纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1200 × 500 × 950 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	24 kg
Distributed worktop static load	80 kg
Single-point worktop load	30 kg
Recommended user capacity	1 person
Caster total rated capacity	120 kg
Braked caster count	4
Height adjustment positions	7
Mobility cycle target	20000 cycles
Warranty period	3 years
Reference Static Load	150 kg depending on category

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Worktop substrate	25 mm engineered wood-fiber board with light gray melamine surface
Worktop edge	2 mm black PVC edge banding with rounded corners
Edge trim line	Black resilient bumper strip along the front and rear worktop edges
Vertical columns	50 mm powder-coated steel tubes with light gray finish
Upper lifting crossbar	Oval steel cross rail with light gray powder coating
Base feet	Cold-formed steel C-section or box rails with light gray powder coating
Modesty panel	12 mm dark graphite composite board with matching edge finish
Adjustment knobs	Glass-filled nylon rotary knobs with steel insert and numbered dial
Caster wheels	Twin nylon wheels with black thermoplastic tread and swivel steel fork
Hardware	Zinc-plated steel bolts, inserts, and mounting plates with black plastic collars
Floor contact parts	Non-marking black TPE caster treads
Surface finish system	Epoxy-polyester powder coating on steel frame

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Manual height adjustment	Rotary side knobs release two synchronized columns and lock the top through 7 positions over 230 mm
Synchronized side locking	Left and right locking collars grip the vertical columns to keep the worktop level
Mobile repositioning	Four swivel twin casters allow 360-degree movement between classrooms or meeting areas
Individual wheel brakes	Each caster has a press-down brake lever to prevent rolling during writing or keyboard work
Modesty screening	900 x 380 mm panel conceals the user's lap and under-desk area from the front
Knockdown assembly	Top, legs, base feet, panel, and casters assemble with threaded fasteners for flat-pack logistics
Seated-to-standing use	950 mm height range supports task chairs at the low end and standing writing at 950 mm
Cable and equipment layout	Open under-top rail provides space for a clip-on cable tray or power strip with 380 mm rear depth clearance
Floor protection	Non-marking treads and braked wheels reduce hard-floor scuffing during short-distance moves
Side-to-side stability	620 mm longitudinal base feet and twin end casters resist tipping under normal top loading
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Training classroom	Supports one learner per table and allows rapid room reconfiguration during course changes
Meeting or breakout area	Provides a temporary writing and laptop surface that can be moved aside after workshops
Open-plan office	Fits hot-desk neighborhoods where staff need a lightweight height-adjustable workstation
Home study	Serves schoolwork, laptop tasks, or standing document review in a bedroom or study corner
Examination or polling room	Enables quick row layouts and secure stationary placement through four wheel brakes
Temporary reception workspace	Creates a portable sign-in or device-placement surface at events and presentations
Library or learning center	Suitable for short-stay reading and laptop stations requiring occasional height changes

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-1:2011	Office worktables and desks safety, strength, and durability requirements, applicable to the adjustable table structure
EN 527-2:2002	Applicable standards and test results require confirmation
EN 1729-1:2015	Furniture for educational institutions safety and strength requirements, applicable when used in classrooms or training rooms
EN 1729-2:2015	Educational furniture test methods, applicable to strength, stability, and durability verification
EN 13986:2004+A1:2015	Wood-based panels for construction, useful as a panel-performance reference when equivalent board data is supplied

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.5

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to the melamine-faced panel and edge workmanship
GB/T 3325-2017	Metal furniture general technical requirements, applicable to steel legs, rails, coating, and welded or fastened joints
GB/T 3326-2016	Furniture dimensional measurement basis, applicable to verifying worktop height, clearance, and footprint dimensions
GB 18584-2001	Indoor wooden furniture formaldehyde emission limit, applicable to panel components in indoor sales to China
GB/T 10357.5-2011	Furniture surface physics and chemistry test method for strength, applicable where desk-panel load performance is specified

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to the melamine-faced panel and edge workmanship；
2. GB/T 3325-2017：Metal furniture general technical requirements, applicable to steel legs, rails, coating, and welded or fastened joints；
3. GB/T 3326-2016：Furniture dimensional measurement basis, applicable to verifying worktop height, clearance, and footprint dimensions；
4. GB 18584-2001：Indoor wooden furniture formaldehyde emission limit, applicable to panel components in indoor sales to China；
5. GB/T 10357.5-2011：Furniture surface physics and chemistry test method for strength, applicable where desk-panel load performance is specified；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · MT-R1200-MOD-CASTER

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · MT-R1200-MOD-CASTER

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · MT-R1200-MOD-CASTER打开导出工具

页面快速操作

发布采购询价

产品描述

The Mobile Height-Adjustable Rectangular Training Table with Modesty Panel is a practical single-user workspace designed for flexible learning, meeting, and office environments. Its rectangular light gray laminated worktop is paired with black PVC edge banding, rounded corners, and resilient black bumper strips along the front and rear edges. The light gray powder-coated steel frame uses vertical columns, an oval upper lifting cross rail, and C-section or box-style base rails to create a structured mobile base. A dark graphite modesty panel beneath the worktop gives the table a finished appearance while screening the user’s lap and under-table area from the front. Construction balances durability with manageable logistics. The worktop is built on a 25 mm engineered wood-fiber board with a light gray melamine surface, while the 12 mm dark composite modesty panel is supplied with a matching edge finish. Glass-filled nylon rotary knobs with steel inserts and numbered dials provide the adjustment interface, and four swivel twin-wheel nylon casters with black thermoplastic treads and steel forks support movement. The complete table weighs 24 kg and is shipped knocked down in two cartons, with the top, legs, base feet, panel, and casters assembled using threaded fasteners. Manual height adjustment is controlled through side knobs that release two synchronized columns and lock the worktop through seven positions over a 230 mm adjustment range. Left and right locking collars engage the vertical columns to help keep the surface level. The configuration supports seated use with a task chair and standing writing or document review at the 950 mm upper height. For relocation, all four casters swivel for 360-degree movement, and each caster includes a press-down brake, allowing the table to remain stationary during writing, keyboard work, or examinations. This model is well suited to training classrooms where one learner occupies each table and layouts must change quickly between sessions. It also works as a temporary writing or laptop surface in meeting rooms, breakout areas, workshops, and hot-desk neighborhoods, as well as in examination or polling rooms that require orderly rows. In residential settings, it can support schoolwork, laptop tasks, or standing review in a bedroom or study corner. Event teams can use it as a portable sign-in or device-placement surface in temporary reception areas. Procurement planners should consider the table’s intended one-person use, its 80 kg distributed static worktop load, 30 kg single-point load, and 120 kg total caster rated capacity. Assembly time is referenced at 40 minutes per set, and packaging volume is 0.8 cubic meters per set, making delivery, storage, and installation planning important for larger rollouts. The two-tone appearance, modesty panel, manual adjustment, brakes, and mobile base make it a versatile choice where reconfiguration and occasional seated-to-standing use are priorities.

Mobile Height-Adjustable Rectangular Training Table with Modesty Panel Specifications

供应商与现货