The Modern Rectangular 4-Seat Dining Table with Grey Polished Top and Black Metal Sled Base from Wanhao Metal, model DT-GSLD1600S, delivers a sleek, minimalist contemporary profile anchored by clean, unadorned lines. Its fixed rectangular form features soft rounded tabletop corners set back slightly from the base edges, paired with an open sled underframe that creates light visual weight without cluttering sightlines across a space. The table is built for long-term durability across high-use settings. Its 12mm thick polished grey sintered stone tabletop carries a high-gloss, non-porous finish, mounted to the frame via four bonded steel brackets fitted with anti-vibration rubber pads. The support structure uses a black powder-coated carbon steel sled base, finished with an 80μm thick matte black electrostatic powder coat, joined with M8 zinc-plated steel hex bolts and lock nuts. Vertical legs have a 50 x 50 mm cross-section, while the horizontal underframe uses 40 x 80 mm tubing with 1.5 mm wall thickness, capped with 10mm thick non-slip injection-molded TPE floor protection pads. Overall dimensions measure 1600 x 900 x 760 mm, with 710 mm of clear knee clearance beneath the tabletop. Engineered for stable, low-maintenance use, the rigid fixed sled base includes closed bracing to eliminate wobble on level hard flooring, with no height adjustment mechanisms or moving parts to wear over time. The non-porous sintered stone surface resists liquid staining and heat damage from hot servingware, with a Mohs surface hardness of 7, 1200°C heat resistance, Class 5 stain resistance, and 0.2% water absorption rate. Its 760mm work height pairs seamlessly with standard 450mm seat height dining chairs, and rounded polished edges remove sharp corners to reduce impact injury risk. The TPE foot pads prevent hard metal contact with flooring and reduce unwanted slip. Knock-down assembly is required, with an included hex key and all necessary hardware, taking 40 minutes per set; the product ships in two cartons per set. This table is ideally suited for compact modern apartment dining areas, open-concept kitchen dining zones, contemporary casual cafes and bistros, modern serviced short-stay rental properties, and minimalist office staff pantries or informal breakout spaces, each configured to seat four users. For procurement, stakeholders should account for the 90 kg total packaged weight across two cartons, and note that the fixed non-adjustable structure requires placement on level hard flooring to deliver optimal stability. The table supports a distributed static tabletop load of 700 kg, with a net product weight of 55 kg.