating to resist corrosion, secured to the 15mm thick black powder-coated carbon steel base plate and tabletop assembly with galvanized steel bolts fitted with anti-loosening lock washers. Non-slip rubber adjustable glides line the base plate’s floor contact points to protect flooring surfaces. The sintered stone surface delivers stain, scratch and heat resistance suitable for direct placement of hot serving dishes, while the open C-base design delivers unobstructed leg room across all four sides of the table for comfortable, flexible seating access. The wide base plate is engineered to prevent tipping under offset loads, and the smooth, open understructure allows unobstructed floor cleaning around the base. The fixed, non-extending surface is designed to accommodate six people for dining, with adequate under-table knee clearance for comfortable use. The table ships as a knock-down assembly across two cartons, with straightforward assembly requiring connection of the top, pedestal and base components. This table fits equally well in residential and commercial settings. In homes, it supports six-seat dining layouts in both open-plan and separate dining rooms, and its space-efficient single pedestal design works effectively in smaller apartment dining zones, complementing modern minimalist and contemporary light luxury decor schemes. For commercial use, its durable sintered stone surface stands up to high-frequency use in cafes and bistros, while its sleek, sculptural form delivers a high-end visual presence ideal for show home and model apartment staging. Procurement teams should account for the two-carton packaging configuration and required assembly time when planning delivery and installation workflows, and note that adjustable glides allow the table to sit stably on slightly uneven floor surfaces. The fixed non-extending design is best suited for spaces that consistently serve six diners, rather than settings requiring flexible expanded seating capacity.

Modern Rectangular Sintered Stone Dining Table with C-Shaped Gunmetal Pedestal Base Specifications

供应商与现货