纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1200 × 500 × 750 mm
Overall footprint	1200 x 500 x 750 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	28 kg
Distributed top static load	80 kg
Vertical point-load acceptance target	30 kg on a 200 mm diameter area
Recommended users	2
Caster individual dynamic load rating	40 kg
Flip mechanism cycle target	10,000 cycles
Caster rolling durability target	20,000 cycles
Warranty period	3 years
Reference Static Load	150 kg depending on category
Moving-part Durability Reference	Acceptance target 50000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Work surface substrate	25 mm engineered-wood board with light gray laminate face
Impact edge	2 mm black PVC or ABS edge banding around the rounded top
Side support frame	Powder-coated silver-gray steel square tubing, 40 x 40 x 1.5 mm
Floor cantilever bases	Welded rectangular steel feet with black end caps
Modesty panel	18 mm dark gray panel with rounded corners and black edge trim
Pivot housings	Black glass-filled nylon or die-cast hinge housings with steel fasteners
Caster wheels	White nylon twin wheels with black rubberized tread and swivel crowns
Braking components	Black brake levers on swivel casters
Under-top rail	Silver powder-coated steel connecting rail with black end brackets
Surface finish	Low-glare light gray laminate and textured dark gray panel
Fasteners	Zinc-plated steel bolts, washers and axle pins
Foot buffers	Black molded polymer caps on floor-frame ends

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Flip-top operation	Side pivot mechanism rotates the top 90 degrees from horizontal use to vertical nesting
Pivot lock positions	2 lock positions at horizontal use and vertical nest
Mobility	Four swivel twin-wheel casters allow lateral movement and classroom repositioning
Parking brakes	2 brake-engaged casters lock wheel rotation during stationary use
Nested storage	Vertically flipped tops allow tables to be nested in rows with a 180 mm inter-table depth
Privacy screening	Full-width modesty panel shields the seated user's leg area from frontal view
Cable management	Under-top horizontal rail provides a 700 mm cable route and one visible black cable access cap
Seated access	Open end approach and central knee bay support standard task chairs at 750 mm working height
Table linking	Side pivot bracket includes a small gold-toned receiver suitable for a table connector pin
Floor adaptation	Swivel casters provide movement but do not include a visible height-leveling adjustment
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Export carton dimensions	1260 x 560 x 180 mm
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Corporate training room	Rows or clusters for 2 users per table support laptops, manuals and seminar materials
School or university classroom	Wheeled layout allows teachers to convert lecture seating into group-work islands
Meeting and breakout area	Neutral gray table works with task chairs in temporary workshops and project meetings
Examination or testing space	Flip nesting allows dense storage after tests and rapid deployment in multi-use halls
Co-working shared space	Tables can be linked or separated according to daily booking patterns
Temporary corporate events	Four casters and one-person assembly support short-term seminars and onboarding sessions

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 15372:2016	Strength, durability and safety requirements for non-domestic tables
EN 12521:2015	Safety, strength and durability requirements for domestic tables
EN 1728:2012	Seat and table test methods for strength and durability

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.5-2021	Vertical, horizontal and cyclic desk/table performance tests for commercial settings
ANSI/BIFMA e3-2019	Furniture sustainability framework for material, energy and social impacts

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2024	General technical requirements for wooden furniture, applicable to the laminated board top and edge bonding
GB/T 3325-2017	General technical requirements for metal furniture, applicable to the steel frame and welded base
GB 18584-2001	Indoor decorative materials limited release of formaldehyde in wood-based furniture
GB/T 10357.5-2011	Furniture mechanical surface test for strength, applicable to tabletop load acceptance

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2024：General technical requirements for wooden furniture, applicable to the laminated board top and edge bonding；
2. GB/T 3325-2017：General technical requirements for metal furniture, applicable to the steel frame and welded base；
3. GB 18584-2001：Indoor decorative materials limited release of formaldehyde in wood-based furniture；
4. GB/T 10357.5-2011：Furniture mechanical surface test for strength, applicable to tabletop load acceptance；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · FTM-1200-RECT-CASTER

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · FTM-1200-RECT-CASTER

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · FTM-1200-RECT-CASTER打开导出工具

页面快速操作

发布采购询价

产品描述

The Mobile Fold-Flip Training Table with Casters and Modesty Panel, model FTM-1200-RECT-CASTER, is an unbranded rectangular table designed for flexible teaching, meeting, and shared-work settings. Its overall footprint is 1200 x 500 x 750 mm, providing a two-person work surface with a clean, neutral appearance. The 25 mm engineered-wood substrate is finished in light gray laminate and edged with 2 mm black PVC or ABS banding around the rounded top. The frame uses silver-gray powder-coated steel square tubing, paired with welded rectangular steel feet, black end caps, and a dark gray modesty panel with rounded corners and black trim. White nylon twin wheels with black rubberized treads and swivel crowns give the table a distinct mobile base, while black brake levers provide a controlled stationary position. The table is built around a side pivot mechanism that rotates the top 90 degrees from horizontal use to vertical nesting. Two lock positions secure the top in the working and stored orientations. When flipped upright, tables can nest in rows, with an 180 mm inter-table depth that helps reduce storage footprint. Four swivel twin-wheel casters support lateral movement and quick classroom reconfiguration, while two brake-engaged casters lock wheel rotation when the table is in use. The full-width steel modesty panel screens the seated user’s leg area from frontal view, and the under-top silver steel rail creates a 700 mm cable route with one visible black cable access cap. The structure also uses black glass-filled nylon or die-cast hinge housings with steel fasteners and maintains a 5 mm operating clearance for moving parts. Rated for two users, the table supports laptops, manuals, seminar materials, and similar distributed loads. The distributed top static-load capacity is 80 kg, with a vertical point-load acceptance target of 30 kg on a 200 mm diameter area. Each caster has an individual dynamic load rating of 40 kg, while the flip mechanism and caster rolling durability targets are 10,000 cycles and 20,000 cycles respectively. The net weight is 28 kg. Suitable applications include corporate training rooms arranged in rows or clusters, school and university classrooms that change between lecture seating and group-work islands, and meeting or breakout areas used for workshops and project sessions. The flip-and-nest function also suits examination halls, multi-use rooms, co-working spaces, temporary corporate events, and onboarding programs where rapid deployment and dense storage matter. Procurement planning should note that one set ships in two export cartons measuring 1260 x 560 x 180 mm, with packaged gross weight of 120 kg per set and packaging volume of 0.8 cubic meter per set. Reference assembly time is 40 minutes per set. Material choices include laminate-faced engineered wood, powder-coated steel, steel paneling, PVC or ABS edge banding, and nylon casters, making specification review important for projects with particular finish or edge-band requirements.

Mobile Fold-Flip Training Table with Casters and Modesty Panel Specifications

供应商与现货