纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1200 × 500 × 750 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Product net weight	26 kg
Distributed top load	60 kg
Recommended users	2 persons
Caster dynamic load per set	100 kg total
Static floor load through casters	120 kg total
Folding cycle target	10000 cycles
Caster rolling durability	20000 cycles
Warranty period	3 years
Reference Static Load	150 kg depending on category
Moving-part Durability Reference	Acceptance target 50000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Work surface board	25 mm particleboard core with light oak melamine or laminate facing
Surface edge banding	Matching light woodgrain PVC or ABS edge banding with straight sealed edge
Front modesty panel	18 mm wood-composite panel with matching light woodgrain laminate face
Rear perforated panel	Powder-coated perforated steel sheet with round ventilation and cable-management holes
Folding support frame	White powder-coated welded steel tubing and formed hinge brackets
Frame pivot hardware	Steel hinge plates, riveted pivot axle and black release lever
Caster wheels	50 mm twin nylon wheels with black tread and white hubs
Caster sockets	Grey molded nylon or TPE leg sockets and caster housings
Fasteners	Zinc-plated or blackened steel bolts, cam blocks and lock nuts
Surface finish texture	Low-sheen woodgrain print with subtle linear grain
Protective foot components	Grey impact-resistant bumpers between splayed leg sections
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Fold-up worktop	Black side lever releases the hinge so the top rotates to a vertical storage position
Rapid room reconfiguration	Four 50 mm swivel casters allow one person to move the table between meeting layouts
Caster braking	Two casters include visible brake levers to lock the table during seated use
Nesting storage	Splayed side frames and folding top permit tables to be nested closely in a 190 mm storage depth
Privacy screening	Front modesty panel blocks the seated user's leg area from the opposite side
Cable or document management	Perforated rear tray accepts cables, small power adapters or training materials
No-tool daily setup	The release lever converts the table between writing and storage positions without removing parts
Side-by-side joining	Straight 1200 mm front and rear edges allow multiple identical units to form continuous training rows
Level mobility	Splayed twin-tube legs keep all four casters engaged on level carpet tile or hard-floor surfaces
Fixed working height	750 mm writing height is maintained by the deployed hinge frame without height adjustment
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Carton dimensions	1260 x 570 x 180 mm
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Training classroom	Two students can use laptops or manuals on the 1200 mm surface, while casters support room changes
Meeting room	Multiple units can form boardroom or workshop rows and then nest away after sessions
Examination or testing room	The 750 mm fixed height and front modesty panel provide consistent writing conditions and privacy
Co-working office	Teams can relocate tables for temporary project work without tools or fixed floor fixing
Hotel conference center	Light laminate surfaces and compact folded storage suit multi-room event turnover
Education maker space	The rear perforated tray helps route laptop cables or hold small shared materials during short activities

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 15372:2015 applicability	Use for durability, strength and safety requirements for non-domestic tables
EN 1730:2000 applicability	Use as the table test method for strength, durability and stability
EN 12521:2015 applicability	Use for safety, strength and durability requirements for domestic tables
EN 1022:2018 applicability	Use for seating-independent stability evaluation of free-standing tables

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.5

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2024 applicability	Use for general technical requirements, dimensions and inspection of wooden furniture panels
GB/T 3325-2017 applicability	Use for metal furniture structural inspection, coating integrity and hardware requirements
GB/T 10357.5-2011 applicability	Use for furniture surface physics and chemistry performance testing, including laminate wear and impact resistance
GB 18580-2017 applicability	Use for formaldehyde emission limits on wood-based panel components
GB/T 17907-2022 applicability	Use for general safety, stability and mechanical test methods for tables

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2024 applicability：Use for general technical requirements, dimensions and inspection of wooden furniture panels；
2. GB/T 3325-2017 applicability：Use for metal furniture structural inspection, coating integrity and hardware requirements；
3. GB/T 10357.5-2011 applicability：Use for furniture surface physics and chemistry performance testing, including laminate wear and impact resistance；
4. GB 18580-2017 applicability：Use for formaldehyde emission limits on wood-based panel components；
5. GB/T 17907-2022 applicability：Use for general safety, stability and mechanical test methods for tables；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · MFT-1200-500-WW

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · MFT-1200-500-WW

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · MFT-1200-500-WW打开导出工具

页面快速操作

发布采购询价

产品描述

The Mobile Fold-Top Training Table, model MFT-1200-WW, is an unbranded mobile folding training table designed for flexible learning, meeting, and event environments. Its light oak-look laminate surfaces give the table a clean woodgrain appearance, while the white powder-coated steel frame creates a light, structured contrast. The 1200 mm work surface is supported at a fixed 750 mm height and is intended for two users. A matching light woodgrain front modesty panel extends below the top to screen the seated leg area from the opposite side, and the rear perforated steel panel adds visual openness while providing ventilation and cable-management openings. The splayed side frames give the table a stable profile and allow units to nest compactly when the tops are folded. The work surface uses a 25 mm particleboard core with light oak melamine or laminate facing, finished with matching light woodgrain PVC or ABS edge banding and a straight sealed edge. Primary component thickness follows load-bearing role at 40 mm, and moving parts maintain 5 mm operating clearance. The front modesty panel is an 18 mm wood-composite panel with matching light woodgrain laminate. The folding structure uses white powder-coated welded steel tubing, formed hinge brackets, steel hinge plates, a riveted pivot axle, and a black release lever. Zinc-plated or blackened steel bolts, cam blocks, and lock nuts complete the frame hardware. Mobility is provided by four 50 mm swivel casters with twin nylon wheels, black treads, white hubs, and grey molded nylon or TPE sockets and housings. Two casters have visible brake levers to hold the table in place during seated use. The black side lever releases the hinge so the top rotates upward into a vertical storage position, enabling changeover between writing and storage configurations without tools or removed parts. When folded, tables can nest closely in a 190 mm storage depth, supporting rapid room reconfiguration by one person. The rear perforated tray can route cables, hold small power adapters, or contain training materials. Rated capacity includes a 60 kg distributed top load, 100 kg total dynamic caster load per set, and 120 kg total static floor load through the casters. The table has a net weight of 26 kg and durability targets of 10,000 folding cycles and 20,000 caster rolling cycles. This table suits training classrooms where two students use laptops or manuals, meeting rooms arranged in boardroom or workshop rows, examination rooms requiring consistent writing height and privacy, co-working offices needing temporary project layouts, hotel conference centers with frequent event turnover, and education maker spaces managing cables or shared materials. Procurement planning should note that each set ships in two cartons measuring 1260 by 570 by 180 millimeters, with a reference packaged gross weight of 120 kg per set, packaging volume of 0.8 cubic meter per set, and assembly time of 40 minutes per set.

Mobile Fold-Top Training Table with Laminate Top and Perforated Modesty Panel Specifications

供应商与现货