纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1200 × 500 × 750 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Product net weight	24 kg
Distributed work-surface load	80 kg
Concentrated panel load	30 kg
Recommended users	1 person
Caster dynamic load	120 kg total
Frame static lateral load	40 kg
Flip mechanism service life	10000 cycles
Warranty period	3 years
Color options	2 colors
Reference Static Load	150 kg depending on category

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Work surface	25 mm wood-based panel with light oak melamine face and matching PVC edge band
Modesty panel	18 mm pale oak melamine-faced wood-based panel with edge-sealed perimeter
Perforated modesty rail	Perforated light gray steel sheet in a white steel frame
Leg frame	White powder-coated square steel tube with folding side supports
Pivot hardware	Steel hinge brackets with black manual release levers at both sides
Caster wheels	50 mm black nylon twin wheels with white hubs and swivel stems
Floor contact components	Gray non-marking bumpers at leg junctions and black caster tires
Fasteners	Zinc-plated steel bolts, nuts, and pivot pins
Surface finish	Smooth low-sheen laminate on panels with textured powder coating on steel
Internal panel core	Composite wood core presumed under melamine facing
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Tabletop flipping	Side lever releases the hinge so the rectangular top rotates 90 degrees from horizontal work to vertical nesting position
Nesting storage	Vertical flipped top and splayed leg geometry allow identical tables to roll together in compact rows
Mobile repositioning	Four swivel twin-wheel casters allow one-person movement across smooth indoor floors
Caster locking	2 lockable casters provide stationary-use restraint through wheel or directional brakes
Modesty screening	Full-width front panel conceals the seated user's legs and reduces under-table distraction
Cable and accessory rail	Perforated steel rail supports airflow and may accept hooks, baskets, or cable management accessories
Quick room reconfiguration	Flip, roll, and nest operation supports conversion between exam rows, clusters, and open space
Seated work support	750 mm surface height and open knee bay support standard task chairs and laptop or writing tasks
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Training classroom	Suitable for one-person exam and training layouts where 1200 mm tops provide writing and laptop space
Flexible meeting room	Supports rapid conversion from boardroom rows to grouped workshop layouts using flip-and-nest mobility
Co-working office	Fits hot-desk and temporary project zones because the table rolls and stores compactly when unused
Education institution	Appropriate for seminars and adult learning rooms with frequent room turnover and caster-based movement
Temporary event space	Provides a mobile work surface for registration, laptop, or breakout tasks on level indoor floors
Small office storage room	Vertical nesting reduces floor-area demand when backup tables are not in use

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 15372 durability and safety	Use commercial table strength, durability, and safety requirements for contract training-room use
EN 1730 table test methods	Reference loading, stability, and fatigue test methods for the work surface and folding frame
EN 12521 furniture strength guidance	Apply residential table strength criteria only where stricter contract requirements are absent
EN 13722 caster performance	Use swivel caster load and rolling requirements when specifying replacement casters

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.5

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324 dimensional and structural suitability	Use general technical requirements for wooden furniture dimensions, stability, and workmanship as the panel-table acceptance reference
GB/T 3325 metal furniture suitability	Apply metal furniture technical requirements to the steel folding frame, coating, and welded or bolted joints
GB/T 10357.6 stability test	Use table-class mechanical stability test criteria for acceptance of the mobile table in working position
GB 18580 emission limit	Specify formaldehyde emission verification for the wood-based panels in the top and modesty panel
GB/T 17657 panel test methods	Use laminate panel test methods for surface resistance, edge quality, and substrate performance verification

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324 dimensional and structural suitability：Use general technical requirements for wooden furniture dimensions, stability, and workmanship as the panel-table acceptance reference；
2. GB/T 3325 metal furniture suitability：Apply metal furniture technical requirements to the steel folding frame, coating, and welded or bolted joints；
3. GB/T 10357.6 stability test：Use table-class mechanical stability test criteria for acceptance of the mobile table in working position；
4. GB 18580 emission limit：Specify formaldehyde emission verification for the wood-based panels in the top and modesty panel；
5. GB/T 17657 panel test methods：Use laminate panel test methods for surface resistance, edge quality, and substrate performance verification；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · MFT-1200-OAK-C

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · MFT-1200-OAK-C

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · MFT-1200-OAK-C打开导出工具

页面快速操作

发布采购询价

产品描述

The Mobile Flip-Top Nesting Training Table is a practical public-furniture solution for rooms that must shift between focused work, group activities, and clear-floor storage. Model MFT-1200-OAK-C has a light oak melamine exterior with white steel framing, giving it a clean, neutral appearance suited to learning and office environments. Its rectangular top measures 1200 x 500 x 750 mm and is intended for one user. The 25 mm work surface uses a wood-based panel with a light oak melamine face and matching PVC edge band, while primary structural components are specified at 40 mm according to load-bearing role. A full-width 18 mm pale oak modesty panel conceals the seated user’s legs and helps reduce visual distraction beneath the table. Behind this, a perforated light gray steel rail set in a white steel frame supports airflow and can accept hooks, baskets, or cable-management accessories. The base is built from white powder-coated square steel tube with folding side supports. Steel hinge brackets and black manual release levers on both sides control the flip action. Squeezing or operating the side lever allows the top to rotate 90 degrees from a horizontal work position to a vertical nesting position. The splayed leg geometry and flipped profile let identical tables roll together into compact rows, reducing occupied floor space when backup tables are stored. Mobility is provided by four swivel casters with 50 mm black nylon twin wheels, white hubs, and swivel stems. Two casters lock by wheel or directional brakes to restrain the table during stationary use, while gray non-marking bumpers at the leg junctions and black caster tires form the floor-contact components. Fasteners include zinc-plated steel bolts, nuts, and pivot pins, and all moving parts allow a 5 mm operating clearance. Rated values include a 24 kg net weight, 80 kg distributed work-surface load, 30 kg concentrated panel load, 120 kg total dynamic caster load, 40 kg static lateral frame load, and a flip mechanism service life of 10,000 cycles. These characteristics make it appropriate for training classrooms, flexible meeting rooms, co-working offices, education settings, temporary event areas, and small office storage rooms. It supports exam rows, workshop clusters, registration points, hot-desking, and breakout tasks on level indoor floors. Procurement planning should note that each set is supplied unbranded in two cartons, with 0.8 cubic meters of packaging volume and 120 kg packaged gross weight. Reference assembly time is 40 minutes per set. Buyers should also confirm storage lanes, floor surfaces, delivery access, and required accessory compatibility before installation.

Mobile Flip-Top Nesting Training Table Specifications

供应商与现货