纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1200 × 450 × 760 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended static top load	50 kg
Recommended moving load	30 kg
Uniform distributed work-surface load	300 kg/m2
Net weight	24 kg
Caster individual dynamic load rating	40 kg
Adjustment cycles	10000 cycles
Top edge impact resistance	2 kg dropped from 150 mm
Recommended user capacity	2 adults
Seating capacity	2 users
Reference Static Load	150 kg depending on category

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Work surface	25 mm light gray laminate panel with black 2 mm PVC edge and rounded corners
Substrate	25 mm particleboard or MDF core under laminate
Modesty panel	18 mm dark gray melamine-faced panel with matching black edge banding
Side support columns	White powder-coated rectangular steel tube, 60 x 40 x 1.5 mm
Horizontal feet	White powder-coated cantilever steel C-feet with welded end sockets
Tilt-lock housing	Glass-filled nylon or die-cast aluminum housing with black rotary dial and steel pivot shaft
Height-locking inserts	Steel sleeve with spring-loaded indexing pin and black release lever
Casters	Four 50 mm twin-wheel swivel casters with white nylon wheels, black tires, and steel mounting stems
Fasteners	Zinc-plated steel bolts, washers, and lock nuts for frame, pivot, and caster joints
Foot buffers	Black polymer end caps at column-to-foot joints to reduce abrasion and noise
Surface finish	Smooth low-gloss light gray top, matte dark panel, and textured white powder coat
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Tilt-and-fold top	Rotary side dial releases the top to tilt vertically to 90 degrees for nesting and compact storage
Height adjustment	Dual side support columns adjust between indexed positions through a spring pin and lever, ending at 760 mm
Positive tilt lock	Circular lock dial secures the horizontal work position and folded position using an indexed steel pin
Horizontal working mode	Top locks flat for writing, laptop work, examinations, and two-person training sessions
Mobile reconfiguration	Four swivel casters allow one person to steer and reposition the 24 kg table on level indoor floors
Nesting storage	Tilted top and open C-feet allow tables to be nested in rows with a stored depth of 220 mm per unit
Static stabilization	Rigid C-feet and four-wheel contact provide a stable footprint; brakes should be specified for fixed classrooms
Side-access operation	Primary tilt release is located at the right end panel for operation while standing beside the table
Tilt pivot center height	690 mm
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Corporate training room	Use two-person tables in rows or groups for notebooks, laptops, and frequent room turnover
Classroom or examination area	Deploy with matched-height task chairs; the 760 mm top suits adult and upper-grade students
Meeting breakout space	Roll tables into small clusters and fold them away after workshops
Temporary presentation area	Set up a compact instructor or registration table near displays, doors, or training equipment
Shared office neighborhood	Use as a temporary project, laptop, or document-review surface for two staff
Storage room or hospitality back-of-house	Nest folded tables to reduce floor space when not in use

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 15372:2008+A1:2016	Safety, strength, and durability requirements for non-domestic tables in contract environments
EN 1729-1:2015	Functional dimensions and safety requirements for educational seating and tables; relevant if used in schools
EN 1729-2:2015	Safety, strength, and durability test methods for educational furniture
EN 12521:2015	Safety, strength, and durability requirements for domestic tables; useful only if non-contract standard is not specified

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.5-2021	Office and institutional tables: static, dynamic, leg-strength, drop, and stability test reference
BIFMA E3-2023 Level	Multi-attribute sustainability framework for materials, energy, human health, and social impacts

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2024	Applies to dimensions, workmanship, surface quality, and stability acceptance of wooden furniture panels
GB/T 3325-2017	Applies to metal furniture structural requirements, welded frame quality, and finish inspection
GB 18580-2017	Formaldehyde emission limit for wood-based panels; require E1 or lower declaration and test report
GB/T 10357.5-2011	Furniture surface physics and chemistry test method for coating and laminate resistance to wear, heat, and contamination
GB/T 10357.7-2013	Table strength and stability test reference for vertical load, horizontal force, and tipping checks

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2024：Applies to dimensions, workmanship, surface quality, and stability acceptance of wooden furniture panels；
2. GB/T 3325-2017：Applies to metal furniture structural requirements, welded frame quality, and finish inspection；
3. GB 18580-2017：Formaldehyde emission limit for wood-based panels; require E1 or lower declaration and test report；
4. GB/T 10357.5-2011：Furniture surface physics and chemistry test method for coating and laminate resistance to wear, heat, and contamination；
5. GB/T 10357.7-2013：Table strength and stability test reference for vertical load, horizontal force, and tipping checks；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · MTT-C12045-TILT-W

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · MTT-C12045-TILT-W

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · MTT-C12045-TILT-W打开导出工具

页面快速操作

发布采购询价

产品描述

The Mobile Height-Adjustable Tilting Training Table, model MTT-C12045-TILT-W, is an unbranded two-tone training table designed for flexible indoor learning, meeting, and office settings. Its light gray laminate work surface has a black PVC edge and rounded corners, paired with a dark gray modesty panel and a white powder-coated steel structure. Rectangular side columns connect to cantilever C-feet, giving the table an open, functional silhouette while supporting tilt, height adjustment, movement, and nesting. The frame uses black control elements, white nylon twin-wheel casters with black tires, and zinc-plated steel fasteners for a clean, practical appearance. The 25 mm work surface is built on a particleboard or MDF core and finished with a 2 mm black PVC edge. The 18 mm dark gray melamine-faced modesty panel includes matching black edge banding. Side support columns are 60 by 40 by 1.5 mm powder-coated rectangular steel tube, while the horizontal C-feet use welded end sockets. Tilt control is housed in glass-filled nylon or die-cast aluminum with a black rotary dial and steel pivot shaft. Height positions are controlled by steel sleeves, spring-loaded indexing pins, and black release levers. Four 50 mm swivel casters use steel mounting stems. Primary load-bearing components are 40 mm thick, and moving parts maintain 5 mm operating clearance. A side rotary dial releases the top to tilt vertically to 90 degrees, allowing tables to nest in rows at a stored depth of 220 mm per unit. The indexed pin locks the top securely in both horizontal and folded positions. Dual support columns provide height adjustment through indexed positions, ending at a 760 mm working height suited to adult and upper-grade students when used with matched-height task chairs. In the flat position, the table supports writing, laptop work, examinations, and two-person training sessions. Four swivel casters let one person move and steer the 24 kg table on level indoor floors, while the rigid C-feet and four-wheel contact create a stable footprint. Braked casters should be specified for fixed classrooms. The recommended static top load is 50 kg, the recommended moving load is 30 kg, and the uniform distributed work-surface load is 300 kg per square meter. Each caster has a 40 kg individual dynamic load rating. The adjustment system is rated for 10,000 cycles, and edge impact resistance is specified for a 2 kg weight dropped from 150 mm. This table is appropriate for corporate training rooms, classrooms, examination areas, meeting breakout spaces, temporary presentation or registration points, shared office neighborhoods, and storage or hospitality back-of-house areas. It is especially useful where rooms frequently change between rows, small clusters, and open space. Procurement planning should note one set ships in two cartons, with 0.8 cubic meter packaging volume, 120 kg packaged gross weight, and 40 minutes reference assembly time per set.

Mobile Height-Adjustable Tilting Training Table Specifications

供应商与现货